We set the timeout on first HTLC, but didn't clear it if that HTLC failed.
It's saner to have a per-HTLC timeout (since that's what it is!) and
also our timer infra is specially coded to scale approximately infinitely so
trying to optimize this is vastly premature.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We would sometimes gratuitously disconnect 30 seconds after an HTLC failed.
If l2 didn't get FUNDING_LOCKED from l1 before it disconnected, it
won't be in state CHANNELD_NORMAL: it will be in DUALOPEND_AWAITING_LOCKIN.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This would flake fairly regularly, what we really care about is
asserting that the l2 node is in CHANNELD_NORMAL state, while the l1
node hasn't progressed that far yet.
Trying to put all the disconnect logic into the same path was a dumb
idea. If you asked to reconnect but passed in an 'unsaved' channel, we
would not call the 'reconnect' code.
Instead, we make a differentiation between "unsaved" channels
(ones that we haven't received commitment tx for) and handle the
disconnect for these separate from where we want to do a reconnect.
Tests that will only run when !EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v1')
def test_...()
Tests that will only run when EXPERIMENTAL_DUAL_FUND:
@pytest.marker.openchannel('v2')
def test_...()
Users are more upset recently with the cost of unilateral closes
than they are the risk of being cheated. While we complete our
anchor implementation so we can use low fees there, let's
get less aggressive (we already have 34 or 18 blocks to close
in the worst case).
The changes are:
- Commit transactions were "2 CONSERVATIVE" now "6 ECONOMICAL".
- HTLC resolution txs were "3 CONSERVATIVE" now "6 ECONOMICAL".
- Penalty txs were "3 CONSERVATIVE" now "12 ECONOMICAL".
- Normal txs were "4 ECONOMICAL" now "12 ECONOMICAL".
There can be no perfect levels, but we have had understandable
complaints recently about how high our default fee levels are.
Changelog-Changed: Protocol: channel feerates reduced to bitcoind's "6 block ECONOMICAL" rate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4494
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: config: New option `log-timestamps` allow disabling of timestamp prefix in logs.
Since plugins will start sending them soon, and they are likely to get
it wrong sometimes, be a bit more lenient, warn them in the logs
instead and then make sure it doesn't accidentally work anyway.
We will eventually start emitting and dispatching custom notifications
from plugins just like we dispatch internal notifications. In order to
get reasonable error messages we need to make sure that the topics
plugins are asking for were correctly registered. When doing this we
don't really care about whether the plugin that registered the
notification is still alive or not (it might have died, but
subscribers should stay up and running), so we keep a list of all
topics attached to the `struct plugins` which gathers global plugin
information.
Behold! An immaculately concepted plugin for configuring your node to do
amazing things*
*fund channel open requests
Changelog-Added: Plugins: Add `funder` plugin, which allows you to setup a policy for funding v2 channel open requests. Requres --experimental-dual-fund option
We don't always get two transactions on line 1019; the comment is
confused (only one penalty tx successfully comes out of l3). So make
sure we get the other transactions when we expect them, and then
make this test more specific.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You still shouldn't do this (you could get some transient failures),
but at least you have a decent chance if you reinstall over a running
daemon, instead of getting confusing internal errors if message
formats have changed.
Changelog-Added: lightningd: we now try to restart if subdaemons are upgraded underneath us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4346
We didn't wait for the sendtx to complete before shutting down,
and hence timed out:
```
l2.daemon.wait_for_log('Broadcasting funding tx')
l1.stop()
l2.stop()
bitcoind.generate_block(6)
l1.restart()
l2.restart()
# Make sure we're ok.
> l2.daemon.wait_for_log(r'to CHANNELD_NORMAL')
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Channel can be inactive before it disconnects, apparently. Check
explicitly for the disconnected state so we get the expected error.
Here's what happened:
```
# Can't pay while its offline.
with pytest.raises(RpcError, match=r'failed: WIRE_TEMPORARY_CHANNEL_FAILURE \(First peer not ready\)'):
> l1.rpc.sendpay(route, rhash)
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
```
And the logs show that the outgoing HTLC was sent to channeld before it
realized the connection was closed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Change the address in the canned db: it seems we won the lottery and
l1 connected, and got an error!
```
E ValueError:
E Node errors:
E - lightningd-1: had warning messages
E Global errors:
...
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_CHANNEL_REESTABLISH
lightningd-1: 2021-04-07T02:44:53.579Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_GOSSIP_TIMESTAMP_FILTER
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_in WIRE_ERROR
lightningd-1: 2021-04-07T02:44:53.580Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: error channel fdeb1ea12e02aa043f66ba581e969a1882d21142b19429995c6733bb71070bb6: Multiple channels unsupported
lightningd-1: 2021-04-07T02:44:53.580Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Will try reconnect in 60 seconds
```
So I changed the port in the db to "1" which will never succeed:
```
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:38723');
COMMIT;
sqlite> UPDATE peers SET address="127.0.0.1:1"
...> ;
sqlite> .dump peers
PRAGMA foreign_keys=OFF;
BEGIN TRANSACTION;
CREATE TABLE peers ( id INTEGER, node_id BLOB UNIQUE, address TEXT, PRIMARY KEY (id));
INSERT INTO peers VALUES(1,X'022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59','127.0.0.1:1');
COMMIT;
sqlite>
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
This was flaky because sometimes we'd generate blocks before the funding
transaction reached the mempool.
