If you miss a wait event, you can catch up by doing listinvoices and
getting the max of these fields. It's also a good debugging clue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have defined ordering, we can add a start param.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listinvoices` has `index` and `start` parameters for listing control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
Rune functionality moved into core from commando plugin.
Changelog-Added: JSON-RPC: `checkrune`: check rune validity for authorization; `createrune` to create/modify rune; `listrunes` to list existing runes; `blacklistrune` to revoke permission of rune
Changelog-Deprecated: JSON-RPC: `commando-rune`, `commando-listrunes` and `commando-blacklist`.
No-schema-diff-check
This is needed when we know we're *opening* an anchor channel, to
override the "do we already have an anchor channel open?" logic.
Also, document the nonwrapped arg added in v23.02.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundpsbt` and `utxopsbt` new parameter `opening_anchor_channel` so lightningd knowns it needs emergency reserve for anchors.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
Since we can CPFP, we don't have to track the feerate as closely. But
it still needs to get in the mempool, so we use 10 sat/byte, or the
100 block estimate if that is higher.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `feerates` has new fields `unilateral_anchor_close` to show the feerate used for anchor channels (currently experimental), and `unilateral_close_nonanchor_satoshis`.
Changelog-Changed: JSON-RPC: `feerates` `unilateral_close_satoshis` now assumes anchor channels if enabled (currently experimental).
It depends on whether we negotiated anchors: just document that this
field doesn't apply for anchors (it becomes zero by the end of this
patch series, which is weird).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only implemented for min-capacity-sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `setconfig` allows a limited number of configuration settings to be changed without restart.
To test, we do min-capacity-sat which is simple. We also update the
listconfigs man page which contained some obsolete information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `listconfigs` direct fields, use `configs` sub-object and `set`, `value_bool`, `value_str`, `value_int`, or `value_msat` fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use multi-specifiable options elsewhere, this is just another.
Otherwise you can't add, you can only set them all.
Changelog-Added: Config: `accept-htlc-tlv-type` (replaces awkward-to-use `accept-htlc-tlv-types`)
Changelog-Deprecated: Config: `accept-htlc-tlv-types` (use `accept-htlc-tlv-type` multiple times)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listconfigs is convenient, but it doesn't handle multi-options well: it
outputs an object with duplicate fields in this case (e.g. log-file), nor
is it extensible to show more than raw values.
However, listconfigs doesn't do what other list commands do (use a
sub-object "configs") so we can put the new values under that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listconfigs` now has `configs` subobject with more information about each config option.
This obsoletes the use of --announce-addr-dns which I know Michael
didn't really like either.
Changelog-Deprecated: Config: `announce-addr-dns`; use `--bind-addr=dns:ADDR` for finer control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tested this indeed breaks if we don't accept it, then implemented
the code to accept it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: protocol: We now correctly accept the `option_scid_alias` bit in `open_channel` `channel_type`.
Changelog-Deprecated: protocol: Not setting `option_scid_alias` in `option_channel` `channel_type` for unannounced channels.
Changelog-Added: JSON-RPC: `feerates`: added `floor` field for current minimum feerate bitcoind will accept
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Drop try_get_feerate() in favor of explicit feerate_for_deadline() and
smoothed_feerate_for_deadline().
This shows us everywhere we deal with old-style feerates by names.
`delayed_to_us` and `htlc_resolution` will be moving to dynamic fees,
so deprecate those.
Note that "penalty" is still used for generating penalty txs for
watchtowers, and "unilateral_close" still used until we get zero-fee
anchors.
Changelog-Added: JSON-RPC: `feerates` `estimates` array shows fee estimates by blockcount from underlying plugin (usually *bcli*).
Changelog-Changed: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) value *slow* is now 100 block-estimate, not half of 100-block estimate.
Changelog-Deprecated: JSON-RPC: `close`, `fundchannel`, `fundpsbt`, `multifundchannel`, `multiwithdraw`, `txprepare`, `upgradewallet`, `withdraw` `feerate` (`feerange` for `close`) expressed as, "delayed_to_us", "htlc_resolution", "max_acceptable" or "min_acceptable". Use explicit block counts or *slow*/*normal*/*urgent*/*minimum*.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we're messing with feerates, it's good to test this directly upfront.
Also, fix documentation!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out the two bcli replacements I checked (`sauron` and
`trustedcoin`) don't even implement this, and the multiplier makes
more sense in lightningd, especially as we move to bcli just providing
raw feerate estimates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listclosedchannels` to show old, dead channels we previously had with peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As reported on Discord, these are undocumented. And thus, um, hard to find!
Reported-by: Aaron Barnard
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These were deprecated in v0.12.0, hence scheduled for removal next version anyway
(use local_fund_msat and remote_funds_msat).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's not spec-final yet (hell, it's not even properly specified
yet!) we need to put it behind an experimental flag.
Unfortunately, we don't have support for doing this in a plugin; a
plugin must present features before parsing options. So we need to do
it in core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Though there's already a `createinvoice` command, there are usecases where a
user may want to sign an invoice that they don't yet have the preimage to. For
example, they may have an htlc_accepted plugin that pays to obtain the preimage
from someone else and returns a `{ "result": "resolve", ... }`.
