This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a low-level interface now, expecting you to build your own TLVs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: @valentinewallace
Update TOR.md
Update tor install to represent current systemd syntax for enabling and starting a new system service
Corrected a typo. After tor is installed to refresh /etc/tor/torrc config changes the command should be 'sudo systemctl restart tor' not 'sudo systemctl start tor'
Having a list of very targeted suppressions allows us to still run the
majority of tests with valgrind checking, and not fail when Rust does
some trickery. This is for example the case with `std::sync::Once`
which uses `num_procs` calling out to the cgroups subsystem, sometimes
with a null path.
Suggested-by: Rusty Russell <@rustyrussell>
Useful for accounting for missed/historical channel opens, to figure out
what the actual sat contribution from each peer is at a utxo level
Changelog-Added: JSONRPC: `listpeers` now includes a `pushed_msat` value. For leased channels, is the total lease_fee.
Changelog-Experimental: option `--lease-fee-base-msat` renamed to `--lease-fee-base-sat`
Changelog-Experimental: option `--lease-fee-base-msat` deprecated and will be removed next release
All build flags and (experimental) options make it hard to find
out what features are supported or enabled.
And the undocumented `--list-features-only`, does not account for all
our featurebits, for example bit 55 (keysend).
Changelog-Added: JSON-RPC: `getinfo` result now includes `our_features` (bits) for various Bolt #9 contexts
I've tried automatically parsing the docs, and these inconsistencies made it harder to do that.
(I tried to do that for a project which I can't share yet, I'm not sure if it'll even work).
The blockheight is zero though, since these aren't included in a block
yet.
We also don't issue an 'external' deposit event if we can tell that the
address you're sending to actually belongs to our wallet (we'll issue a
deposit event when it gets included in a block)
If a coin move concerns an external account, it's really useful to know
which 'internal' account initiated the transfer.
We're about to add a notification for withdrawals, so we can use this to
track wallet pushes to outside addresses
Changelog-Added: JSONRPC: `coin_movement` to 'external' accounts now include an 'originating_account' field
Fire off a snapshot of current account balances (node wallet + every
'active' channel) after we've caught up to the chain tip for the *first*
time (in other words, on start).
We record the amount of fees collected for a routed payment. For
simplicity's sake on the data agg side, we record the fee payment on
*BOTH* the incoming htlc and the outgoing htlc. Note that this results
in double counting if you add up the fees from both an in-routed and
out-routed payment.
Get rid of the 'movement_idx', since we replay events now.
Since we're removing a field from the 'coin_movement' event emission, we
bump the version type.
Changelog-Updated: `coin_movements` events have been revamped and are now on version 2.
Don't do this on every build, it takes 4 seconds. And split it
into individual targets, so make can parallelize (1.6 seconds here).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4785Fixes: #4883
Changelog-Changed: Plugins: `shutdown` notification is now send when lightningd is almost completely shutdown, RPC calls then fail with error code -5.
This include the following commits:
- review 1/2: move from tab to space, and remove the exp. prop from doc;
- review 2/2: remove experimental features;
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
I noticed that `wallet/db_postgres.c` never actually calls `db_changes_add`.
PostgreSQL arguably has a better replication system (a PostgreSQL cluster)
than what `db_write` hook can offer, so rather than make `db_write` work on
PostgreSQL, just document that it does not actually work there.
ChangeLog-none
ChangeLog-Added: With the `sqlite3://` scheme for `--wallet` option, you can now specify a second file path for real-time database backup by separating it from the main file path with a `:` character.
autotor is older, but statictor is better. Your options are really
"use HiddenServiceDir in torrc" vs "use statictor", with the issue
that statictor requires you to configure Tor for control access by
c-lightning.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
mrkd doesn't like non-ASCII characters in ubuntu:18.04, used for
repro-builds. This is the easiest way to sidestep this issue until we
deprecate the old ubuntu version.