If we wait until it's in, it works as expected.
[ Neatened to use wait_for_mempool arg --RR ]
We updated the "UNKNOWN TYPE channel_id" -> the actual channel id;
the reason for why the error fails shouldn't be restrictive (we just
know that it fails)
There is little point in faking a self-payment, but we should also not
crash :-)
Fixes#4438
Changelog-Fixed: keysend: Keysend returns an error when a self-payment is requested
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
And update all the in-tree callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `fundchannel_complete` `txid` and `txout` parameters (use `psbt`)
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a version of this that keeps the PSBT in memory and does some
fancy addition/subtraction of unuseable parts for the v2's, however
it's much easier and simpler to simply error on the peer and re-start
from the very beginning.
This only works if we haven't gotten commitments from the peer yet (in
fact either method would only work if we haven't got commitments from
the peer yet), so if we've got commitments from them we simply mark them
as failed an go again.
In a perfect world, we'd remember what inputs we used last time, and
reuse those again on the re-attempt, which would pefectly guarantee both
that the failed opens (ones w/ commitments exchanged) would be canceled
after this completes (and we could re-try the failed again).
As it is, this is not perfect. It is, however, servicable.
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
We were not aborting if we had routehints, even though all routehints
may have been filtered out.
Changelog-Fixed: pay: `pay` will now abort early if the destination is not reachable directly nor via routehints.
We would happily spin on attempts that are doomed to fail because we
don't know the entrypoint. Next up: remove routehints whose
entrypoints are known but unreachable.
We consolidate to the latest/singular RFC patch for dual-funding, so
there's just a single patchfile for the change. Plus we move back to the
opener setting the desired feerate, the accepter merely declines to
participate if they disagree with the set rate.
Looks like #4394 treated a symptom but not the root cause. We were
actually sending the message framed with the WIRE_CUSTOMMSG_OUT and
the length prefix over the encrypted connection to the peer. It just
happened to be a valid custommsg...
This fixes the issue, and this time I made sure we actually send the
raw message over the wire. However for backward compatibility we
needed to imitate the faulty behavior which is 90% of this patch :-)
Changelog-Fixed: plugin: `dev-sendcustommsg` included the type and length prefix when sending a message.
Users have no idea what they would pay for unilateral closes.
At least this gives them a clue!
Reported-by: @az0re on IRC.
Changelog-Added: JSON-RPC: `listpeers` now shows latest feerate and unilaral close fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec doesn't say to do this, but it makes sense, otherwise
they'll never be able to mutually close the channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were always prefixing the `message` field with the internal type
prefix 0x0407, followed by the length prefix. Neither is needed since
the type being constant is of no interest to the plugin and the length
being implicit due to the JSON-encoding.
Reported-by: Ilya Evdokimov
Changelog-Fixed: plugin: The `custommsg` hook no longer includes the internal type prefix and length prefix in its `payload`
Changelog-Deprecated: plugin: The `message` field on the `custommsg` hook is deprecated in favor of the `payload` field, which skips the internal prefix.
They need to specify fees to get a channel before this, but it's possible.
The test revealed no surprises (other than the last change).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Saves a great deal of confusion for regtest users.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: If bitcoind won't give a fee estimate in regtest, use minimum.
This avoids spamming the logs. We also remove the duplicate debug
logs on self-disable (plugin_kill logs it for us).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a plugin died due to connection close, we'd always say
"Plugin exited before completing handshake.", which was often
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If not all nodes are up-to-date with the new blocks, they can reject
announcements:
```
lightningd-4: 2021-02-23T02:02:47.832Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Ignoring future channel_announcment for 124x1x0 (current block 123)
lightningd-4: 2021-02-23T02:02:47.848Z DEBUG lightningd: Adding block 133: 2d950451211398de9c10bf9df7eb53b385390eca31e306bc8fc1387b53d9f9a2
lightningd-4: 2021-02-23T02:02:47.865Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/0
lightningd-4: 2021-02-23T02:02:47.866Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 124x1x0/1
```
Technically, this change is not sufficient either, since *gossipd* might
not know about new block yet. But it makes this case less likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get a label clash: easy, just re-serve:
```
2021-02-18T04:29:37.474Z **BROKEN** plugin-offers: Failed invoice_request lnr1qgsqvgnwgcg35z6ee2h3yczraddm72xrfua9uve2rlrm9deu7xyfzrcyyqwtp0rmsgquvuacqcl5cdfzwzmu3v8tqgvpqs8e80dlmxm7ey4xwrqdsqqqqqqqqqqqqqqqq2pqqfqpqynzqzx9rylzy40ernj4jzc3p2dwy3n8x6lqeaywwk725ghx4kx63pcfxgg2z3nsn80jzge06nt3ks8pr6rvnujq48376lpmrr3cq04nurpy783eyr0awh5773lrlmjek07rjf0nx4g9235ulkcs7jp2h5gumjyquhadh846da3jptxm9g0qz5lne4hjhag for offer 1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67: Got JSON error: {\"code\":900,\"message\":\"Duplicate label\",\"data\":{\"label\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67-08c5193e2255f91ce5590b110a9ae2466736be0cf48e75bcaa22e6ad8da88709-1\",\"bolt12\":\"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\",\"payment_hash\":\"396250395aa046f4c58162a5ae31952d01bd0c8e5213f32e748ec428a9379cd2\",\"msatoshi\":7700446,\"amount_msat\":\"7700446msat\",\"status\":\"unpaid\",\"description\":\"Weekly coffee for rusty!\",\"expires_at\":1614832137,\"local_offer_id\":\"1cb0bc7b8201c673b8063f4c352270b7c8b0eb02181040f93bdbfd9b7ec92a67\"}}
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to only set it for single-use offers (where it's required),
but it's still interesting for multi-use offers, so let's keep it
there.
