Disconnecting a peer after openingd fails is not instantaneous:
we abort the open, so openingd sends out a WIRE_ERROR which makes
connectd close the connection.
As a result this test fails often. The simplest fix is to wait for a
second in multifundchannel before retrying, which is also robust
against behaviour changes if we decide *not* to disconnect in future.
Also make sure that addrhint ownership is correct, since this can
lead to a use-after-free if we filter dests.
```
tests/test_connection.py::test_multifunding_best_effort FAILED [100%]
======================================================= FAILURES ========================================================
_____________________________________________ test_multifunding_best_effort _____________________________________________
node_factory = <pyln.testing.utils.NodeFactory object at 0x7f6c0c95c1c0>
bitcoind = <pyln.testing.utils.BitcoinD object at 0x7f6c0c92a880>
@pytest.mark.openchannel('v1')
@pytest.mark.developer("disconnect=... needs DEVELOPER=1")
def test_multifunding_best_effort(node_factory, bitcoind):
'''
Check that best_effort flag works.
'''
disconnects = ["-WIRE_INIT",
"-WIRE_ACCEPT_CHANNEL",
"-WIRE_FUNDING_SIGNED"]
l1 = node_factory.get_node()
l2 = node_factory.get_node()
l3 = node_factory.get_node(disconnect=disconnects)
l4 = node_factory.get_node()
l1.fundwallet(2000000)
destinations = [{"id": '{}@localhost:{}'.format(l2.info['id'], l2.port),
"amount": 50000},
{"id": '{}@localhost:{}'.format(l3.info['id'], l3.port),
"amount": 50000},
{"id": '{}@localhost:{}'.format(l4.info['id'], l4.port),
"amount": 50000}]
for i, d in enumerate(disconnects):
# Should succeed due to best-effort flag.
> l1.rpc.multifundchannel(destinations, minchannels=2)
tests/test_connection.py:2070:
...
> raise RpcError(method, payload, resp['error'])
E pyln.client.lightning.RpcError: RPC call failed: method: multifundchannel, payload: {'destinations': [{'id': '022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59@localhost:41023', 'amount': 50000}, {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d@localhost:41977', 'amount': 50000}, {'id': '0382ce59ebf18be7d84677c2e35f23294b9992ceca95491fcf8a56c6cb2d9de199@localhost:34943', 'amount': 50000}], 'minchannels': 2}, error: {'code': 305, 'message': 'Peer not connected at start', 'data': {'id': '0382ce59ebf18be7d84677c2e35f23294b9992ceca95491fcf8a56c6cb2d9de199', 'method': 'fundchannel_start'}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes#5271
In-Collaboration-With: Base58 'n Coding Seminar Participants
Changelog-Changed: `fundchannel` now errors if you try to buy a liquidity ad but dont' have `experimental-dual-fund` enabled
This will eventually enable us to specify 0 for zeroconf channels.
Changelog-Added: JSON-RPC: Added `mindepth` argument to specify the number of confirmations we require for `fundchannel` and `multifundchannel`
Things allocated by libwally all get the tal_name "wally_tal",
which cost me a few hours trying to find a leak.
In the case where we're making one of the allocations the parent
of the others (e.g. a wally_psbt), we can do better: supply a name
for the tal_wally_end().
So I add a new tal_wally_end_onto() which does the standard
tal_steal() trick, and also changes the (typechecked!) name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to parse the feerate string, so we can figure out what our
weight fee will be for a leased channel, so we go get the feerate
and use that to calculate what our expected lease fee will be for
the requested amount.
We need to know what the lease we're expecting is. To do this
we pass around the hex encoded portion of the wire format.
We can use this passed in expected lease rates to confirm that the peer
is, in fact, using the same rates as what we have currently.
Changelog-Added: JSON-RPC: fundchannel, multifundchannel, and openchannel_init now accept a 'compact_lease' for any requested funds
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `fundchannel` and `multifundchannel` will now reserve funding they use for 2 weeks instead of 12 hours.