To reduce the surface area of amount of a channel balance that can be
eaten up as htlc dust, we introduce a new config
'--max-dust-htlc-exposure-msat', which sets the max amount that any
channel's balance can be added as dust
Changelog-Added: config: new option --max-dust-htlc-exposure-msat, which limits the total amount of sats to be allowed as dust on a channel
It's probably not worth fixing for the other daemons.
Changelog-Changed: JSON-RPC: `ping` now only works if we have a channel with the peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the now-removed chains field, and in deprecated mode, we set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `chains` in invoice_request and invoice is deprecated, `chain` is used instead.
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
This adds a new hook: onion_message_ourpath for when we know a message
came in via a blinded path we created. The onion_message_blinded hook
is now called for all other messages, since all messages are now
blinded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required for the setuptools_scm package to correctly identify
the root of the git repository when installing from the
requirements.txt file in the root. It'd otherwise copy the source
directory, which doesn't yet include the version metadata, into a
separate directory and the building from there, which breaks the
git lookup.
`in-tree-build` is the future default, so we'll eventually be able to
strip that option again. See [1] for details.
[1] https://github.com/pypa/pip/issues/7555
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
By popular merge-hell demand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Build: Python is now required to build, as generated files are no longer checked into the repository.
Suggested by @cdecker
P.S: Also this include an API refactoring from my previous solution, also this it is suggested by @cdecker.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-Added: Support to listpays the status parameter to filter the payments by status.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
That was quick!
We remove the 50% test, since the default is now to use quickclose.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now perform quick-close if the peer supports it.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Shows the dangers of "additionalProperties": true. We didn't have an else
clause, so our incorrect (and, with DF, incomplete!) schema was accepted.
I despair of getting anyone else to write a decent schema with these
semantics :(
Changelog-Fixed: doc: listnodes fields now correctly documented.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
After some discussion with @shesek, and my own usage, we agreed that
a more comprehensive interface, which explicitly supports grouping,
is desirable.
Thus keys are now arrays, with the semantic that a key is either a
parent or has a value, never both.
For convenience in the JSON schema, we always return them as arrays,
though we accept simple strings as arguments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We add a generation counter, and allow update or del conditional
on a given generation.
Formalizes error codes, too, since we have more now.
Suggested-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `datastore`, `deldatastore` and `listdatastore` for plugins to store simple persistent key/value data.
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
It subsumes `decodepay`, and it's nicer if people can just assume it's
available at all times.
Changelog-Added: JSON-RPC: `decode` now available without `experimental-offers`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out we didn't actually test this at all, and next commit does :(
offer_status_in_db: 4 is invalid
lightningd: FATAL SIGNAL 6 (version v0.10.0-459-g48fbd45-modded)
0x5608cd360855 send_backtrace
common/daemon.c:39
0x5608cd3608ff crashdump
common/daemon.c:52
0x7f9af1dae20f ???
???:0
0x7f9af1dae18b ???
???:0
0x7f9af1d8d858 ???
???:0
0x5608cd30a47e fatal
lightningd/log.c:819
0x5608cd3430c5 offer_status_in_db
wallet/wallet.h:1424
0x5608cd34f1f3 wallet_offer_disable
wallet/wallet.c:4494
0x5608cd33ae2e json_disableoffer
lightningd/offer.c:256
0x5608cd3038fc command_exec
lightningd/jsonrpc.c:643
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@shesek points out that we called this field created_at in bolt11 decode,
which makes more sense anyway.
Changelog-EXPERIMENTAL: bolt12 decode `timestamp` field deprecated in favor of new name `created_at`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Documentation for the funderupdate command on the funder plugin.
Realized we were missing the "leases_only" in the output; also adds
'_msat' to msat denominated outputs so they're parsed correctly by our
python bindings (also matches our naming conventions)
Changelog-EXPERIMENTAL: funder: `funderupdate` command to view and update params for contributing our wallet funds to v2 channel openings. Provides params for enabling `option_will_fund`.