We also put this field in the documentation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Nested `with` exception checks don't work; fix flakes i'm seeing with
valgrind causing failures because blockchain not up to date when
`fundchannel` called.
We weren't waiting for the channel to get to normal state:
E pyln.client.lightning.RpcError: RPC call failed: method: pay, payload: {'bolt11': 'lnbcrt20m1pszfpezpp549um3vuyt52rgea32g7u55a5fv29yv7t94cmr2f0vjgcc33m3dvqdqzdgxqyjw5qcqp9sp59vu4tat2n53ylzrgxa95s5wu2s885a9llud64c0f6gjqts7h6tks9qy9qsq7u0j3w2h3sxxp9axpjxkz525znjn0t92gnrgk7y6plyq39zw9994g88xxjx52egk4965dp5qt2w08hk009eq9hm8nykwmxe7r705k8gpkqu9mw'}, error: {'code': 210, 'message': 'Ran out of routes to try after 1 attempt: see `paystatus`', 'attempts': [{'status': 'failed', 'failreason': 'Cannot attempt payment, we have no channel to which we can add an HTLC', 'partid': 1, 'amount': '2000000000msat'}]}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
LightningNode.join_nodes and LightningNode.openchannel internally
generate blocks, which causes nodes to be out of sync, and ignore
"future" announcements, because they haven't seen that block yet.
It was using a trick to only shut down the first node, and forgetting
about the others. This could lead to processes not being stopped
correctly and to test failures because the directory isn't cleaned up
correctly.
Now we use the executor to shut as many nodes as possible in parallel.
In the case where you want a PSBT and also want the output to be added
as a change address, use `excess_as_change` = true.
Generates a change address to use. If you want to pay the excess
elsewhere, you will have to add separately.
Changelog-Added: JSON-RPC: Add new parameter `excess_as_change` to fundpsbt+utxopsbt
Since we turned many errors into warnings, we want our tests to fail
when they happen unexpectedly. We make WARNING clear in the strings
we print, too, to help out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
And make all the callers choose which one. In general, I prefer warn,
which lets them reconnect and try again, however some places are either
stated that they must be errors in the spec itself, or in openingd
where we abandon the channel when we close the connection anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we now send warning messages and close the connection, except on unrecoverable errors.
We construct the route manually so we may not have the
channel_announcement yet. But we can get an update from the error
packet, which can lead to:
```
2021-01-29T01:38:23.4767334Z ValueError:
2021-01-29T01:38:23.4767987Z Node errors:
2021-01-29T01:38:23.4768767Z - lightningd-1: had bad gossip messages
2021-01-29T01:38:23.4769512Z Global errors:
2021-01-29T01:38:23.4770300Z
2021-01-29T01:38:23.4771109Z contrib/pyln-testing/pyln/testing/fixtures.py:197: ValueError
...
2021-01-29T01:38:23.7820197Z lightningd-1: 2021-01-29T01:26:57.460Z DEBUG gossipd: Extracted channel_update 01027217b3086ad9f3dee1fa55b94c5fd2a4b0637bec70ba727ba4151a8de5173ddc749db3502d41ab0ae164addc8fd013d2088b6a12a2f478ae0affa94d76d8845c06226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f000067000001000160136459010000060000000000000000000000010000000a000000003b023380 from onionreply 100d0000007500887217b3086ad9f3dee1fa55b94c5fd2a4b0637bec70ba727ba4151a8de5173ddc749db3502d41ab0ae164addc8fd013d2088b6a12a2f478ae0affa94d76d8845c06226e46111a0b59caaf126043eb5bbf28c34f3a5e332a1fc7b2b73cf188910f000067000001000160136459010000060000000000000000000000010000000a000000003b023380
2021-01-29T01:38:23.7837450Z lightningd-1: 2021-01-29T01:26:57.461Z DEBUG gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 103x1x1/0
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should actually be including this (as it may define _GNU_SOURCE
etc) before any system headers. But where we include <assert.h> we
often didn't, because check-includes would complain that the headers
included it too.
