Using `listfowards` for this wrong; expose this directly if people
care (and unlike listforwards, which could be deleted, we have to
remember these while the channel is still open!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listhtlcs` new command to list all known HTLCS.
And document that we never know payment_hash.
Changelog-Added: JSON-RPC: `listforwards` now shows `in_htlc_id` and `out_htlc_id`
Changelog-Changed: JSON-RPC: `listforwards` now never shows `payment_hash`; use `listhtlcs`.
The old `experimental-accept-extra-tlv-types` is now `accept-htlc-tlv-types`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `accept-htlc-tlv-types` lets us accept unknown even HTLC TLV fields we would normally reject on parsing (was EXPERIMENTAL-only `experimental-accept-extra-tlv-types`).
Technically this is a non-conformance with the spec, hence the `dev`
flag to opt-in, however I'm being told that it is also implemented in
other implementations. I'll follow this up with a proposal to the spec
to remove the checks we now bypass.
Changelog-Added: JSON-RPC: `fundchannel`, `multifundchannel` and `fundchannel_start` now accept a `reserve` parameter to indicate the absolute reserve to impose on the peer.
This is a good sanity check that users understand that if they upgrade
to master mid-cycle they can't go back!
Suggested-by: @wtogami
Changelog-Added: Config: `--database-upgrade=true` required if a non-release version wants to (irrevocably!) upgrade the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids having to escape | or &, though we still allow that for
the deprecation period.
To detect deprecated usage, we insist that alternatives are *always*
an array (which could be loosened later), but that also means that
restrictions must *always* be an array for now.
Before:
```
# invoice, description either A or B
lightning-cli commando-rune '["method=invoice","pnamedescription=A|pnamedescription=B"]'
# invoice, description literally 'A|B'
lightning-cli commando-rune '["method=invoice","pnamedescription=A\\|B"]'
```
After:
```
# invoice, description either A or B
lightning-cli commando-rune '[["method=invoice"],["pnamedescription=A", "pnamedescription=B"]]'
# invoice, description literally 'A|B'
lightning-cli commando-rune '[["method=invoice"],["pnamedescription=A|B"]]'
```
Changelog-Deprecated: JSON-RPC: `commando-rune` restrictions is always an array, each element an array of alternatives. Replaces a string with `|`-separators, so no escaping necessary except for `\\`.
Track rebalances, and report income events for them.
Previously `listincome` would report:
- invoice event, debit, outgoing channel
- invoice_fee event, debit, outgoing channel
- invoice event, credit, inbound channel
Now reports:
- rebalance_fee, debit, outgoing channel
(same value as invoice_fee above)
Note: only applies on channel events; if a rebalance falls to chain
we'll use the older style of accounting.
Changelog-None
First, how we record "our_funds" and then apply pushes vs lease_fees
(for liquidity ad buys/sales) was exactly opposite.
For pushes we were reporting the total funded into the channel, with the
push representing how much we'd later moved to the peer.
For lease_fees we were rerporting the total in the channel, with the
push representing how much was already moved to the peer.
We fix this (from a view perspective) by re-adding lease fees to what's
reported in the channel funding totals. Since this is now new behavior
(for leased channel values), we added new fields so we can take the old
field names thru a deprecation cycle.
We also make it possible to differentiate btw a push and a lease_fee
(before they were all the same), by adding to new fields to `listpeers`:
`fee_paid_msat` and `fee_rcvd_msat`.
This allows us to avoid math in the bookkeeper, instead we just pick
the numbers out directly and record them.
Fixes#5472
Changelog-Added: JSON-RPC: `listpeers` now has a few new fields for `funding` (`remote_funds_msat`, `local_funds_msat`, `fee_paid_msat`, `fee_rcvd_msat`).
Changelog-Deprecated: JSON-RPC: `listpeers`.`funded` fields `local_msat` and `remote_msat` are now deprecated.
`lightningd` has an option --wallet that lets you supply a database dsn
string to connect to a sqlite3/postgres database that's hosted/stored
elsewhere.
This adds the `--bookkeeper-db` option which does the same, except for
the bookkeeping data for a node!
Note that the default is to go in the `lightning-dir` in a database
called `accounts.sqlite3`
Adds schema definitions and manpages for bkpr- commands; also renames
the commands to all start with 'bkpr-', so they're easier to identify/
make runes about.
