We use a database snapshot with 3 channels -- two of which have HTLCs
dangling and one is an initial open channel tx in the 'old' tx hex
format in last_tx and confirm that they are successfully updated to PSBT
format on start.
Spec is wrong (it says it should be compulsory), and Eclair doesn't set it
at all, leading to an error when they send their announcement_signatures.
Fixes: #3703
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: large-channels: negotiate successfully with Eclair nodes.
There are various places where our tests failed with
--enable-expimental-features. And our plugin test overlapped an
existing feature.
We make our expected_feature functions more generic, and use them
everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Much nicer for grepping, since `{ "foo": { "bar": [7] } }` is turned into
`foo.bar[0]=7`.
Changelog-Added: cli: New `--flat` mode for easy grepping.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-H removes the top-level if there's only one, and 'format-hint'
breaks this heuristic, so we end up with:
```
help=command=autocleaninvoice [cycle_seconds] [expired_by]
category=plugin
description=Set up autoclean of expired invoices.
verbose=Perform cleanup every {cycle_seconds} (default 3600), or disable autoclean if 0. Clean up expired invoices that have expired for {expired_by} seconds (default 86400).
command=check command_to_check
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We've been seeing some Travis timeouts under VALGRIND, with the
10 second timeout here: use TIMEOUT as per standard.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's possible for our peer to publish a commitment tx that has already
updated our balance for an htlc before we've completed removing it from
our commitment tx (aka before we've updated our balance). This used to
crash, now we just update our balance (and the channel balance logs!)
and keep going.
If they've removed anything from our balance, we'll end up counting it
as chain_fees below. Not ideal but fine... probably.
This moves the notification for our coin spends from when it's
successfully submited to the mempool to when they're confirmed in a
block.
We also add an 'informational' notice tagged as `spend_track` which
can be used to track which transaction a wallet output was spent in.
Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
On node start we replay onchaind's transactions from the database/from
our loaded htlc table. To keep things tidy, we shouldn't notify the
ledger about these, so we wrap pretty much everything in a flag that
tells us whether or not this is a replay.
There's a very small corner case where dust transactions will get missed
if the node crashes after the htlc has been added to the database but
before we've successfully notified onchaind about it.
Notably, most of the obtrusive updates to onchaind wrappings are due to
the fact that we record dust (ignored outputs) before we receive
confirmation of its confirmation.
Mostly we update existing tests to account for channel balances. In a
few places, new tests were needed as there wasn't an existing pathway
that tested the chain-fees for a few penalty cases
For cheats, we do a little bit of weird accounting. First we 'update'
our on-ledger balance to be the entirety of the channel's balance. Then,
as outputs get resolved, we record the fees and outputs as withdrawals
from this amount.
It's possible that they might successfully 'cheat', in which case we
record those as 'penalty' but debits (not credits).
The previous patch changed the gossip_store, but in a trivial way.
The next patch will implement upgrading, so this is the test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And the percentage of the initial amount, not the constently increasing
one !
Changelog-Fixed: pay: we now respect maxfeepercent, even for tiny amounts.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
The previous implementation was a bit lazy: in particular, since we didn't
remember the disabled plugins, we would load them on rescan.
Changelog-Changed: config: the `plugin-disable` option works even if specified before the plugin is found.
That's more convenient for most callers, which don't need a fmt.
Fixed-by: Darosior <darosior@protonmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is what I expected from plugin_kill, and now all the callers do the
equivalent anywat, it's easy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we now clean up options in startup plugins (that was only
done by dynamic code!), and now they both share the 60 second timeout
instead of 20 seconds for dynamic.
For the dynamic case though, it's 60 seconds to both complete
getmanifest and init, which seems fair.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We modify the slow_init() so it doesn't go too slowly for this test.
This demonstrates a crash, where we currently try to fail a command
multiple times.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This actually passes fine, but it's an interesting case to test.
Fixed-by: Darosior <darosior@protonmail.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Telling `lightningd` to pass a `-datadir` to `bitcoin-cli` so it doesn't go
snooping where it doesn't belong (i.e., the user's home directory and config).
Changelog-None
Suggested-by: Simon Vrouwe <@SimonVrouwe>
Signed-off-by: Christian Decker <@cdecker>
I noticed the following in logs for tests/test_connection.py::test_feerate_stress:
```
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Failing HTLC 18446744073709551615 due to peer death
DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: local_routing_failure: 8194 (WIRE_TEMPORARY_NODE_FAILURE)
```
This is because it reports the (transient) node_failure error, because
our channel_failure message is incomplete. Fix this wart up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we don't wait for close tx to reach mempool, it might not get to
depth 100, and we don't get 'onchaind complete, forgetting peer'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We didn't wait until l2 processed the final state of HTLC #2, so
it might not include it when it drops onchain, leading to us only
getting 3 (not 4) sendrawtx calls.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
They were looking for specific amounts which proved to be rather flaky. Now
they look for specific outputs being available in the `listfunds` result after
everything was settled.
Christian Decker
niftynei
Rusty Russell
Antoine Poinsot
rbndg