Weaken that check, and include config.h in C files before assert.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fix up the test by using pay, instead of sendpay (and making pay log
the expected message).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: sendpay no longer extracts updates from errors, the caller should do it from the `raw_message`.
Nit: The underscore in "openchannel_hook" is wrong, bcause the name of
the hook is just "openchannel". The "_hook" implied this to be part of
the name.
Changelog-None
The test was not considering that concurrent sendrawtx of the same tx
is not stable, and either endpoint will submit it first. Now just
checking state transitions and the mempool.
If we're quick (or the node is slow) we end up reconnecting before our
counterparty has realized the state transition, resulting in an
unexpected re-establish.
We were sometimes waiting only 5 seconds, which is way too short on a
heavily loaded machine such as CI. Making it 30 seconds and collecting
it in a single place so we can adjust more easily.
We also make the logic a bit nicer to read. The failure was due to
more than one status message being present if we look at the wrong
time:
```
arr = ['CLOSINGD_SIGEXCHANGE:We agreed on a closing fee of 20334 satoshi for tx:17f1e9d377840edf79d8b6f1ed0faba59bb307463461...9b98', 'CLOSINGD_SIGEXCHANGE:Waiting for another closing fee offer: ours was 20334 satoshi, theirs was 20332 satoshi,'] │
def only_one(arr):
"""Many JSON RPC calls return an array; often we only expect a single entry
"""
> assert len(arr) == 1
E AssertionError
```
We weren't waiting for the transactions to enter the mempool which
could cause all of our fine-tuned block counts to be off. Now just
waiting for the expected number of txs.
The fetchinvoice and offers plugins disable themselves if the option
isn't enabled (it's enabled by default on EXPERIMENTAL_FEATURES).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-offers` enables fetch, payment and creation of (early draft) offers.
By returning 'disable: <reason>' inside getmanifest or init result.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: plugins can now disable themselves by returning `disable`, even if marked important.
Note that this also changes so the feature is not represented in channels,
reflecting the recent drafts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-onion-messages` enables send, receive and relay of onion messages.
There's a case where a dropped funding_locked will result in the peer
moving onto channeld, while we stay in dualopend. As we haven't
received their funding_locked, we retransmit tx_sigs, which channeld
will need to handle.
With the patch the peer drops it on the floor; the peer will resend
funding_locked on reconnect, which will correctly advance us to
channeld and CHANNELD_NORMAL
As per lastest revision of the spec, we can specify amounts in invoice
requests even if the offer already specifies it, as long as we exceed
the amount given. This allows for tipping, and amount obfuscation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Means a reshuffle of our logic: we want to multiply by quantity before
conversion for maximum accuracy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids a footgun where they create an offer then we can't create
the invoice because they don't have a converter plugin.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We split `send_invoice` offers inoo offerout (for want of a better name).
This simplifies the API.
Also took the opportunity to move the `vendor` tag to immediately
follow `description` (our tests use arguments by keywords, so no
change there).
Suggested-by: shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
refund offers are implied send_invoice offers. And send_invoice offers
are implied single-use offers, though it can also make sense to have
a non-send_invoice offer be single-use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required if we want to create a "bouncer" plugin (in my copious free time!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now takes an optional `cltv` parameter.
Changelog-changed: lightningd: the `--encrypted-hsm` now asks you to confirm your password when first set
Changelog-changed: hsmtool: the `encrypt` now asks you to confirm your password
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
A fractional satoshi value isn't really useful; rounding up loses
precision but that's why you called "whole satoshi", wasn't it?
Changelog-Changed: pyln-client: Millisatoshi has new method, `to_whole_satoshi`; *rounds value up* to the nearest whole satoshi
We need to use it for the 'df_accepter' plugin, so we get the feerate
correct.
Changelog-Added: pyln-client: `fundpsbt`/`utxopsbt` now support `min_witness_weight` param
Fixes#4302
Changelog-fixed: hsmtool: the `generatehsm` command now generates an appropriately-sized hsm_secret
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
This slightly breaks the API, but still accept the input: we just don't
take it into account anymore.
For `dumponchaindescriptors`, we have to still take the old place of the
`network` parameter into account to not entirely break the API.
Changelog-Added: hsmtool: password must now be entered on stdin. Password passed on the command line are discarded.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
We were getting bad gossip because some nodes discarded the channel
announcement for being in the future. This is because the node was, at
that time, below the confirmation height. It'd then discard the
followup messages because not preceded by an announcement, and getting
upset about that.
Both my machine and apparently the CI tester machines regularly run
into issues with load on the system, causing timeouts (and
unresponsiveness). The throttler throttles the speed with which new
instances of c-lightning get started to avoid overloading. Since the
plugin used for parallelism when testing spawns multiple processes we
need to lock on the fs. Since we have that file open already, we'll
also write a couple of performance metics to it.
