Track rebalances, and report income events for them.
Previously `listincome` would report:
- invoice event, debit, outgoing channel
- invoice_fee event, debit, outgoing channel
- invoice event, credit, inbound channel
Now reports:
- rebalance_fee, debit, outgoing channel
(same value as invoice_fee above)
Note: only applies on channel events; if a rebalance falls to chain
we'll use the older style of accounting.
Changelog-None
First, how we record "our_funds" and then apply pushes vs lease_fees
(for liquidity ad buys/sales) was exactly opposite.
For pushes we were reporting the total funded into the channel, with the
push representing how much we'd later moved to the peer.
For lease_fees we were rerporting the total in the channel, with the
push representing how much was already moved to the peer.
We fix this (from a view perspective) by re-adding lease fees to what's
reported in the channel funding totals. Since this is now new behavior
(for leased channel values), we added new fields so we can take the old
field names thru a deprecation cycle.
We also make it possible to differentiate btw a push and a lease_fee
(before they were all the same), by adding to new fields to `listpeers`:
`fee_paid_msat` and `fee_rcvd_msat`.
This allows us to avoid math in the bookkeeper, instead we just pick
the numbers out directly and record them.
Fixes#5472
Changelog-Added: JSON-RPC: `listpeers` now has a few new fields for `funding` (`remote_funds_msat`, `local_funds_msat`, `fee_paid_msat`, `fee_rcvd_msat`).
Changelog-Deprecated: JSON-RPC: `listpeers`.`funded` fields `local_msat` and `remote_msat` are now deprecated.
`lightningd` has an option --wallet that lets you supply a database dsn
string to connect to a sqlite3/postgres database that's hosted/stored
elsewhere.
This adds the `--bookkeeper-db` option which does the same, except for
the bookkeeping data for a node!
Note that the default is to go in the `lightning-dir` in a database
called `accounts.sqlite3`
Adds schema definitions and manpages for bkpr- commands; also renames
the commands to all start with 'bkpr-', so they're easier to identify/
make runes about.
If rune contains invalid UTF-8, offers (which implements decode) would
produce JSON with invalid UTF-8, which causes lightningd to complain
and kill it, and then die because it's an important plugin.
So don't decode invalid UTF-8!
Reported-by: @jb55
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This gives a nice way to ensure your secret is the correct one.
Also, we don't need to suppress VALGRIND for this test, now the output
races are fixed.
Changelog-Added: `hsmtool`: new command `checkhsm` to check BIP39 passphrase against hsm_secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Most unexpected ones are still 1, but there are a few recognizable error codes
worth documenting.
Rename the HSM ones to put ERRCODE_ at the front, since we have non-HSM ones
too now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Returning an warning message when the pub key is not specified and there is no node in the graph.
We try to help people that use core lightning as a signer and nothings else.
Changelog-Deprecated: rpc: checkmessage return an error when the pubkey is not specified and it is unknown in the network graph.
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit weird since it lives in the offers plugin, but it works
well. This should make runes much more approachable for people!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I'm assuming that nobody wants a rate slower than 1 per minute; we can
introduce 'drate' if we want a per-day kind of limit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was introduced to allow creating a shared secret, but it's better to use
makesecret which creates unique secrets. getsharedsecret being a generic ECDH
function allows the caller to initiate conversations as if it was us; this
is generally OK, since we don't allow untrusted API access, but the commando
plugin had to blacklist this for read-only runes explicitly.
Since @ZmnSCPxj never ended up using this after introducing it, simply
remove it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSONRPC: `getsharedsecret` API: use `makesecret`
There's one case where we can present more infomation, so do that, and
fix documentation.
Changelog-Added: JSON-RPC: `listforwards` now shows `out_channel` in more cases: even if it couldn't actually send to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5329
It actually only sets the prefix for the lightningd core log messages;
the other logs have their own prefix.
Make it a real, process-wide prefix which actually goes in front of the timestamp.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: options: `log-prefix` now correctly prefixes *all* log messages.
That's useful for "tell me everything about this node" debugging.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5348
Changelog-Added: lightningd: `log-level=debug:<partial-nodeid>` supported to get debug-level logs for everything about a peer.
This will eventually enable us to specify 0 for zeroconf channels.
Changelog-Added: JSON-RPC: Added `mindepth` argument to specify the number of confirmations we require for `fundchannel` and `multifundchannel`
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
The message was
[warn] CookieAuthFileGroupReadable is set, but will have no effect: you must specify an explicit CookieAuthFile to have it group-readable.
Changelog-None
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
This prepares for when they start being u64, not strings with msat appended.
