Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Instead of doing this weird chaining, just call them all at once and
use a reference counter.
To make it simpler, we return the subd_req so we can hang a destructor
off it which decrements after the request is complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
It's weird to have connectd ask gossipd, when lightningd can just do it
and hand all the addresses together.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
connectd is going to end up using this do demux; make it fast and complete.
Fixing this reveals a problem in openingd: it now extracts the channel_id
from funding_signed (which is where we transition off the temporary), and
gets upset. So fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
we used this originally to suppress duplicate issuance of coin-move
events; we're assuming that any plugin expects duplicate events though
(and knows how to de-dupe them), so we no longer need this logic.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
This makes it easier to access (rather than decoding bolt11).
Changelog-Added: JSON-RPC: `invoice` now outputs explicit `payment_secret` it its own field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This supports reestablish on a closed channel: we tell channeld to
respond to the reestablish message appropriately, then close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
This turned into a more extensive cleanup than intended. The previous
warnings were overlapping and confusing, especially now MPP is the norm.
*warning_capacity* is now the "even under best circumstances, we don't
have enough incoming capacity", which is really what
warning_mpp_capacity was trying to say (no longer printed).
*warning_offline* and *warning_deadends* are only given if adding such
peers would have helped give capacity (i.e. not if *warning_capacity*
is set). The new *warning_private_unused* tells you that we would
have sufficient capacity, but we refused to expose private channels.
The test cases have been enhanced to cover the new warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now gives `warning_private_unused` if unused unannounced channels could have provided sufficient capacity.
Changelog-Changed: JSON-RPC: `invoice` warnings are now better defined, and `warning_mpp_capacity` is no longer included (since `warning_capacity` covers that).
Prior to this, sending a v1 address (or, in fact, any random crap!)
would cause the unsupporting node to unilaterally close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the peer is offline when we see the funding txid, we don't actually
update the channel's info. Here, we move it up to where the scid is set,
so that we always update the channel's funding_txid to the correct
(mined) information.
Trying to put all the disconnect logic into the same path was a dumb
idea. If you asked to reconnect but passed in an 'unsaved' channel, we
would not call the 'reconnect' code.
Instead, we make a differentiation between "unsaved" channels
(ones that we haven't received commitment tx for) and handle the
disconnect for these separate from where we want to do a reconnect.
This matters: if we connected, the address is probably usable for future connections.
But if they connected, the port is probably not (but the IP address may be).
Changelog-Added: JSON-RPC: `connect` returns "direction" ("in": they iniatated, or "out": we initiated)
Changelog-Added: plugins: `peer_connected` hook and `connect` notifications have "direction" field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listpeers` now includes 'last_feerate', 'next_feerate', 'initial_feerate' and 'next_fee_step' for channels in state DUALOPEND_AWAITING_LOCKIN
fixup! listpeers: include feerate info for RBF-candidate channels
Rusty Russell
Ken Sedgwick
Michael Schmoock
Simon Vrouwe
niftynei