We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
------------------------------- Valgrind errors --------------------------------
Valgrind error file: valgrind-errors.493330
==493330== Conditional jump or move depends on uninitialised value(s)
==493330== at 0x154051: opt_add_addr_withtype (options.c:275)
==493330== by 0x154406: opt_add_announce_addr (options.c:302)
==493330== by 0x2696E6: parse_one (parse.c:121)
==493330== by 0x25CFB5: opt_parse (opt.c:228)
==493330== by 0x155DB6: handle_opts (options.c:1413)
==493330== by 0x127317: main (lightningd.c:994)
==493330==
{
<insert_a_suppression_name_here>
Memcheck:Cond
fun:opt_add_addr_withtype
fun:opt_add_announce_addr
fun:parse_one
fun:opt_parse
fun:handle_opts
fun:main
}
--------------------------------------------------------------------------------
Leaving base_dir /tmp/ltests-iyf2dw3n intact, it still has test sub-directories with failure details: ['test_announce_dns_without_port_1']
====================================== short test summary info ======================================
ERROR tests/test_gossip.py::test_announce_dns_without_port - ValueError:
We were waiting too long for the reconnect to happen (60s default),
which caused this test to timeout.
When testing, let's speed up the reconnect.
L2 tried to reconnect but didn't have connection information in its
gossip -- is there a way to ask/save connection data from a node you're
making a channel with that doesn't rely on their node_announcement?
Most unexpected ones are still 1, but there are a few recognizable error codes
worth documenting.
Rename the HSM ones to put ERRCODE_ at the front, since we have non-HSM ones
too now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than a generic "add member", provide two routines: one which
doesn't quote, and one which does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Get it to log direct to stdout, so we see what's happening *as it
happens* rather than as we read it. We could restore the thread we
were using before, but that added more problems than it solved.
This means that we need the hsm password prompts in the log though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
This adds config and commandline options for htlc_min_msat, htlc_max_msat and
announce_discovered_ip. The default is 0msat for htlc_min_msat, unlimited for
htlc_max_msat and enabled for announce_discovered_ip.
The announce_discovered_ip gets the disable commandline switch --disable-ip-discovery
Changelog-added: Config options for htlc_min_msat, htlc_max_msat and announce_discovered_ip.
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Also has to fix up tests.
Changelog-Fixed: cli doesn't required anymore to confirm the password if the `hsm_secret` is already encrypted.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Fixed: check if the pass and the confirmation pass match from the command line
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Suggested-by: Rusty Russell
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Changed: Support hsm specific error error code in lightning-cli
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Incase the error handling happening after the quted line is non-critical:
```
return tal_fmt(NULL, "Unable to parse address '%s': %s", arg, err_msg);
```
we should not expand the proposed_listen_announce array without adding
a proposed_wireaddr. So we move the expand of proposed_listen_announce
to the location where we also expand the proposed_wireaddr.
Changelog-None
This loads up 20MB of plugins temporarily; we seem to be getting OOM
killed under CI and I wonder if this is contributing.
Doesn't significantly reduce runtime here, but I have lots of memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This surprised me, since the CHANGELOG for [0.8.2] said:
We now announce multiple addresses of the same type, if given. ([3609](https://github.com/ElementsProject/lightning/pull/3609))
But it lied!
Changelog-Fixed: We really do allow providing multiple addresses of the same type.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
October was the date Torv2 is no longer supported by the Tor Project;
it will probably not work at all by next release, so we should remove
it now even though it's not quite the 6 months we prefer for
deprecation cycles.
I still see 110 nodes advertizing Torv2 (vs 10,292 Torv3); we still
parse and display it, we just don't advertize or connect to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
Incoming HTLCs are rejected by the HTLC logic if the payload contains
an even type that `lightningd` doesn't recognize. This is to prevent
us from accidentally accepting a payment that has extra semantics
attached (for example if we get a keysend payment and don't know what
to do with the TLV field containing the message we should reject it,
otherwise the overall semantics of the message delivery fail).
Useful for regtest and testnet. Sure, you shouldn't use this on mainnet,
but I haven't restricted it because our users are usually pretty clever.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #1806
Changelog-Added: config: `force_feerates` option to allow overriding feerate estimates (mainly for regtest).
Incoming HTLCs are rejected by the HTLC logic if the payload contains
an even type that `lightningd` doesn't recognize. This is to prevent
us from accidentally accepting a payment that has extra semantics
attached (for example if we get a keysend payment and don't know what
to do with the TLV field containing the message we should reject it,
otherwise the overall semantics of the message delivery fail).
Rusty Russell
niftynei
Michael Schmoock
Simon Vrouwe
pn
Vincenzo Palazzo
Christian Decker