It's unlikely but possible that a race condition will result in us not
being at the 'secured' state yet here.
Crashlogs. All required msgs are received (in order)
from peers, but the crash suggests they weren't relayed/processed by the
spender plugin in the order received.
WIRE_TX_SIGNATURES is passed the the plugin via a notification;
WIRE_COMMITMENT_SIGNED is returned as the result of an RPC call.
```
021-03-25T12:12:33.5213247Z lightningd-1: 2021-03-25T11:50:13.351Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-dualopend-chan#3: peer_in WIRE_COMMITMENT_SIGNED
2021-03-25T12:12:33.5221140Z lightningd-1: 2021-03-25T11:50:13.659Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-dualopend-chan#1: peer_in WIRE_COMMITMENT_SIGNED
2021-03-25T12:12:33.5228462Z lightningd-1: 2021-03-25T11:50:14.169Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-dualopend-chan#3: peer_in WIRE_TX_SIGNATURES
2021-03-25T12:12:33.5230957Z lightningd-1: 2021-03-25T11:50:14.375Z DEBUG plugin-spenderp: mfc 275, dest 1: openchannel_update 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d returned.
2021-03-25T12:12:33.5233307Z lightningd-1: 2021-03-25T11:50:14.539Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-dualopend-chan#1: peer_in WIRE_TX_SIGNATURES
2021-03-25T12:12:33.5235120Z lightningd-1: 2021-03-25T11:50:17.240Z INFO plugin-spenderp: Killing plugin: exited during normal operation
2021-03-25T12:12:33.5236707Z lightningd-1: 2021-03-25T11:50:17.260Z **BROKEN** plugin-spenderp: Plugin marked as important, shutting down lightningd!
```
Fixes#4455
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
And update all the in-tree callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `fundchannel_complete` `txid` and `txout` parameters (use `psbt`)
Previously this ported errors around as JSON. A nicer thing to do is to
deconstruct/reconstruct it; this also allows us to create our own errors
from within the multifundchannel family.
There's a version of this that keeps the PSBT in memory and does some
fancy addition/subtraction of unuseable parts for the v2's, however
it's much easier and simpler to simply error on the peer and re-start
from the very beginning.
This only works if we haven't gotten commitments from the peer yet (in
fact either method would only work if we haven't got commitments from
the peer yet), so if we've got commitments from them we simply mark them
as failed an go again.
In a perfect world, we'd remember what inputs we used last time, and
reuse those again on the re-attempt, which would pefectly guarantee both
that the failed opens (ones w/ commitments exchanged) would be canceled
after this completes (and we could re-try the failed again).
As it is, this is not perfect. It is, however, servicable.
We consolidate to the latest/singular RFC patch for dual-funding, so
there's just a single patchfile for the change. Plus we move back to the
opener setting the desired feerate, the accepter merely declines to
participate if they disagree with the set rate.
We should actually be including this (as it may define _GNU_SOURCE
etc) before any system headers. But where we include <assert.h> we
often didn't, because check-includes would complain that the headers
included it too.
Weaken that check, and include config.h in C files before assert.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we round down in `amount_tx_fee`, find the change fee as the
difference between what we've already paid and what the combined/total
fee would be if the change weight were also added.
We'll use it for figuring out whether or not to set a utxo witness
minimum, which comes much before we were setting this field.
Now we set the protocol as soon as we can reasonably deduce it.
we only want to sign the inputs that we've reserved via utxopsbt or
fundpsbt. we mark them with a flag (reusing the now defunct max-len
flag is fine), then look for inputs with that flag to pass to signonly
We only have output scripts for v1 protocols after the
fundchannel_start/openchannel_init round. We need to add them before
we get into the openchannel_update rounds, however, so we do that here.
niftynei
Rusty Russell
Christian Decker