1. Hoist 7200 constant into the bolt12 heade2.
2. Make preimage the last createinvoice arg, so we could make it optional.
3. Check the validity of the preimage in createinvoice.
4. Always output used flag in listoffers.
5. Rename wallet offer iterators to offer_id iterators.
6. Fix paramter typos.
7. Rename `local_offer_id` parameter to `localofferid`.
8. Add reference constraints on local_offer_id db fields.
9. Remove cut/paste comment.
10. Clarify source of fatal() messages in wallet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"multi" means that specifying a parameter twice will append, not override.
Multi args are always given as a JSON array, even if only one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: new "multi" field allows an option to be specified multiple times.
This was fixed in 0.8.2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: plugins: options to init are no longer given as strings if they are bool or int types (deprecated in 0.8.2).
We were blindly initiating the keysend payment, which could lead to
confusing outcomes. This adds a very specific error message to the
error returned.
Changelog-Fixed: keysend: Keysend now checks whether the destination supports keysend before attempting a payment. If not a more informative error is returned.
The latter is available only starting with Python 3.7, and it's the
only test that fails with <3.7. This allows us to keep on testing with
older versions.
If we're already attempting to connect to a peer, we would ignore
new connection requests. This is problematic if your node has bad
connection details for the node -- you can't update it while inflight.
This patch appends new connection suggestions to the list of connections
to try.
Fixes#4154
We've been getting a bunch of 'warnings' about an unknown mark. This
silences the warning, by registering the mark as expected.
=========================================================== warnings summary ===========================================================
tests/test_closing.py:152
/home/niftynei/dev/lightning/tests/test_closing.py:152: PytestUnknownMarkWarning: Unknown pytest.mark.slow_test - is this a typo? You can register custom marks to avoid this warning - for details, see https://docs.pytest.org/en/latest/mark.html
@pytest.mark.slow_test
tests/test_closing.py:214
/home/niftynei/dev/lightning/tests/test_closing.py:214: PytestUnknownMarkWarning: Unknown pytest.mark.slow_test - is this a typo? You can register custom marks to avoid this warning - for details, see https://docs.pytest.org/en/latest/mark.html
@pytest.mark.slow_test
tests/test_closing.py:704
We used to create the entire reply, the if it was too big, split in
half and retry.
Now that the main network is larger, this always happens with a full
request, which is inefficient.
Instead, produce a reply assuming no compression, then compress as a
bonus. This is simpler and more efficient, at cost of sending more
packets.
I also renamed an internal dev var to make it clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We previously registered hooks up in who-replies-to-getmanifest-first
order, but then if any had dependencies it would scatter that order.
This allows users to manually set dependencies developers have
forgotten by specifying the plugins manually in their configuration or
cmdline. This was an excellent consideration by @mschmook.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will allow nodes (with log-level=debug) to gather how many payments
are made without payment_secrets. We need to know this so we know when
we can make them compulsory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We let the plugin decide what feerate to accept/whether or not to add
funds to the open. To aid this decision, we also send the plugin what we
(c-lightning) currently have as our max and min acceptable feerates.
We also now use these as our default for max/min acceptable feerate
range when sending an openchannel offer to a peer.
In the future, it might be a good idea to make these more easily
changeable, either via a config setting (?) or a command param.
For compatibility, we only do this if `allow-deprecated-apis` is false
for now. Otherwise scripts parsing should use `grep -v '^# '` or
start using `-N none`.
Changelog-Added: JSON-RPC: `close` now sends notifications for slow closes (if `allow-deprecated-apis`=false)
Changelog-Deprecated: cli: scripts should filter out '^# ' or use `-N none`, as commands will start returning notifications soon
Fixes: #3925
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a new configuration, --enable-fuzzing (which is more than
welcome to be coupled with --enable-address-sanitizer), to pass the
fuzzer sanitizer argument when compiling objects. This allows libfuzzer
to actually be able "to fuzz" by detecting coverage and be smart when
mutating inputs.
As libfuzzer brings its own ~~fees~~ main(), we compile objects with
fsanitize=fuzzer-no-link, and special-case the linkage of the fuzz
targets.
A "lib" is added to abstract out the interface to the fuzzing tool used.
This allow us to use the same targets to fuzz using AFL, hongfuzz or w/e
by adding their entrypoints into libfuzz. (h/t to practicalswift who
introduced this for bitcoin-core, which i mimiced)
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
Instead of a boutique message, use a "real" channel_announcement for
private channels (with fake sigs and pubkeys). This makes it far
easier for gossmap to handle local channels.
Backwards compatible update, since we update old stores.
We also fix devtools/dump-gossipstore to know about the tombstone markers.
Since we increment our channel_announce count for local channels now,
the stats in the tests changed too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since `fundchannel` now supports the 'close_to' argument, we can remove
all the logic needed to call fundchannel_start here.
Underneath, we're still calling `fundchannel_start`, we're just one (or
two, if you count multifundchannel) call levels away from it now.
