Commit Graph

31 Commits

Author SHA1 Message Date
Chris Metcalf 1bb50cad45 arch/tile: move user_exit() to early kernel entry sequence
This ensures that we always notify context tracking that we
have exited from user space no matter how we enter the kernel.
It is similar to how arm64 handles context tracking, for example.

This allows the removal of all the exception_enter() calls that
were added in commit 49e4e15619 ("tile: support CONTEXT_TRACKING and
thus NOHZ_FULL").

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2016-01-18 14:49:30 -05:00
Chris Metcalf 9ce815ed50 tile: fix bug in setting PT_FLAGS_DISABLE_IRQ on kernel entry
This flag value is saved in ptregs and used to decide whether
to disable irqs when returning from the kernel.  Commit 1168df528fe4
("tile: don't assume user privilege is zero") performed a bad
merge from some KVM-enabled code that had not yet been upstreamed.

The only issue with the old code is that we will read the interrupt
mask in more conditions than we need to (e.g., coming from user
space when user space has the Interrupt Critical Section bit set, or
coming from a guest kernel), which is a slow multi-cycle operation.
This change saves those few cycles in the common case.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2016-01-18 14:49:26 -05:00
Chris Metcalf 583b24a210 arch/tile: adopt prepare_exit_to_usermode() model from x86
This change is a prerequisite change for TASK_ISOLATION but also
stands on its own for readability and maintainability.  The existing
tile do_work_pending() was called in a loop from assembly on
the slow path; this change moves the loop into C code as well.
For the x86 version see commit c5c46f59e4 ("x86/entry: Add new,
comprehensible entry and exit handlers written in C").

This change exposes a pre-existing bug on the older tilepro platform;
the singlestep processing is done last, but on tilepro (unlike tilegx)
we enable interrupts while doing that processing, so we could in
theory miss a signal or other asynchronous event.  A future change
could fix this by breaking the singlestep work into a "prepare"
step done in the main loop, and a "trigger" step done after exiting
the loop.  Since this change is intended as purely a restructuring
change, we call out the bug explicitly now, but don't yet fix it.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2016-01-18 14:49:09 -05:00
Chris Metcalf a0ddef81f4 tile: enable full SECCOMP support
Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-07-30 12:32:16 -04:00
Chris Metcalf e5701b74cc tile: support delivering NMIs for multicore backtrace
A new hypervisor service was added some time ago (MDE 4.2.1 or
later, or MDE 4.3 or later) that allows cores to request NMIs
to be delivered to other cores.  Use this facility to deliver
a request that causes a backtrace to be generated on each core,
and hook it into the magic SysRq functionality.

Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-05-11 11:22:31 -04:00
Zhigang Lu ba67823163 tile: Enable NMIs on return from handle_nmi() without errors
NMI interrupts mask ALL interrupts before calling the handler,
so we need to unmask NMIs according to the value handle_nmi() returns.
If it returns zero, the NMIs should be re-enabled; if it returns
a non-zero error, the NMIs should be disabled.

Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-07 11:19:48 -05:00
Zhigang Lu 8e3441ebab tile: Add support for handling PMC hardware
The PMC module is used by perf_events, oprofile and watchdogs.

Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-07 11:19:47 -05:00
Chris Metcalf 3f725c5b92 tile: ensure interrupts disabled for preempt_schedule_irq()
When coming from a page fault (for example), interrupts might
be enabled as we enter the code to return from interrupt.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-27 16:09:43 -04:00
Chris Metcalf d7c9661115 tile: remove support for TILE64
This chip is no longer being actively developed for (it was superceded
by the TILEPro64 in 2008), and in any case the existing compiler and
toolchain in the community do not support it.  It's unlikely that the
kernel works with TILE64 at this point as the configuration has not been
tested in years.  The support is also awkward as it requires maintaining
a significant number of ifdefs.  So, just remove it altogether.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:29 -04:00
Chris Metcalf acbde1db29 tile: parameterize VA and PA space more cleanly
The existing code relied on the hardware definition (<arch/chip.h>)
to specify how much VA and PA space was available.  It's convenient
to allow customizing this for some configurations, so provide symbols
MAX_PA_WIDTH and MAX_VA_WIDTH in <asm/page.h> that can be modified
if desired.