This has a strange side effect on our schema: despite the name,
decodepay's `fee_base_msat` is actually a u64, which we now convert to
msat on decode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Changelog-Added: Plugins: `htlc_accepted` now exposes the `short_channel_id` for the channel from which that HTLC is coming from and the low-level per-channel HTLC `id`, which are necessary for bridging two different Lightning Networks when MPP is involved.
When starting a plugin, if the plugin path cannot be found in
absolute context, assume it is a relative path to the default
plugins dir. As a result, the following now works when my_plugin.py
is installed in the default plugins dir:
lightning-cli plugin start my_plugin.py
Also update the plugin documentation to reflect that the use of a
relative path is now available.
Changelog-Added: plugin start RPC subcommand now assumes relative path to default plugins dir if the path is not found in absolute context. i.e. lightning-cli plugin start my_plugin.py
[ Squashed two commits into one -- RR ]
Switching to poetry, and deprecating python 3.6, made things a bit
more tricky. Sadly we'll not be able to build jammy, as its support is
missing in the tag tarball, but it'll be there for the next release.
When building reproducible build for Bionic:
```
Traceback (most recent call last):
File "/usr/local/bin/mrkd", line 8, in <module>
sys.exit(main())
File "/usr/local/lib/python3.6/dist-packages/mrkd/__init__.py", line 261, in main
result = mistune.markdown(fp.read(), inline=inline, renderer=renderer)
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1856: ordinal not in range(128)
doc/Makefile:120: recipe for target 'doc/lightning-getinfo.7' failed
make: *** [doc/lightning-getinfo.7] Error 1
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The relative path makes for a difficult experience when people are reading on `https://lightning.readthedocs.io/`. Directly linking saves the reader a few clicks hunting down the correct location :)
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
changed `make` to `poetry run make`.
Also moved the spot where `poetry install` is run as it wouldn't make sense to run it before the project is cloned.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has `description` parameter, will be required if bolt11 only has a hash.
Changelog-Deprecated: JSON-RPC: `pay` for a bolt11 which uses a `description_hash`, without setting `description`.
This is what LND does, and it's better for upper layers than trying to
twist our maxfeepercent / exemptfee heuristics to suit.
(I don't remember who complained about this, sorry!)
I'm doing this now because I want to add YA parameter next!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has new parameter `maxfee` for setting absolute fee (instead of using `maxfeepercent` and/or `exemptfee`)
Types are fixed, in particular:
* rename "OutputDesc" to more consistent "outputdesc".
* rename "utxo" to more consistent "outpoint".
* it's "boolean" not "bool".
* "number" means int or float, usually it should be u32.
Specific commands:
* close `id` can be by channel id, scid.
* close `feerange` is a feerate type.
* datastore/deldatastore/listdatastore `key` can be singleton.
* delexpiredinvoice: `maxexpirytime` is not required, is a u64.
* invoice/delinvoice/listinvoice `label` can be an integer
* fundpsbt: many fields are u32 not number (JSON for int or float).
* invoice: `msatoshi` can be "any".
* invoice: `expiry` has a type (now must be numeric).
* invoice: `exposeprivatechannels` can be bool or array of scids.
* invoice: `deschashonly` added
* keysend: there's no "float" type, use "number" or "u32" etc.
* keysend: `routehints` is a valid arg, as is `extratlvs` (EXPERIMENTAL_FEATURES)
* listdatastore: `key` is not required.
* newaddr: `addresstype` can be "all"
* pay: `exemptfee` is "msat", new fields `locaofferid` and `exclude`
* sendonion: was mis-formatted, missed `localofferid` and `groupid` fields.
* sendpay: add `localofferid` and `groupid` params.
* signpsbt: add `signonly` param.
* txprepare "outptus" typo.
* waitsendpay: add `groupid` and fix `partid` type.
* withdraw: `destination` is a bitcoin address, not a pubkey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Makes types harder, and I've never personally used them.
Changelog-Deprecated: JSON-RPC: `invoice` `expiry` no longer allowed to be a string with suffix, use an integer number of seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make it always a number; this makes the JSON request specification
simpler. We allowed a number since v0.10.1.
(reserve=True is the default anyway, so usually it can be omitted:
reserve=False becomes reserve=0).
Changelog-Deprecated: JSON-RPC: `fundpsbt`/`utxopsbt` `reserve` must be a number, not bool (for `true` use 72/don't specify, for `false` use 0). Numbers have been allowed since v0.10.1.
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
LNURL wants this so they can include images etc in descriptions.