This RPC command addresses this usecase without overly complicating the
semantics of the existing `createinvoice` command.
Changelog-Added: JSON-RPC: `signinvoice` new command to sign BOLT11
invoices.
v2 opens require you to use native segwit inputs
Changelog-Added: JSONRPC: `upgradewallet` command, sweeps all p2sh-wrapped outputs to a native segwit output
There were cases where address it's empty, and this cases are not right if the
field is considered optional.
This makes it required and add the field also when `--offline` is set.
Changelog-Changed: JSON-RPC: `getinfo` `address` array is always present (though may be empty)
Also, put the "added" lines in the request schemas for new commands:
this doesn't do anything (yet?) but it keeps `make schema-added-check` happy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, we generate the schema part from the plugin itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `sql` plugin command to perform server-side complex queries.
`"deprecated": true` is obsolete; we don't document them anyway.
Where it would have otherwise changed the GRPC wrappers, I actually put the
version number in.
We allow "listchannels" to have "satoshis" since we have some tests
that run in deprecated-api mode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a core concept in the spec which isn't directly exposed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listchannels` added a `direction` field (0 or 1) as per gossip specification.
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
We removed the command for v22.11.
Also, we removed the `refund_for` offer parameter, so remove its description
from the manpage.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our pay code handles this correctly, but decode was still using an old model
where there was a payinfo per hop, not per path.
Reported-by: @t-bast
See: #5823
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This switch was not doing anything useful anymore.
We deprecate it anyways to notify the user about the new switch.
Changelog-Deprecated: The old --disable-ip-discovery config switch
This adds the option to explicitly enable ip-discovery, which maybe
helpful for example when a user wants TOR announced along with
discovered IPs to improve connectivity and have TOR just as a fallback.
Changelog-Added: Adds config switch 'announce-addr-discovered': on/off/auto
Some are best copied into the schema, but some are already
out-of-date, so cleanest to remove them and rely on the generated (and
thus, checked!) fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `listpeerchannels` now contains information on direct channels with our peers.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
TODO: It would be great to similarly annotate new/deprecated commands and
their parameters.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: doc: we now annotate what versions JSON field additions and deprecations happenened.
This means we will document deprecations and additions, rather than just
pretending they've always been that way!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. When we receive a commando command from a remote using the `filter`
field, use it.
2. Add a `filter` parameter to `commando` to send it: this is usually
more efficient than using filtering locally.
Of course, older remote nodes will ignore the filter, but that's
harmless.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `commando` now supports `filter` as a parameter (for send and receive).
This broke BTCPayServer, so revert. I originally (accidentally!)
implemented this such that it broadcast both DNS and IP entries, but
Michael reported earlier that they still don't propagage well, so
simply suppress them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5795
Changelog-Changeed: Config: `announce-addr-dns` needs to be set to *true* to put DNS names into node announcements, otherwise they are suppressed.
Changelog-Deprecated: Config: `announce-addr-dns` (currently defaults to `false`). This will default to `true` once enough of the network has upgraded to understand DNS entries.
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listfunds` now lists coinbase outputs as 'immature' until they're spendable
Changelog-Changed: JSON-RPC: UTXOs aren't spendable while immature
We need to print out first_node_id, and "node_id" is now called
"blinded_node_id" in the spec.
And the schema didn't include the payment fields in the blinded path
for invoices (which broke as soon as we actually tested one!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
We have to allow them (as otherwise `fees_collected_msat` in getinfo breaks),
but it means that actually, in_htlc_id might be missing in listforwards
(also, out_htlc_id might be missing, which we didn't catch before).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5628
This is actually what the autoclean plugin wants, especially since
you can't otherwise delete a payment which has failed then succeeded.
But insist on neither or both being specified, at least for now.
Changelog-Added: JSON-RPC: `delpay` takes optional `groupid` and `partid` parameters to specify exactly what payment to delete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previous commit was a hack which *always* batched where possible, this
is a more sophisticated opt-in varaint, with a timeout sanity check.
Final performance for cleaning up 1M pays/forwards/invoices:
```
$ time l1-cli autoclean-once succeededpays 1
{
"autoclean": {
"succeededpays": {
"cleaned": 1000000,
"uncleaned": 26895
}
}
}
real 6m9.828s
user 0m0.003s
sys 0m0.001s
$ time l2-cli autoclean-once succeededforwards 1
{
"autoclean": {
"succeededforwards": {
"cleaned": 1000000,
"uncleaned": 40
}
}
}
real 3m20.789s
user 0m0.004s
sys 0m0.001s
$ time l3-cli autoclean-once paidinvoices 1
{
"autoclean": {
"paidinvoices": {
"cleaned": 1000000,
"uncleaned": 0
}
}
}
real 6m47.941s
user 0m0.001s
sys 0m0.000s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `batching` command to allow database transactions to cross multiple back-to-back JSON commands.
And remove deprecated autocleaninvoice docs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `autoclean-status` command to see what autoclean is doing.
Changelog-Deprecated: JSON-RPC: `autocleaninvoice` (use option `autoclean-expiredinvoices-age`)