Additionally, move away from the MEM_XX_INTRPT nomenclature to
define the start of various regions within the VA space.  In fact
the cleaner symbol is, for example, MEM_SV_START, to indicate the
start of the area used for supervisor code; the actual address of the
interrupt vectors is not as important, and can be changed if desired.
As part of this change, convert from "intrpt1" nomenclature (which
built in the old privilege-level 1 model) to a simple "intrpt".

Also strip out some tilepro-specific code supporting modifying the
PL the kernel could run at, since we don't actually support using
different PLs in tilepro, only tilegx.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:47:34 -04:00
Chris Metcalf 051168df52 tile: don't assume user privilege is zero
Technically, user privilege is anything less than kernel
privilege.  We modify the existing user_mode() macro to have
this semantic (and use it in a couple of places it wasn't being
used before), and add an IS_KERNEL_EX1() macro to the assembly
code as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:45:52 -04:00
Chris Metcalf 35f059761c tilegx: change how we find the kernel stack
Previously, we used a special-purpose register (SPR_SYSTEM_SAVE_K_0)
to hold the CPU number and the top of the current kernel stack
by using the low bits to hold the CPU number, and using the high
bits to hold the address of the page just above where we'd want
the kernel stack to be.  That way we could initialize a new SP
when first entering the kernel by just masking the SPR value and
subtracting a couple of words.

However, it's actually more useful to be able to place an arbitrary
kernel-top value in the SPR.  This allows us to create a new stack
context (e.g. for virtualization) with an arbitrary top-of-stack VA.
To make this work, we now store the CPU number in the high bits,
above the highest legal VA bit (42 bits in the current tilegx
microarchitecture).  The full 42 bits are thus available to store the
top of stack value.  Getting the current cpu (a relatively common
operation) is still fast; it's now a shift rather than a mask.

We make this change only for tilegx, since tilepro has too few SPR
bits to do this, and we don't need this support on tilepro anyway.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:58 -04:00
Chris Metcalf 9ae0983847 tile: provide traceability for hypervisor calls
This change adds infrastructure (CONFIG_TILE_HVGLUE_TRACE) that
provides C code wrappers for the calls the kernel makes to the Tilera
hypervisor.  This allows standard kernel infrastructure like FTRACE to
be able to instrument hypervisor calls.

To allow direct calls to the true API, we export their names with a
leading underscore as well.  This is important for the few contexts
where we need to make hypervisor calls without touching the stack.

As part of this change, we also switch from creating the symbols
with linker magic to creating them with assembler magic.  This lets
us provide a symbol type and generally make them appear more as symbols
and less as just random values in the Elf namespace.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:31 -04:00
Chris Metcalf 70d2b5958a tile: improve illegal translation interrupt handling
First, don't re-enable interrupts blindly in the Linux trap handler.
We already handle page faults this way; synchronous interrupts like
ILL_TRANS will fire even when interrupts are disabled, and we don't
want to re-enable interrupts in that case.

For ILL_TRANS, we now pass the ILL_VA_PC reason into the trap handler
so we can report it properly; this is the address that caused the
illegal translation trap.  We print the address as part of the
pr_alert() message now if it's coming from the kernel.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:13 -04:00
Chris Metcalf bc1a298f4e tile: support CONFIG_PREEMPT
This change adds support for CONFIG_PREEMPT (full kernel preemption).
In addition to the core support, this change includes a number
of places where we fix up uses of smp_processor_id() and per-cpu
variables.  I also eliminate the PAGE_HOME_HERE and PAGE_HOME_UNKNOWN
values for page homing, as it turns out they weren't being used.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:01 -04:00
Chris Metcalf 2f9ac29eec tile: fast-path unaligned memory access for tilegx
This change enables unaligned userspace memory access via a kernel
fast path on tilegx.  The kernel tracks user PC/instruction pairs
per-thread using a direct-mapped cache in userspace.  The cache
maps those PC/instruction pairs to JIT'ed instruction sequences that
load or store using byte-wide load store intructions and then
synthesize 2-, 4- or 8-byte load or store results.  Once an
instruction has been seen to generate an unaligned access once,
subsequent hits on that instruction typically require overhead
of only around 50 cycles if cache and TLB is hot.

