This is used to customize the features we report to the peer. Allows
us to blank the zeroconf option if we don't allow the peer to open a
zeroconf channel with us.
Adds 3 options:
- `experimental-zeroconf` to set the featurebit in the init, needed
to use zeroconf at all, otherwise it's disabled system-wide
- `zeroconf-allow` adds a single node_id to the allowlist for which
to accept a zeroconf channel from
- `zeroconf-allow-all` allow zeroconf channels from any node that we
connect to or that connects to us
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds config and commandline options for htlc_min_msat, htlc_max_msat and
announce_discovered_ip. The default is 0msat for htlc_min_msat, unlimited for
htlc_max_msat and enabled for announce_discovered_ip.
The announce_discovered_ip gets the disable commandline switch --disable-ip-discovery
Changelog-added: Config options for htlc_min_msat, htlc_max_msat and announce_discovered_ip.
Makes types harder, and I've never personally used them.
Changelog-Deprecated: JSON-RPC: `invoice` `expiry` no longer allowed to be a string with suffix, use an integer number of seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this (send warnings) in almost all cases anyway, so mainly this
is a textual update, but there are some changes:
1. Send ERROR not WARNING if they send a malformed commitment secret.
2. Send WARNING not ERROR if they get the shutdown_scriptpubkey wrong (vs upfront)
3. Send WARNING not ERROR if they send a bad shutdown_scriptpubkey (e.g. p2pkh in future)
4. Rename some vars 'err' to 'warn' to make it clear we send a warning.
This means test_option_upfront_shutdown_script can be made reliable, too,
and it now warns and doesn't automatically close channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
Regenerate from current BOLTS via `make extract-bolt-csv`
1. The remote_addr field was added manually into peer_wire.csv: this
needs to be a patch otherwise it vanishes on regen.
2. We never brought into the channel_disabled fields, because it was
too much hassle (we never actually generate this!). Do it now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Gossipd didn't actually suppress all gossip, resulting in a flake!
Doing it in connectd now makes much more sense.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Partial revert of 43a833e405
"lightningd: remove support for legacy onion format."; we restore the
ability to decode legacy onions for forwarding, but not to generate them.
(We don't accept them properly since making payment_secret compulsory
anyway, so no real change there!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: ... but we still forward legacy HTLC onions for now.
These trip when anything weird happens; turns out that we tell
onchaind about old htlcs (e.g. for penalties), so in that case we can
actually have it tell us about missing HTLCs which we no longer have
in memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't actually fix anything, but may shed more clues if it
happens again.
The broken() logs are overzealous, see next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get some memleak reports because ld owns the subd, but once
the peer/channel is freed, there's no reference for the brief time
until the subd exits.
This happens for both opening and closingd. For openingd, the
peer owns it, for others (including dualopend) the channel owns it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
LNURL wants this so they can include images etc in descriptions.
Replaces: #4892
Changelog-Added: JSON-RPC: `invoice` has a new parameter `deschashonly` to put hash of description in bolt11.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Requiring the caller to allocate them is ugly, and differs from
other types.
This means we need a context arg if we don't have one already.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more "towire_offer", but "towire_tlv_offer".
This means we double-up on the unfortunately-named `tlv_payload` inside
the onion, but we should rename that in the spec when we remove
old payloads.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, this changes the name of a field in invoice_request:
`payer_signature` becomes simply `signature`. So we allow both for
now, and send the old one unless deprecated_apis is disabled.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also has to fix up tests.
Changelog-Fixed: cli doesn't required anymore to confirm the password if the `hsm_secret` is already encrypted.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Fixed: check if the pass and the confirmation pass match from the command line
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This avoids reuse which can cause confusion; the long-term fix is to
rewrite this to use real channels like dualfunding does.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make sure it sees disconnect before reconnect, otherwise the next command
fails since we're now disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the address and direction as soon as it connects not just when
we're about to make it active: we want this even if we don't have
an active channel, or if the connect hook rejects it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
More efficient to search a known peer than the whole set.
Also, move find_channel_by_id() from channel_control.c into channel.c
where we'd expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Activate means a specific thing now (connectd said something), so avoid
confusing it with this function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Generally this means converting a lazy "peer_active_channel(peer)" call
into an explicit iteration.
1. notify_feerate_change: call all channels (ignores non-active ones anyway).
2. peer_get_owning_subd remove unused function.
3. peer_connected hook: don't save channel, do lookup and iterate channels.
4. In json_setchannelfee "all" remove useless call to peer_active_channel
since we check state anyway, and iterate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian Decker
Rusty Russell
Michael Dance
Michael Schmoock
Sjors Provoost
Vincenzo Palazzo