We had one report of this, and then Eugene and Roasbeef of Lightning
Labs confirmed it; they saw misordered HTLCs on reconnection too.
Since we didn't enforce this when we receive HTLCs, we never noticed :(
Fixes: #3920
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: fixed retransmission order of multiple new HTLCs (causing channel close with LND)
We didn't care, but other implementations (particularly lnd) do. And it
does violate the spec.
(We need to use skip not xfail on the test which catches this, since
xfail doesn't seem to stop errors reported by cleanup)
(Includes Christian's typo fix!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're rarely in a hurry here, and bitcoind is aggressive with fees.
You can always spend this output if you really have to, using CPFP.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: mutual closing feerate reduced to "slow" to avoid overpaying.
lightning-5 can sometimes see itself sweeping the unilateral output resulting
in this weird line:
```log
HTLC already resolved by SELF when we found preimage
```
In both cases the flakyness arises from the destination not knowing about the
modified fees of the forwarding node, thus including the outdated details in
the routehint, and the sender being unlucky and always trying with the
routehint anyway.
The long-term solutions to this is going to be #4111, this commit just reduces
the flakyness to get back to business.
We really are just interested in their on-chain footprint, so actually
starting the nodes is pointless overhead, and caused a lot of flakyness due to
the output ordering sometimes not matching up. We now just use the `bitcoind`
API to fund, sign and send a raw transaction that matches the stashed gossip
messages.
We added a conversion of failcodes that do not have sufficient information in
faac4b28ad. That means that a failcode that'd require additional information
in order to be a correct error to return in an onion is mapped to a generic
one since we can't backfill the information.
This tests that the mapping is performed correctly and replicates the
situation in #4070
Changelog-Added: JSON-RPC: delpay a new method to delete the payment completed or failed.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Fixes: #3926
(probably)
Changelog-Fixed: pay: Also limit the number of splits if the payee seems to have a low number of channels that can enter it, given the max-concurrent-htlcs limit.
Hooks do not tolerate failures at all. If we return a JSON-RPC error to a hook
call the only thing the main daemon can really do is to crash. This commit
adds a mapping of error to a safe fallback result, including a warning to the
node operator that this should be addressed in the plugin. The warning is
reported as a `**BROKEN**` message, and should therefore fail any testing done
on the plugin.
Changelog-Fixed: pyln: Fixed HTLCs hanging indefinitely if the hook function raises an exception. A safe fallback result is now returned instead.
This test is flaky because the generated PSBT seems to not have the change
output adjusted, or it is missing.
Tracking-Issue: ElementsProject/lightning#3998
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
fundpsbt / utxopsbt create a (typically) output-less PSBT,
however for elements we require the fees to be encapsulated in an
output.
this patch updates fundpsbt / utxopsbt to add a fee output for elements
transactions. includes test updates.
Fixes#3998
Too trivial a fix to really list in Changelog, but I noticed that we
specified "wumbo" twice. We should really just use the proper name
in listconfigs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: plugin: `bcli` replacements should note that `sendrawtransaction` now has a second required Boolean argument, `allowhighfees`, which if `true`, means ignore any fee limits and just broadcast the transaction. Use `--deprecated-apis` to use older `bcli` replacement plugins that only support a single argument.
I screwed up the rotation logic in an earlier varient of this PR, and
it lead me to discover why test_mpp_interference_2 was flaky.
Really, we should keep a fuzzy estimator of how much payment is
outstanding, but in practice rotation is probably good enough.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
These tests appear in both test_misc.py and test_wallet.py.
I checked, and they're the only duplcates; they were moved in
0543149b89 then re-added (merge error?)
in 67fc8ffbcf.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, simplify: amount is set to 1000000, but then we deposit 1000000 + 0.01btc
(i.e. 2000000), and we always use 2 * amount. Just use a single constant to
make it clear.
Secondly, we assume that the wallet considers outputs spent as soon as
we created the tx: this will not be true once withdraw uses sendpsbt.
So, we generate blocks, but now sometimes withdraw will pick up change
txs, so we need to reserve them to avoid that messing our coinmovements.
Finally, we assumed the withdrawl order was BIP69, which becomes
variable.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Marking spent means if the transaction doesn't confirm for some
reason, the user will need to force a rescan to find the funds. Now
we have timed reservations, reserving for (an additional) 12 hours
should be sufficient.
We also take this opportunity (now we have our own callback path)
to record the tx in the wallet only on success.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some minor phrasing differences cause test changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: txprepare reservations stay across restarts: use fundpsbt/reservepsbt/unreservepsbt
Changelog-Removed: txprepare `destination` `satoshi` argument form removed (deprecated v0.7.3)
With a feerate of 7500perkw and subtracting 660 sats for anchors, a
20,000 sat channel has capacity about 9800 sat, below our default:
You gave bad parameters: channel capacity with funding 20000sat, reserves 546sat/546sat, max_htlc_value_in_flight_msat is 18446744073709551615msat, channel capacity is 9818sat, which is below 10000000msat
So bump channel amounts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And document exactly what it does: insist that an HTLC can pass of
this value (module assumptions of feerate).