We support the prctl() PR_GET_UNALIGN / PR_SET_UNALIGN sys call to
enable or disable unaligned fixups on a per-process basis.

To do this we pull some of the tilepro unaligned support out of the
single_step.c file; tilepro uses instruction disassembly for both
single-step and unaligned access support.  Since tilegx actually has
hardware singlestep support, though, it's cleaner to keep the tilegx
unaligned access code in a separate file.  While we're at it,
properly rename the tilepro-specific types, etc., to have tilepro
suffixes instead of generic tile suffixes.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:04:10 -04:00
Simon Marchi ef567f25d5 tile: support TIF_SYSCALL_TRACEPOINT; select HAVE_SYSCALL_TRACEPOINTS
This patch adds support for the TIF_SYSCALL_TRACEPOINT on the tile
architecture. Basically, it calls the appropriate tracepoints on syscall
entry and exit.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-03-22 15:46:18 -04:00
Simon Marchi ef18272453 arch/tile: Call tracehook_report_syscall_{entry,exit} in syscall trace
Call tracehook functions for syscall tracing.

The check for TIF_SYSCALL_TRACE was removed, because the same check is
done right before in the assembly file.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [with ptrace.h fixup]
2013-03-21 15:39:34 -04:00
Chris Metcalf 570fd50153 tile: tag some code with #ifdef CONFIG_COMPAT
This allows us to disable COMPAT mode without a link error.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-02-08 13:20:43 -05:00
Chris Metcalf 6b14e4198c arch/tile: eliminate pt_regs trampolines for syscalls
Using the new current_pt_regs() model, we can remove some trampolines
from assembly code and call directly to the C syscall implementations.
rt_sigreturn() and clone() still need some assembly wrapping, but no
longer are passed a pt_regs pointer.  sigaltstack() and the
tilepro-specific cmpxchg_badaddr() syscalls are now just straight C.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-10-23 16:23:58 -04:00
Al Viro 530550651f tile: switch to generic sys_execve()
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-23 13:40:12 -04:00
Chris Metcalf 0f8b983812 tile: support GENERIC_KERNEL_THREAD and GENERIC_KERNEL_EXECVE
Also provide an optimized current_pt_regs() while we're at it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-20 13:13:29 -04:00
Al Viro 733deca197 Drop struct pt_regs * argument in compat_sys_execve()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-20 13:13:11 -04:00
Chris Metcalf b8ace0833f arch/tile: fix hardwall for tilegx and generalize for idn and ipi
The hardwall drain code was not properly implemented for tilegx,
just tilepro, so you couldn't reliably restart an application that
made use of the udn.

In addition, the code was only applicable to the udn (user dynamic
network).  On tilegx there is a second user network that is available
(the "idn"), and there is support for having I/O shims deliver
user-level interrupts to applications ("ipi") which functions in a
very similar way to the inter-core permissions used for udn/idn.
So this change also generalizes the code from supporting just the udn
to supports udn/idn/ipi on tilegx.

By default we now use /dev/hardwall/{udn,idn,ipi} with separate
minor numbers for the three devices.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 12:48:27 -04:00
Chris Metcalf 51007004f4 arch/tile: use interrupt critical sections less
In general we want to avoid ever touching memory while within an
interrupt critical section, since the page fault path goes through
a different path from the hypervisor when in an interrupt critical
section, and we carefully decided with tilegx that we didn't need
to support this path in the kernel.  (On tilepro we did implement
that path as part of supporting atomic instructions in software.)

