1. anchor_to_remote_redeem => bitcoin_wscript_to_remote_anchored,
which matches other witness script producing functions and makes
it clear that it's a to_remote variant.
2. is_anchor_witness_script => is_to_remote_anchored_witness_script
makes it clear that it's about a to_remote output (as altered
when anchors are enabled) not an anchor output!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Libwally update breaks compatibility, so
we do this in one large step.
Changelog-Changed: JSON-RPC: elements network PSET now only supports PSETv2.
Changelog-Added: JSON-RPC: PSBTv2 supported for fundchannel_complete, openchannel_update, reserveinputs, sendpsbt, signpsbt, withdraw and unreserveinputs parameter psbt, openchannel_init and openchannel_bump parameter initialpsbt, openchannel_signed parameter signed_psbt and utxopsbt parameter utxopsbt
We were missing the OP_PUSH for the pubkeys, and the spec mentions we
should be using 73 bytes to estimate the witness weight. Effectively
this adds 4 bytes which really just matters in case fees hit the
floor, and computing the weight becomes important.
Changelog-Fixed: onchaind: Witness weight estimations could be slightly lower than the VLS signer
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should actually be including this (as it may define _GNU_SOURCE
etc) before any system headers. But where we include <assert.h> we
often didn't, because check-includes would complain that the headers
included it too.
Weaken that check, and include config.h in C files before assert.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Until it gains miniscript support, wally doesn't know how to
finalize P2WSH. This happens with `option_anchor_outputs` for
to-remote, which requires a 1 block delay to force use of
anchor outputs for CPFP.
So we finalize this ourselves.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't preserve detailed asset information at the moment, so provide a
way to convert from a sat to an amount_asset struct.
We also need a way to convert from an 'amount_asset' to a 'value' for
elements, which for explicit (i.e. non-blinded) asssets is a 0x01 prefix
plus the big-endian encoded value.
most likely unused since the switch to libwally for internal blockchain
things.
these method names were clashing with ones that are to be introduced
with some libwally cleanups, so getting rid of them pre-emptively keeps
us libwally compatible
Our existing coin_moves tracking logic assumed that any tx we had an
input in belonged to *all* of our wallet (not a bad assumption as long
as there was no way to update a tx that spends our wallets)
Now that we've got `signpsbt` implemented, however, we need to be
careful about how we account for withdrawals. For now we do a best guess
at what the feerate is, and lump all of our spent outputs as a
'withdrawal' when it's impossible to disambiguate
Move all psbt creation into single method, new_psbt
note that if a psbt is init'd for a transaction that's
deserialized with scripts etc already attached, then set_global_tx
will fail. instead, we empty all of this out first.
if the tx is being re-init'd from a tx source that had a psbt attached
(e.g. fromwire_) then the script/witness data will get populated
appropriatel from there.
It returns NULL, so you can simply `return fromwire_fail(...)`
if you want to return NULL in this case. Use that more.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
We did this originally because these types are referred to in the bolts, and we
had no way of injecting the correct include lines into those. Now we do, so
there's less excuse for this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently the only source for amount_asset is the value getter on a tx output,
and we don't hand it too far around (mainly ignoring it if it isn't the
chain's main currency). Eventually we could bubble them up to the wallet, use
them to select outputs or actually support assets in the channels.
Since we don't hand them around too widely I thought it was ok for them to be
pass-by-value rather than having to allocate them and pass them around by
reference. They're just 41 bytes currently so the overhead should be ok.
Signed-off-by: Christian Decker <@cdecker>
This will never be reliable under high load, without making it unable
to detect real errors. But the test is useful because if we don't
have this test we'll never notice if we break the const-timedness of
our implementation.
So, move the calloc out of the test loop (which seems to make it more
reliable), and then after we've run it, check the 1-minute load
average. Too high, we don't complain about results. It's not
perfect, but it's better.
Running 100 times (-O3) serially gave 100 successes with the following results:
Constant: Within 5% 562-926(832.89+/-73)/1000 times
Non-constant: More than 5% slower 860-990(956.35+/-26)/1000 times
More importantly, if we swap the const and non-const tests, we get
the expected 100 failures:
Non-constant: Within 5% 14-79(41.17+/-14)/1000 times
Constant: More than 5% slower 44-231(111.89+/-33)/1000 times
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is more reliable under load now: shorten the times so it is
likely to run in a single timeslice, and add a nanosleep so it's
likely to be at the start of the timeslice.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We check that memcmp *isn't* constant time, but that's only true under
-O2 or above: __OPTIMIZE__ doesn't distinguish.
So we need a finer-grained test. Also reduce verbosity by default.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fixes block parsing on testnet; specifically, non-standard tx versions.
We hit a type bug in libwally (wallt_get_secp_context()) which I had to
work around for the moment, and the updated libsecp adds an optional hash
function arg to the ECDH function.
Fixes: #2563
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Greg Sanders
arowser
Christian Decker
niftynei
Jon Griffiths
Simon Vrouwe