We need to know what the lease we're expecting is. To do this
we pass around the hex encoded portion of the wire format.
We can use this passed in expected lease rates to confirm that the peer
is, in fact, using the same rates as what we have currently.
Changelog-Added: JSON-RPC: fundchannel, multifundchannel, and openchannel_init now accept a 'compact_lease' for any requested funds
By default, we won't close a channel that we leased to a peer.
You can override this with the `force_lease_closed` flag.
Changelog-Added: JSON-RPC: close now has parameter to force close a leased channel (option_will_fund)
Useful for parsing a passed in feerate before calling lightningd with
it, e.g. when you need to know what the feerate is for a fundpsbt before
calling fundpsbt
Changelog-Added: JSON-RPC: new command `parsefeerate` which takes a feerate string and returns the calculated perkw/perkb
When a request comes through, we forward it over to the funder who
uses the currently set policy to figure out how to handle it.
Includes small update to the policy engine which decides whether or not
to fund a request.
Changelog-Experimental: Plugins: `openchannel2` hook now includes optional fields for a channel lease request
Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This makes it easier to access (rather than decoding bolt11).
Changelog-Added: JSON-RPC: `invoice` now outputs explicit `payment_secret` it its own field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Useful for regtest and testnet. Sure, you shouldn't use this on mainnet,
but I haven't restricted it because our users are usually pretty clever.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #1806
Changelog-Added: config: `force_feerates` option to allow overriding feerate estimates (mainly for regtest).
We don't do it for sendinvoice (yet?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` can take a payer note, and `listinvoice` will show the payer_notes received.
As per latest spec revision.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: BOLT12 offers can now be unsigned, for really short QR codes.
This also adds a `fetchinvoice-noconnect` option to suppress it too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` and `sendinvoice` will connect directly if they can't find an onionmessage route.
Fixes: #4624
And add the local_offer_id to the schemas too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSONRPC: `listoffers` now shows `local_offer_id` when listing all offers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: doc: Epic documentation rewrite: each now lists complete and accurate JSON output, tested against testsuite.
1. listpeers has a deprecated `"closer": null`, which we need
to handle in the schema, while trying not to damage our
documentation too much.
2. Don't print a condition if there are no fields to print.
3. Allow a special "untyped" marker for multifundchannel which returns
arbitrary JSON in a field.
4. Allow a single field return (for 'stop').
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we have conditional fields, we often set `additionalProperties` `true`
at the top-level, but then we have to make sure to cover all the possible
combinations in conditionals, so unintended additions don't appear.
This revealed missing fields in delinvoice, for example.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This turned into a more extensive cleanup than intended. The previous
warnings were overlapping and confusing, especially now MPP is the norm.
*warning_capacity* is now the "even under best circumstances, we don't
have enough incoming capacity", which is really what
warning_mpp_capacity was trying to say (no longer printed).
*warning_offline* and *warning_deadends* are only given if adding such
peers would have helped give capacity (i.e. not if *warning_capacity*
is set). The new *warning_private_unused* tells you that we would
have sufficient capacity, but we refused to expose private channels.
The test cases have been enhanced to cover the new warnings.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now gives `warning_private_unused` if unused unannounced channels could have provided sufficient capacity.
Changelog-Changed: JSON-RPC: `invoice` warnings are now better defined, and `warning_mpp_capacity` is no longer included (since `warning_capacity` covers that).
Prior to this, sending a v1 address (or, in fact, any random crap!)
would cause the unsupporting node to unilaterally close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Aaron Dewes
Jules Comte
GoofyAF
Michael Schmoock
Vincenzo Palazzo
Christian Decker
niftynei
Simon Vrouwe
Tim W
Dustin Dettmer
Jan Sarenik
Andrew Toth
ZmnSCPxj jxPCSnmZ
jerzybrzoska
William Casarin
Alex
LightningHelper
nathanael
fiatjaf