Note that we remove the "is_opener" test from the capacity calculation
for anchor fees: it doesn't matter which side it is, someone has to pay
for anchor fees to it deducts from capacity.
This change breaks the test, which we rewrite.
Changelog-Changed: config: `min-capacity-sat` is now stricter about checking usable capacity of channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's actually not possible to currently tell if you're using anchor_outputs
with a peer (since it depends on whether you both supported it at *channel open*).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-added: JSON-RPC: `listpeers` shows `features` list for each channel.
We're failing this too often: we'd fail it more but it's disabled
with VALGRIND (it shouldn't be: @slow_test removes VALGRIND if SLOW_MACHINE
is set).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the simplest possible fix: increase the target amount until we get
the desired number of parts, while still bucketizing payments together that
are in approximately the same size.
The current logic puts all payments that are in the range x < amount <= 16*x
in the same bucket, making them harder to distinguish.
Changelog-Fixed: pay: The `presplit` modifier now supports large payments without exhausting the available HTLCs.
You can't pay them anyway, and at least one person used 0 instead of "any".
Closes: #3808
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice` no longer accepts zero amounts (did you mean "any"?)
This is an extra safety check for dual funding, where we only want to sign
the inputs we provided!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `signpsbt` takes an optional `signonly` array to limit what inputs to sign.
Required for dual funding where the opener sets it.
Changelog-Added: JSON-RPC: `fundpsbt` takes a new `locktime` parameter
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Anchor outputs break many assumptions in our tests:
1. Remove some hardcoded numbers in favor of a fee calc, so we only have to
change in one place.
FIXME: This should also be done for elements!
2. Do binary search to get feerate for a given closing fee.
3. Don't assume output #0: anchor outputs perturb them.
4. Don't assume we can make 1ksat channels (anchors cost 660 sats!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's currently always 0, but it won't be once we replace txprepare.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundchannel` has new `outnum` field indicating which output of the transaction funds the channel.
Reported-by: ZmnSCPxj
Signed-off-by: Christian Decker <@cdecker>
Changelog-Fixed: pay: Correct a case where we put the sub-payment value instead of the *total* value in the `total_msat` field of a multi-part payment.
The worst effect is that unpublished nodes are harder to pay, but
even published ones make us do unnecessary work, since we are
losing routehints from the published ones that could help us
actually route better to them.
On my test machine, we queried bitcoind before the close tx was sent:
```
# When output is spent, it should give us null !
txo = l1.rpc.call("getutxout", {"txid": txid, "vout": 0})
> assert txo["amount"] is txo["script"] is None
E AssertionError: assert '20000000msat' is '00205b8cd3b914cf67cdd8fa6273c930353dd36476734fbd962102c2df53b90880cd'
tests/test_plugin.py:1221: AssertionError
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It might have already happened, and anyway, we wait for the actual state
below.
```
# make database snapshot of l2
l2.stop()
l2_db_path = os.path.join(l2.daemon.lightning_dir, chainparams['name'], 'lightningd.sqlite3')
l2_db_path_bak = os.path.join(l2.daemon.lightning_dir, chainparams['name'], 'lightningd.sqlite3.bak')
copyfile(l2_db_path, l2_db_path_bak)
l2.start()
sync_blockheight(bitcoind, [l2])
# push some money from l3->l2, so that the commit counter advances
l2.rpc.connect(l3.info['id'], 'localhost', l3.port)
> l2.daemon.wait_for_log('now ACTIVE')
tests/test_closing.py:908:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
contrib/pyln-testing/pyln/testing/utils.py:288: in wait_for_log
return self.wait_for_logs([regex], timeout)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <pyln.testing.utils.LightningD object at 0x7f0c145a32d0>
regexs = ['now ACTIVE'], timeout = 60
def wait_for_logs(self, regexs, timeout=TIMEOUT):
"""Look for `regexs` in the logs.
We tail the stdout of the process and look for each regex in `regexs`,
starting from last of the previous waited-for log entries (if any). We
fail if the timeout is exceeded or if the underlying process
exits before all the `regexs` were found.
If timeout is None, no time-out is applied.
"""
logging.debug("Waiting for {} in the logs".format(regexs))
exs = [re.compile(r) for r in regexs]
start_time = time.time()
pos = self.logsearch_start
while True:
if timeout is not None and time.time() > start_time + timeout:
print("Time-out: can't find {} in logs".format(exs))
for r in exs:
if self.is_in_log(r):
print("({} was previously in logs!)".format(r))
> raise TimeoutError('Unable to find "{}" in logs.'.format(exs))
E TimeoutError: Unable to find "[re.compile('now ACTIVE')]" in logs.
contrib/pyln-testing/pyln/testing/utils.py:264: TimeoutError
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The modded_psbt is not necessarily invalid:
# Try a modified (invalid) PSBT string
modded_psbt = psbt[:-3] + 'A' + psbt[-3:]
with pytest.raises(RpcError, match=r"should be a PSBT, not"):
> l1.rpc.signpsbt(modded_psbt)
E AssertionError: Pattern 'should be a PSBT, not' not found in 'RPC call failed: method: signpsbt, payload: {'psbt': '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'}, error: {'code': -1, 'message': 'No wallet inputs to sign'}'
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
listpays: make doc-all missed
Changelog-Added: JSON-RPC: `listpays` can be used to query payments using the `payment_hash`
Changelog-Added: JSON-RPC: `listpays` now includes the `payment_hash`
And when it's set, and we're SLOW_MACHINE, simply disable valgrind.
