linux/drivers/net/phy
Johan Hovold d0e1df9cf4 net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
Use generic config_init callback also for KSZ8021 and KSZ8031.

This has been avoided this far due to commit b838b4aced ("phy/micrel:
KSZ8031RNL RMII clock reconfiguration bug"), which claims that the PHY
becomes unresponsive if the broadcast-disable flag is set before
configuring the clock mode.

Turns out that the problem seemingly worked-around by the above
mentioned commit was really due to a hardware-configuration issue, where
the PHY was in fact strapped to address 3 rather than 0.

Tested-by: Bruno Thomsen <bth@kamstrup.dk>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-26 16:19:50 -05:00
..
Kconfig
Makefile
amd-xgbe-phy.c
amd.c
at803x.c
bcm7xxx.c
bcm63xx.c
bcm87xx.c
broadcom.c
cicada.c
davicom.c
dp83640.c
dp83640_reg.h
et1011c.c
fixed_phy.c
icplus.c
lxt.c
marvell.c
mdio-bcm-unimac.c
mdio-bitbang.c
mdio-gpio.c
mdio-moxart.c
mdio-mux-gpio.c
mdio-mux-mmioreg.c
mdio-mux.c
mdio-octeon.c
mdio-sun4i.c
mdio_bus.c
micrel.c net: phy: micrel: use generic config_init for KSZ8021/KSZ8031 2014-12-26 16:19:50 -05:00
national.c
phy.c
phy_device.c
qsemi.c
realtek.c
smsc.c
spi_ks8995.c
ste10Xp.c
vitesse.c