Replaces: #4892
Changelog-Added: JSON-RPC: `invoice` has a new parameter `deschashonly` to put hash of description in bolt11.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
Based on setchannelfee, but expanded to allow setting max htlc amount (and others
in future?).
The main differences:
1. It doesn't change values which are not specified (that would be hard to
add fields to!)
2. It says exactly what all values are in any potentially changed channels.
Changelog-Added: JSON-RPC: new `setchannel` command generalizes `setchannelfee`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a low-level interface now, expecting you to build your own TLVs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: @valentinewallace
Update TOR.md
Update tor install to represent current systemd syntax for enabling and starting a new system service
Corrected a typo. After tor is installed to refresh /etc/tor/torrc config changes the command should be 'sudo systemctl restart tor' not 'sudo systemctl start tor'
Having a list of very targeted suppressions allows us to still run the
majority of tests with valgrind checking, and not fail when Rust does
some trickery. This is for example the case with `std::sync::Once`
which uses `num_procs` calling out to the cgroups subsystem, sometimes
with a null path.
Suggested-by: Rusty Russell <@rustyrussell>
Useful for accounting for missed/historical channel opens, to figure out
what the actual sat contribution from each peer is at a utxo level
Changelog-Added: JSONRPC: `listpeers` now includes a `pushed_msat` value. For leased channels, is the total lease_fee.
Changelog-Experimental: option `--lease-fee-base-msat` renamed to `--lease-fee-base-sat`
Changelog-Experimental: option `--lease-fee-base-msat` deprecated and will be removed next release
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
I've tried automatically parsing the docs, and these inconsistencies made it harder to do that.
(I tried to do that for a project which I can't share yet, I'm not sure if it'll even work).
The blockheight is zero though, since these aren't included in a block
yet.
We also don't issue an 'external' deposit event if we can tell that the
address you're sending to actually belongs to our wallet (we'll issue a
deposit event when it gets included in a block)
If a coin move concerns an external account, it's really useful to know
which 'internal' account initiated the transfer.
We're about to add a notification for withdrawals, so we can use this to
track wallet pushes to outside addresses
Changelog-Added: JSONRPC: `coin_movement` to 'external' accounts now include an 'originating_account' field
Fire off a snapshot of current account balances (node wallet + every
'active' channel) after we've caught up to the chain tip for the *first*
time (in other words, on start).
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
Get rid of the 'movement_idx', since we replay events now.
Since we're removing a field from the 'coin_movement' event emission, we
bump the version type.
Changelog-Updated: `coin_movements` events have been revamped and are now on version 2.
Don't do this on every build, it takes 4 seconds. And split it
into individual targets, so make can parallelize (1.6 seconds here).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4785Fixes: #4883
Changelog-Changed: Plugins: `shutdown` notification is now send when lightningd is almost completely shutdown, RPC calls then fail with error code -5.
This include the following commits:
- review 1/2: move from tab to space, and remove the exp. prop from doc;
- review 2/2: remove experimental features;
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
I noticed that `wallet/db_postgres.c` never actually calls `db_changes_add`.
PostgreSQL arguably has a better replication system (a PostgreSQL cluster)
than what `db_write` hook can offer, so rather than make `db_write` work on
PostgreSQL, just document that it does not actually work there.
ChangeLog-none
ChangeLog-Added: With the `sqlite3://` scheme for `--wallet` option, you can now specify a second file path for real-time database backup by separating it from the main file path with a `:` character.
autotor is older, but statictor is better. Your options are really
"use HiddenServiceDir in torrc" vs "use statictor", with the issue
that statictor requires you to configure Tor for control access by
c-lightning.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
mrkd doesn't like non-ASCII characters in ubuntu:18.04, used for
repro-builds. This is the easiest way to sidestep this issue until we
deprecate the old ubuntu version.
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
It's probably not worth fixing for the other daemons.
Changelog-Changed: JSON-RPC: `ping` now only works if we have a channel with the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the now-removed chains field, and in deprecated mode, we set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `chains` in invoice_request and invoice is deprecated, `chain` is used instead.
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
This adds a new hook: onion_message_ourpath for when we know a message
came in via a blinded path we created. The onion_message_blinded hook
is now called for all other messages, since all messages are now
blinded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required for the setuptools_scm package to correctly identify
the root of the git repository when installing from the
requirements.txt file in the root. It'd otherwise copy the source
directory, which doesn't yet include the version metadata, into a
separate directory and the building from there, which breaks the
git lookup.
`in-tree-build` is the future default, so we'll eventually be able to
strip that option again. See [1] for details.