In practice we always need to touch the kernel stack, since that's
where we store the interrupt state before releasing the critical
section, but this change cleans up a few things.  The IRQ_ENABLE
macro is split up so that when we want to enable interrupts in a
deferred way (e.g. for cpu_idle or for interrupt return) we can
read the per-cpu enable mask before entering the critical section.
The cache-migration code is changed to use interrupt masking instead
of interrupt critical sections.  And, the interrupt-entry code is
changed so that we defer loading "tp" from per-cpu data until after
we have released the interrupt critical section.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-25 12:48:20 -04:00
Chris Metcalf fc327e268f arch/tile: fix up some issues in calling do_work_pending()
First, we were at risk of handling thread-info flags, in particular
do_signal(), when returning from kernel space.  This could happen
after a failed kernel_execve(), or when forking a kernel thread.
The fix is to test in do_work_pending() for user_mode() and return
immediately if so; we already had this test for one of the flags,
so I just hoisted it to the top of the function.

Second, if a ptraced process updated the callee-saved registers
in the ptregs struct and then processed another thread-info flag, we
would overwrite the modifications with the original callee-saved
registers.  To fix this, we add a register to note if we've already
saved the registers once, and skip doing it on additional passes
through the loop.  To avoid a performance hit from the couple of
extra instructions involved, I modified the GET_THREAD_INFO() macro
to be guaranteed to be one instruction, then bundled it with adjacent
instructions, yielding an overall net savings.

Reported-By: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-05-16 16:01:16 -04:00
Chris Metcalf e1d5c01950 arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally
The return path as we reload registers and core state requires that r30
hold a boolean indicating whether we are returning from an NMI, but in a
couple of cases we weren't setting this properly, with the result that we
could accidentally unmask the NMI interrupt(s), which could cause confusion.
Now we set r30 in every place where we jump into the interrupt return path.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:14:03 -04:00
Chris Metcalf 2858f85602 arch/tile: fix single-stepping over swint1 instructions on tilegx
If we are single-stepping and make a syscall, we call ptrace_notify()
explicitly on the return path back to user space, since we are returning
to a pc value set artificially to the next instruction, and otherwise
we won't register that we stepped over the syscall instruction (swint1).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:13:36 -04:00
Chris Metcalf a714ffff36 arch/tile: fix up some minor trap handling issues
We now respond to MEM_ERROR traps (e.g. an atomic instruction to
non-cacheable memory) with a SIGBUS.

We also no longer generate a console crash message if a user
process die due to a SIGTRAP.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:12:52 -04:00
Chris Metcalf e17235382d arch/tile: work around a hardware issue with the return-address stack
In certain circumstances we need to do a bunch of jump-and-link
instructions to fill the hardware return-address stack with nonzero values.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-04-02 12:12:48 -04:00
Chris Metcalf 18aecc2b64 arch/tile: finish enabling support for TILE-Gx 64-bit chip
This support was partially present in the existing code (look for
"__tilegx__" ifdefs) but with this change you can build a working
kernel using the TILE-Gx toolchain and ARCH=tilegx.

Most of these files are new, generally adding a foo_64.c file
where previously there was just a foo_32.c file.

The ARCH=tilegx directive redirects to arch/tile, not arch/tilegx,
using the existing SRCARCH mechanism in the top-level Makefile.

Changes to existing files:

- <asm/bitops.h> and <asm/bitops_32.h> changed to factor the
  include of <asm-generic/bitops/non-atomic.h> in the common header.

- <asm/compat.h> and arch/tile/kernel/compat.c changed to remove
  the "const" markers I had put on compat_sys_execve() when trying
  to match some recent similar changes to the non-compat execve.
  It turns out the compat version wasn't "upgraded" to use const.

- <asm/opcode-tile_64.h> and <asm/opcode_constants_64.h> were
  previously included accidentally, with the 32-bit contents.  Now
  they have the proper 64-bit contents.

Finally, I had to hack the existing hacky drivers/input/input-compat.h
to add yet another "#ifdef" for INPUT_COMPAT_TEST (same as x86_64).

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> [drivers/input]
2011-05-12 15:52:12 -04:00