Since Travis (SLOW_MACHINE=1) only does VALGRIND=1 DEVELOPER=1 tests,
and VALGRIND=0 DEVELOPER=0 tests, it was missing tests which needed
DEVELOPER and !VALGRIND.
Instead, this demotes them to non-valgrind tests for SLOW_MACHINEs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I started replacing all get_node() calls, but got bored, so then just did the
tests which call get_node() 3 times or more.
Ends up not making a measurable speed difference, but it does make some
things neater and more standard.
Times with SLOW_MACHINE=1 (given that's how Travis tests):
Time before (non-valgrind):
393 sec (had 3 failures?)
Time after (non-valgrind):
410 sec
Time before (valgrind):
890 seconds (had 2 failures)
Time after (valgrind):
892 sec
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I thought this was timing out because I made it slow with the
change to txprepare as a plugin. In fact, it was timing out
because sometimes gossip comes so fast it gets suppressed
and we never get the log messags.
Still, before this it took 98 seconds under valgrind and
24 under non-valgrind, so it's an improvement to time as
well as robustness.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: pay: Fixed a bug where routehints would be ignored if the payment exceeded 10,000 satoshi. This is particularly bad if the payee is only reachable via routehints in an invoice.
Changelog-Added: New option `--important-plugin` loads a plugin is so important that if it dies, `lightningd` will exit rather than continue. You can still `--disable-plugin` it, however, which trumps `--important-plugin` and it will not be started at all.
the way we use PSBTs to sign things requires that we have the
scriptpubkey available on the utxo so we can populate the witness-utxo
field with it.
this causes problems if we don't already have the scriptpubkey cached in
the database, as in *some* cases we require a round trip to the HSM to
populate them
to get over this hump, we backfill any and all missing scriptpubkey
information for the utxo's that we hold in our wallet.
this will allow us to clean up the NULL handling of missing
scriptpubkeys.
```
# Excludes channel, then ignores routehint which includes that, then
# it excludes other channel.
> assert len(status) == 2
E assert 1 == 2
E -1
E +2
```
The invoice we use at the end has a routehint: 50% of the time it's
to l2 (which fails), 50% to l5 (which succeeds).
Change it to create invoice before channel with l5 so it does the
retry like we expect here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We sum up the amounts just like we do with `amount_sent`, however we may have
parts that don't have that annotation, so make it optional.
Suggested-by: Rusty Russell <@rustyrussell>
Since we started using `sendonion` in the `pay` plugin we no longer
automatically have the `amount` annotation on (partial) payments. This
replicates the issue so we can fix it.
Reported-by: Rusty Russell <@rustyrussell>
The adaptive MPP test was showing an issue with always using a routehint, even
when it wasn't necessary: we would insist on routhing to the entrypoint of the
routehint, even through the actual destination. If a channel on that loop
would result being over capacity we'd slam below 0, and then increase again by
unapplying the route. The solution really is not to insist on routing through
a routehint, so we implement random skipping of routehints, and we rotate them
if we have multiples.
Changelog-Fixed: plugin: `bcli` no longer logs a harmless warning about being unable to connect to the JSON-RPC interface.
Changelog-Added: plugin: Plugins can opt out of having an RPC connection automatically initialized on startup.
This PR includes the fix discussed on PR #3855. This fix was tested with the use case described inside the issue and worked.
Fixes: #3855
Changelog-None
The test had part 1 and 2 backward, but still worked. When I copied that to
*after* the test had succeeded, it complained. It should always complain,
to catch bugs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This wasn't important before, but now we have MPP it's good to enforce.
Reported-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
While we were unsetting the `payment->cmd` in case of a success to signal that
we should not return to the JSON-RPC command twice, we were not doing that in
the case of failures. This was causing multiple responses to a single incoming
command, and `lightningd` was correctly killing the plugin. This issue was
introduced through early returns (anything setting `payment->abort=true`) and
was caused in Rusty's case through an MPP timeout.
Fixes#3847
Reported-by: Rusty Russell <@rustyrussell>
Signed-off-by: Christian Decker <@cdecker>
Rusty Russell
niftynei
Christian Decker
Karol Hosiawa
Michael Schmoock
Antoine Poinsot
ZmnSCPxj jxPCSnmZ
fiatjaf
Jan Sarenik
Vincenzo Palazzo
Vincent