Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
If you get the wrong hsm_secret, your node_id will change, and
peers won't know who you are, bitcoind will reject your transaction
signatures, and other madness.
Catch this as soon as it happens, by storing our node_id in the db.
Suggested-by: @cdecker, @fiatjaf
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Config: `lightningd` will refuse to start with the wrong node_id (i.e. hsm_secret changes).
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Connectd already does this when we *receive* an error or warning, but
now do it on send. This causes some slight behavior change: we don't
disconnect when we close a channel, for example (our behaviour here
has been inconsistent across versions, depending on the code).
When connectd is told to disconnect, it now does so immediately, and
doesn't wait for subds to drain etc. That simplifies the manual
disconnect case, which now cleans up as it would from any other
disconnection when connectd says it's disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to detect when lightningd hasn't seen our latest
disconnect/reconnect; in particular, we would hit the following pattern:
1. lightningd says to connect a subd.
2. connectd disconnects and reconnects.
3. connectd reads message, connects subd.
4. lightningd reads disconnect and reconnect, sends msg to connect to subd again.
5. connectd asserts because subd is alreacy connected.
This way connectd can tell if lightningd is talking about the previous
connection, and ignoere it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch:
1. connectd says it's connected (peer_connected)
2. we tell connectd we want to talk about each channel (peer_make_active)
3. connectd gives us an fd for each channel, and we connect it to a subd (peer_active)
4. OR, connectd says it sent something about a channel we didn't tell it about, with an fd (peer_active)
Now:
1. connectd says it's connected (peer_connected)
2. we start all appropriate subds and tell connectd to what channels/fds (peer_connect_subd).
3. if connectd says it sent something about a channel we didn't tell it about, we either tell
it to hang up (peer_final_msg), or connect a new opening daemon (peer_connect_subd).
This is the minimal-size patch, which is why we create socket pairs in
so many places to use the existing functions. Many cleanups are
possible, since the new flow is so simple.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than a generic "add member", provide two routines: one which
doesn't quote, and one which does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That's useful for "tell me everything about this node" debugging.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5348
Changelog-Added: lightningd: `log-level=debug:<partial-nodeid>` supported to get debug-level logs for everything about a peer.
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Activate means a specific thing now (connectd said something), so avoid
confusing it with this function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Instead of doing this weird chaining, just call them all at once and
use a reference counter.
To make it simpler, we return the subd_req so we can hang a destructor
off it which decrements after the request is complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is no "wallet_lib_headers" variable in wallet/Makefile
Likewise, there were two "lightningd_headers", a couple of unused
variables and some other nonsene in lightningd/Makefile
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
We want to stream gossip through this, but currently connectd treats the
fd as synchronous. While we work on getting rid of that, it's easiest to
have two fds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's weird to have connectd ask gossipd, when lightningd can just do it
and hand all the addresses together.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd is going to end up using this do demux; make it fast and complete.
Fixing this reveals a problem in openingd: it now extracts the channel_id
from funding_signed (which is where we transition off the temporary), and
gets upset. So fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
adi2011
Christian Decker
Jon Griffiths
Ken Sedgwick
Michael Schmoock
niftynei
Simon Vrouwe