Using a 'feestep' is more restrictive than you'd want, instead we
enforce that the next feerate must be at least 1/64th more than the
last, but put no upper limit on it
Includes update to lnprototest changes
Contributed-By: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Changelog-EXPERIMENTAL: Protocol: Replaces init_rbf's `fee_step` for RBF of v2 opens with `funding_feerate_perkw`, breaking change
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This supports reestablish on a closed channel: we tell channeld to
respond to the reestablish message appropriately, then close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
If the peer is offline when we see the funding txid, we don't actually
update the channel's info. Here, we move it up to where the scid is set,
so that we always update the channel's funding_txid to the correct
(mined) information.
Trying to put all the disconnect logic into the same path was a dumb
idea. If you asked to reconnect but passed in an 'unsaved' channel, we
would not call the 'reconnect' code.
Instead, we make a differentiation between "unsaved" channels
(ones that we haven't received commitment tx for) and handle the
disconnect for these separate from where we want to do a reconnect.
We were freeing the payload, which is then subsequently freed by the
plugin_hook caller. Whoops.
Now we pass through to the callback function and just clean up neatly.
------------------------------- Valgrind errors --------------------------------
Valgrind error file: valgrind-errors.406602
==406602== Invalid read of size 8
==406602== at 0x12AC93: openchannel2_hook_cb (dual_open_control.c:669)
==406602== by 0x12AF0A: openchannel2_hook_deserialize (dual_open_control.c:721)
==406602== by 0x16EF0E: plugin_hook_callback (plugin_hook.c:186)
==406602== by 0x169746: plugin_response_handle (plugin.c:514)
==406602== by 0x169959: plugin_read_json_one (plugin.c:620)
==406602== by 0x169B23: plugin_read_json (plugin.c:665)
==406602== by 0x1F4076: next_plan (io.c:59)
==406602== by 0x1F4C5B: do_plan (io.c:407)
==406602== by 0x1F4C9D: io_ready (io.c:417)
==406602== by 0x1F6F35: io_loop (poll.c:445)
==406602== by 0x13D48D: io_loop_with_timers (io_loop_with_timers.c:24)
==406602== by 0x143388: main (lightningd.c:1111)
==406602== Address 0x75e7418 is 56 bytes inside a block of size 3,520 free'd
==406602== at 0x483CA3F: free (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==406602== by 0x204FB0: del_tree (tal.c:421)
==406602== by 0x20527E: tal_free (tal.c:486)
==406602== by 0x122D68: delete_channel (channel.c:124)
==406602== by 0x129291: channel_disconnect (dual_open_control.c:63)
==406602== by 0x129364: channel_close_conn (dual_open_control.c:82)
==406602== by 0x131CF6: peer_please_disconnect (connect_control.c:304)
==406602== by 0x131DEB: connectd_msg (connect_control.c:326)
==406602== by 0x172023: sd_msg_read (subd.c:509)
==406602== by 0x1F4076: next_plan (io.c:59)
==406602== by 0x1F4C5B: do_plan (io.c:407)
==406602== by 0x1F4C9D: io_ready (io.c:417)
==406602== Block was alloc'd at
==406602== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==406602== by 0x204A39: allocate (tal.c:250)
==406602== by 0x204FFA: tal_alloc_ (tal.c:428)
==406602== by 0x123165: new_unsaved_channel (channel.c:209)
==406602== by 0x130D34: peer_start_dualopend (dual_open_control.c:2985)
==406602== by 0x15BD2A: peer_connected_hook_final (peer_control.c:1105)
==406602== by 0x16F2E5: plugin_hook_call_ (plugin_hook.c:275)
==406602== by 0x15BF5C: plugin_hook_call_peer_connected (peer_control.c:1155)
==406602== by 0x15C16C: peer_connected (peer_control.c:1208)
==406602== by 0x131E3B: connectd_msg (connect_control.c:332)
==406602== by 0x172023: sd_msg_read (subd.c:509)
==406602== by 0x171842: read_fds (subd.c:310)
The main change which affects us is that 2016 blocks to forget a channel
is a fixed number in the spec; we make this clear by renaming the
(developer-only) max_funding_unconfirmed to dev_max_funding_unconfirmed
and making it compile DEVELOPER only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
There are perfectly valid reasons for us to not have a command on return
(something went boom while sending them our sigs and we've now gotten
their sigs during a reconnect and subsequently broadcast the tx)
This can result in us logging a warning if we've 1) dropped their sigs
response, 2) only us (the opener) added inputs, 3) and we broadcast on
their reconnect (when they retransmit their sigs)
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
The receiving node: ...