If rune contains invalid UTF-8, offers (which implements decode) would
produce JSON with invalid UTF-8, which causes lightningd to complain
and kill it, and then die because it's an important plugin.
So don't decode invalid UTF-8!
Reported-by: @jb55
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit weird since it lives in the offers plugin, but it works
well. This should make runes much more approachable for people!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was introduced to allow creating a shared secret, but it's better to use
makesecret which creates unique secrets. getsharedsecret being a generic ECDH
function allows the caller to initiate conversations as if it was us; this
is generally OK, since we don't allow untrusted API access, but the commando
plugin had to blacklist this for read-only runes explicitly.
Since @ZmnSCPxj never ended up using this after introducing it, simply
remove it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSONRPC: `getsharedsecret` API: use `makesecret`
There's one case where we can present more infomation, so do that, and
fix documentation.
Changelog-Added: JSON-RPC: `listforwards` now shows `out_channel` in more cases: even if it couldn't actually send to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5329
This will eventually enable us to specify 0 for zeroconf channels.
Changelog-Added: JSON-RPC: Added `mindepth` argument to specify the number of confirmations we require for `fundchannel` and `multifundchannel`
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
This prepares for when they start being u64, not strings with msat appended.
This has a strange side effect on our schema: despite the name,
decodepay's `fee_base_msat` is actually a u64, which we now convert to
msat on decode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
When building reproducible build for Bionic:
```
Traceback (most recent call last):
File "/usr/local/bin/mrkd", line 8, in <module>
sys.exit(main())
File "/usr/local/lib/python3.6/dist-packages/mrkd/__init__.py", line 261, in main
result = mistune.markdown(fp.read(), inline=inline, renderer=renderer)
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1856: ordinal not in range(128)
doc/Makefile:120: recipe for target 'doc/lightning-getinfo.7' failed
make: *** [doc/lightning-getinfo.7] Error 1
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has `description` parameter, will be required if bolt11 only has a hash.
Changelog-Deprecated: JSON-RPC: `pay` for a bolt11 which uses a `description_hash`, without setting `description`.
This is what LND does, and it's better for upper layers than trying to
twist our maxfeepercent / exemptfee heuristics to suit.
(I don't remember who complained about this, sorry!)
I'm doing this now because I want to add YA parameter next!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has new parameter `maxfee` for setting absolute fee (instead of using `maxfeepercent` and/or `exemptfee`)
Types are fixed, in particular:
* rename "OutputDesc" to more consistent "outputdesc".
* rename "utxo" to more consistent "outpoint".
* it's "boolean" not "bool".
* "number" means int or float, usually it should be u32.
Specific commands:
* close `id` can be by channel id, scid.
* close `feerange` is a feerate type.
* datastore/deldatastore/listdatastore `key` can be singleton.
* delexpiredinvoice: `maxexpirytime` is not required, is a u64.
* invoice/delinvoice/listinvoice `label` can be an integer
* fundpsbt: many fields are u32 not number (JSON for int or float).
* invoice: `msatoshi` can be "any".
* invoice: `expiry` has a type (now must be numeric).
* invoice: `exposeprivatechannels` can be bool or array of scids.
* invoice: `deschashonly` added
* keysend: there's no "float" type, use "number" or "u32" etc.
* keysend: `routehints` is a valid arg, as is `extratlvs` (EXPERIMENTAL_FEATURES)
* listdatastore: `key` is not required.
* newaddr: `addresstype` can be "all"
* pay: `exemptfee` is "msat", new fields `locaofferid` and `exclude`
* sendonion: was mis-formatted, missed `localofferid` and `groupid` fields.
* sendpay: add `localofferid` and `groupid` params.
* signpsbt: add `signonly` param.
* txprepare "outptus" typo.
* waitsendpay: add `groupid` and fix `partid` type.
* withdraw: `destination` is a bitcoin address, not a pubkey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
Based on setchannelfee, but expanded to allow setting max htlc amount (and others
in future?).
The main differences:
1. It doesn't change values which are not specified (that would be hard to
add fields to!)
2. It says exactly what all values are in any potentially changed channels.
Changelog-Added: JSON-RPC: new `setchannel` command generalizes `setchannelfee`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for accounting for missed/historical channel opens, to figure out
what the actual sat contribution from each peer is at a utxo level
Changelog-Added: JSONRPC: `listpeers` now includes a `pushed_msat` value. For leased channels, is the total lease_fee.