[1] https://github.com/pypa/pip/issues/7555
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
By popular merge-hell demand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Build: Python is now required to build, as generated files are no longer checked into the repository.
Suggested by @cdecker
P.S: Also this include an API refactoring from my previous solution, also this it is suggested by @cdecker.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Added: Support to listpays the status parameter to filter the payments by status.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Shows the dangers of "additionalProperties": true. We didn't have an else
clause, so our incorrect (and, with DF, incomplete!) schema was accepted.
I despair of getting anyone else to write a decent schema with these
semantics :(
Changelog-Fixed: doc: listnodes fields now correctly documented.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After some discussion with @shesek, and my own usage, we agreed that
a more comprehensive interface, which explicitly supports grouping,
is desirable.
Thus keys are now arrays, with the semantic that a key is either a
parent or has a value, never both.
For convenience in the JSON schema, we always return them as arrays,
though we accept simple strings as arguments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We add a generation counter, and allow update or del conditional
on a given generation.
Formalizes error codes, too, since we have more now.
Suggested-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `datastore`, `deldatastore` and `listdatastore` for plugins to store simple persistent key/value data.
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
It subsumes `decodepay`, and it's nicer if people can just assume it's
available at all times.
Changelog-Added: JSON-RPC: `decode` now available without `experimental-offers`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out we didn't actually test this at all, and next commit does :(
offer_status_in_db: 4 is invalid
lightningd: FATAL SIGNAL 6 (version v0.10.0-459-g48fbd45-modded)
0x5608cd360855 send_backtrace
common/daemon.c:39
0x5608cd3608ff crashdump
common/daemon.c:52
0x7f9af1dae20f ???
???:0
0x7f9af1dae18b ???
???:0
0x7f9af1d8d858 ???
???:0
0x5608cd30a47e fatal
lightningd/log.c:819
0x5608cd3430c5 offer_status_in_db
wallet/wallet.h:1424
0x5608cd34f1f3 wallet_offer_disable
wallet/wallet.c:4494
0x5608cd33ae2e json_disableoffer
lightningd/offer.c:256
0x5608cd3038fc command_exec
lightningd/jsonrpc.c:643
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@shesek points out that we called this field created_at in bolt11 decode,
which makes more sense anyway.
Changelog-EXPERIMENTAL: bolt12 decode `timestamp` field deprecated in favor of new name `created_at`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Documentation for the funderupdate command on the funder plugin.
Realized we were missing the "leases_only" in the output; also adds
'_msat' to msat denominated outputs so they're parsed correctly by our
python bindings (also matches our naming conventions)
Changelog-EXPERIMENTAL: funder: `funderupdate` command to view and update params for contributing our wallet funds to v2 channel openings. Provides params for enabling `option_will_fund`.
We need to know what the lease we're expecting is. To do this
we pass around the hex encoded portion of the wire format.
We can use this passed in expected lease rates to confirm that the peer
is, in fact, using the same rates as what we have currently.
Changelog-Added: JSON-RPC: fundchannel, multifundchannel, and openchannel_init now accept a 'compact_lease' for any requested funds
By default, we won't close a channel that we leased to a peer.
You can override this with the `force_lease_closed` flag.
Changelog-Added: JSON-RPC: close now has parameter to force close a leased channel (option_will_fund)
Useful for parsing a passed in feerate before calling lightningd with
it, e.g. when you need to know what the feerate is for a fundpsbt before
calling fundpsbt
Changelog-Added: JSON-RPC: new command `parsefeerate` which takes a feerate string and returns the calculated perkw/perkb
When a request comes through, we forward it over to the funder who
uses the currently set policy to figure out how to handle it.
Includes small update to the policy engine which decides whether or not
to fund a request.
Changelog-Experimental: Plugins: `openchannel2` hook now includes optional fields for a channel lease request
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This makes it easier to access (rather than decoding bolt11).
Changelog-Added: JSON-RPC: `invoice` now outputs explicit `payment_secret` it its own field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
Vincenzo Palazzo
Seth For Privacy
William Casarin
CC
Rusty Russell
Christian Decker
grubles
zero fee routing
adi2011
Michael Schmoock
Simon Vrouwe
grubles
Igor Bubelov
Jan Sarenik
Justin Litchfield
fiatjaf
AutonomousOrganization
Brian Barto
Gregory Sanders
Kristaps Kaupe
Stephen Webel
Clay Shoaf
kiwiidb
Sjors Provoost
Aaron Dewes
Jules Comte
GoofyAF
Tim W
Dustin Dettmer
Andrew Toth
ZmnSCPxj jxPCSnmZ
jerzybrzoska
Alex
LightningHelper
nathanael