The commitment tx uses the same feerate as the HTLC txs (which we have
to grind to find), but we can't use it directly since the fee could be
increased by the presence of dust HTLCs. We can still use it to cap
the maximum though.
Time before: 1m6.984s
Time after: 0m15.794s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: onchaind is much faster when unilaterally closing old channels.
We try signatures to see which HTLC (we can have many) is the right one;
we can trivially match htlcs against commitment tx outputs, but the CTLV
can vary, and that's inside the htlc tx itself.
By sorting them, it's easy to skip comparing duplicates:
Time before: 2m32.547s
Time after: 1m6.984s
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this made valgrind OOM, and chewed much CPU. I dumped the
input and output into a file to allow easy replay.
This will break as soon as we change onchaind's wire format, but it will
serve its purpose until then!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is vital for calculating merkle trees; I previously used
towire+fromwire to get this!
Requires generation change so we can magic the ARRAY_SIZE var (the C
pre-processor can't uppercase things).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a few structs/wire calls that only exist under experimental features.
These were in a common file that was shared/used a bunch of places but
this causes problems. Here we move one of the problematic methods back
into `openingd`, as it's only used locally and then isolate the
references to the `witness_stack` in a new `common/psbt_internal` file.
This lets us remove the iff EXP_FEATURES inclusion switches in most of
the Makefiles.
1. Rename memleak_enter_allocations to memleak_find_allocations.
2. Unify scanning for pointers into memleak_remove_region / memleak_remove_pointer.
3. Document the functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dual funding needs the max-witness-len and utxo fields set for every
input. we should add them when we create a 'fundpsbt', so that every
psbt that c-lightning generates is dual-funding ready
There's a lot of it, and it means we can't `make check-source` on
these files.
Also bring bolt quotes up-to-date.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #3832
Changelog-Changed: onchaind: We now scorch the earth on theft attempts, RBFing up our penalty transaction as blocks arrive without a penalty transaction getting confirmed.
We're going to make experimental versions of these completely separate files.
Also remove the dependency on the Makefile itself: it simply causes
unnecessary churn. We can always force-rebuild when we change a rule.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best done by passing `struct bitcoin_signature` around instead
of raw signatures. We still save raw sigs to the db, and of course the
wire protocol uses them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
HTLC fees increase (larger weight), and the fee paid by the opener
has to include the anchor outputs (i.e. 660 sats).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The main change here is that the previously-optional open/accept
fields and reestablish fields are now compulsory (everyone was
including them anyway). In fact, the open/accept is a TLV
because it was actually the same format.
For more details, see lightning-rfc/f068dd0d8dfa5ae75feedd99f269e23be4777381
Changelog-Removed: protocol: support for optioned form of reestablish messages now compulsory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the `bitcoin_tx_add_input` interface to accept a witness script
and or scriptPubkey.
We save the amount + witness script + witness program (if known) to
the PSBT object for a transaction when creating an input.
For the moment it's a complete tx, but in future designs we might only
be given the specific input which closes the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise this creates noise for the next patch which switches the initial
`struct bitcoin_tx` into a `struct tx_parts`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It returns NULL, so you can simply `return fromwire_fail(...)`
if you want to return NULL in this case. Use that more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
We did this originally because these types are referred to in the bolts, and we
had no way of injecting the correct include lines into those. Now we do, so
there's less excuse for this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's possible for our peer to publish a commitment tx that has already
updated our balance for an htlc before we've completed removing it from
our commitment tx (aka before we've updated our balance). This used to
crash, now we just update our balance (and the channel balance logs!)
and keep going.
If they've removed anything from our balance, we'll end up counting it
as chain_fees below. Not ideal but fine... probably.
Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
We record htlcs when they're fulfilled as 'withdrawals' that are
onchain. This should make use of the payment_hash that we stashed.
Additionally, if an htlc spend comes through that's not ours, it's
probably them resolving our attempted cheat; we should allow it to
proceed without bombing, and just do our accounting as necessary. It'll
all come out in the wash.
For cheats, we do a little bit of weird accounting. First we 'update'
our on-ledger balance to be the entirety of the channel's balance. Then,
as outputs get resolved, we record the fees and outputs as withdrawals
from this amount.
It's possible that they might successfully 'cheat', in which case we
record those as 'penalty' but debits (not credits).
Ignored outputs don't end up in the same 'resolved' pathway as other
tracked outputs do, so we mark them as moved when proposed/broadcast
instead of when resolved (since they'll never flow through as resolved)
I noticed the following in logs for tests/test_connection.py::test_feerate_stress:
```
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Failing HTLC 18446744073709551615 due to peer death
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: local_routing_failure: 8194 (WIRE_TEMPORARY_NODE_FAILURE)
```
This is because it reports the (transient) node_failure error, because
our channel_failure message is incomplete. Fix this wart up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
This allows us to set more fine-grained feerate for onchain resolution.
We still give it the same feerate for all types, but this will change as
we move feerates to bcli.
This sets the nLockTime to the tip (and accordingly each input's nSequence to
0xfffffffe) for withdrawal transactions.
Even if the anti fee-sniping argument might not be valid until some time yet,
this makes our regular wallet transactions far less distinguishable from
bitcoind's ones since it now defaults to using native Segwit transactions
(like us). Moreover other wallets are likely to implement this (if they
haven't already).
Changelog-Added: wallet: withdrawal transactions now sets nlocktime to the current tip.
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is ignored in subdaemons which are per-peer, but very useful for
multi-peer daemons like connectd and gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
We used to match specifically on `is_elements && coinbase`, but we can just
hand off responsibility to libwally and then make sure we handle it correctly.
Turns out that if we have the init message contain both the chainparams as
well as a transaction that needs to be parsed we need to set the parser to
elements mode before we reach the transaction...
This is the main reason we started weaving the chainparams everywhere: being
able to compare the asset type with the fee paying asset tag, thus determining
the value of the asset correctly (we still treat any non-fee-paying assets as
having value 0).
Signed-off-by: Christian Decker <decker.christian@gmail.com>
531c8d7d9b
In this one, we always send my_current_per_commitment_point, though it's
ignored. And we have our official feature numbers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The largest change is inside hsmd: it hands a null per-commitment key
to the wallet to tell it to spend the to_remote output.
It can also now resolve unknown commitments, even if it doesn't have a
possible_remote_per_commitment_point from the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
niftynei
Matt Whitlock
ZmnSCPxj jxPCSnmZ
darosior
Christian Decker