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This include the following commits:
- review 1/2: move from tab to space, and remove the exp. prop from doc;
- review 2/2: remove experimental features;
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
We keep the now-removed chains field, and in deprecated mode, we set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `chains` in invoice_request and invoice is deprecated, `chain` is used instead.
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Shows the dangers of "additionalProperties": true. We didn't have an else
clause, so our incorrect (and, with DF, incomplete!) schema was accepted.
I despair of getting anyone else to write a decent schema with these
semantics :(
Changelog-Fixed: doc: listnodes fields now correctly documented.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After some discussion with @shesek, and my own usage, we agreed that
a more comprehensive interface, which explicitly supports grouping,
is desirable.
Thus keys are now arrays, with the semantic that a key is either a
parent or has a value, never both.
For convenience in the JSON schema, we always return them as arrays,
though we accept simple strings as arguments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We add a generation counter, and allow update or del conditional
on a given generation.
Formalizes error codes, too, since we have more now.
Suggested-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out we didn't actually test this at all, and next commit does :(
offer_status_in_db: 4 is invalid
lightningd: FATAL SIGNAL 6 (version v0.10.0-459-g48fbd45-modded)
0x5608cd360855 send_backtrace
common/daemon.c:39
0x5608cd3608ff crashdump
common/daemon.c:52
0x7f9af1dae20f ???
???:0
0x7f9af1dae18b ???
???:0
0x7f9af1d8d858 ???
???:0
0x5608cd30a47e fatal
lightningd/log.c:819
0x5608cd3430c5 offer_status_in_db
wallet/wallet.h:1424
0x5608cd34f1f3 wallet_offer_disable
wallet/wallet.c:4494
0x5608cd33ae2e json_disableoffer
lightningd/offer.c:256
0x5608cd3038fc command_exec
lightningd/jsonrpc.c:643
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@shesek points out that we called this field created_at in bolt11 decode,
which makes more sense anyway.
Changelog-EXPERIMENTAL: bolt12 decode `timestamp` field deprecated in favor of new name `created_at`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Documentation for the funderupdate command on the funder plugin.
Realized we were missing the "leases_only" in the output; also adds
'_msat' to msat denominated outputs so they're parsed correctly by our
python bindings (also matches our naming conventions)
Changelog-EXPERIMENTAL: funder: `funderupdate` command to view and update params for contributing our wallet funds to v2 channel openings. Provides params for enabling `option_will_fund`.
Useful for parsing a passed in feerate before calling lightningd with
it, e.g. when you need to know what the feerate is for a fundpsbt before
calling fundpsbt
Changelog-Added: JSON-RPC: new command `parsefeerate` which takes a feerate string and returns the calculated perkw/perkb
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This makes it easier to access (rather than decoding bolt11).
Changelog-Added: JSON-RPC: `invoice` now outputs explicit `payment_secret` it its own field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for regtest and testnet. Sure, you shouldn't use this on mainnet,
but I haven't restricted it because our users are usually pretty clever.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #1806
Changelog-Added: config: `force_feerates` option to allow overriding feerate estimates (mainly for regtest).
We don't do it for sendinvoice (yet?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` can take a payer note, and `listinvoice` will show the payer_notes received.
As per latest spec revision.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: BOLT12 offers can now be unsigned, for really short QR codes.
And add the local_offer_id to the schemas too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSONRPC: `listoffers` now shows `local_offer_id` when listing all offers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: doc: Epic documentation rewrite: each now lists complete and accurate JSON output, tested against testsuite.
If we have conditional fields, we often set `additionalProperties` `true`
at the top-level, but then we have to make sure to cover all the possible
combinations in conditionals, so unintended additions don't appear.
This revealed missing fields in delinvoice, for example.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds our first (basic) schema, and sews support into pyln-testing
so it will load schemas for any method for doc/schemas/{method}.schema.json.
All JSON responses in a test run are checked against the schema (if any).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Kristaps Kaupe
Christian Decker
greggzigler
niftynei
William Casarin
Vincenzo Palazzo
adi2011
Simon Vrouwe
Michael Schmoock
Sjors Provoost
Aaron Dewes
Tim W