- MUST fail the channel if:
- the `witness_stack` weight lowers the effective `feerate`
below the agreed upon transaction `feerate`
We consolidate to the latest/singular RFC patch for dual-funding, so
there's just a single patchfile for the change. Plus we move back to the
opener setting the desired feerate, the accepter merely declines to
participate if they disagree with the set rate.
We were getting a memleak error that the open_attempt isnt' being
cleaned up in test_rbf_reconnect_tx_construct. I had some trouble
reproducing it, so I removed the reliance on using `tmpctx` to clean it
up and was more surgical about cleaning it up inline.
We move over to the new "warning" paradigm, instead of using
an "rbf_fail" message.
Every failure is either a warning or an error; on warnings we
hang up and reconnect later, effectively resetting the state.
We're *mostly* set up for both sides doing RBF, except that it reverses
the callback flow (using the plugin vs RPC calls) and we're not
currently smart enough to flip between them gracefully
We're going to move over to "unsaved channels" instead of using a
separate "uncommitted_channel" struct. This means a peer might have a
channel that's not saved to the database yet in its channel list
We need to make sure that there's at least one input that's represented
in every single RBF-attempt for this channel, to prevent "parallel"
subsequent RBFs from succeeding/opening (the multi-channel backdoor?!)
When the funding tx reaches depth, update the channel's data to the
"correct" funding transaction info from inflights (if necessary).
This will be necessary if:
- the transaction has been successfully RBF'd and
- the lesser fee transaction is the one successfully mined, OR
- the channel is in the process of being RBF'd
Nit: The underscore in "openchannel_hook" is wrong, bcause the name of
the hook is just "openchannel". The "_hook" implied this to be part of
the name.
Changelog-None
We weren't sending a channel_open notification for dual-funded channels.
This is only sent for the 'accepter' side. We send it as soon as both
funding_tx sigs have been exchanged, even though it's possible the
funding transaction might be published without this having been the case.
Since we fail the channel if this happens, only notifying for good/valid
channels reaching the broadcast state is the right way to handle this.
Let plugins know when a channel open has failed.
We need to notify accepters now too, so we remove the check on who's
funding the channel before sending the 'failed' message from
dualopend->master.
We already know what the channel id is, we should go ahead and pass it
on to any listening plugins -- this makes clean up easier/possible
if a open fails early on and we've got reserved utxos.
When we're the opener, we get the upfront shutdown scriptpubkey (if
there is one) from the `close_to` param of `openchannel_init`.
We were passing it through dualopend, but we need to break the update
chain so that our test_option_upfront_shutdown_script test works (same
as on the openingd flow.)
Prior to this, all reconnect logic lived in channeld. If you
disconnected before we finished building a funding transaction, that was
no big deal. Now, however, we're waiting for the funding to lock in in
dualopend, instead of handing straight to channeld to wait.
So we need a way to restart dualopend.
We delegate the decision about what to do about 'out of bound' feerates
to the plugin (if one exists), however in the case that the plugin
doesnt exist or doesnt want to figure it out, we default to using the
'best' as their intended feerate, and rejecting if it's out of bounds.
We need to know if they've sent us their sigs message yet. Ideally, we'd
be able to check the 'finalness' of the PSBT, however if the peer
doesn't have any inputs to the channel this doesn't work.
Back in the days before dual-funding, the `channel` struct on subd was
only every one type per daemon (either struct channel or struct
uncommitted_channel)
The RBF requirement on dualopend means that dualopend's channel,
however, can now be two different things -- either channel or
uncommitted_channel.
To track the difference/disambiguate, we now track the channel type on a
flag on the subd. It gets updated when we swap out the channel.
niftynei
Rusty Russell
Christian Decker
Michael Schmoock