Rather than reaching into data structures, let them register their own
callbacks. This avoids us having to expose "memleak_remove_xxx"
functions, and call them manually.
Under the hood, this is done by having a specially-named tal child of
the thing we want to assist, containing the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`make update-mocks` is usually run in DEVELOPER mode, but then it includes
definitions for functions which aren't declared in non-DEVELOPER mode.
We hacked this in a few places, but it's fragile, and worst, now we
have EXPERIMENTAL_FEATURES as well, it's complex.
Instead, declare developer-only functions (but don't define them).
This is a bit more awkward if you accidentally use one in
non-DEVELOPER code (link error rather than compile error), but makes
autogenerating test mocks much easier.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fortunately, again, only happens with EXPERIMENTAL_FEATURES.
If the query causes us not to actually send anything, we won't
get called again. This can validly happen if they only asked for
the node_announcements, for example.
(Found by protocol tests).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our "are we finished?" logic was wrong: it tested if there are no more
node_announcements, but it's possible that there were no node_announcements
for either end of the channel whose information we sent.
This is actually quite unusual on the real network: looking at mainnet
statis from last May, 4301 of 4337 nodes have node_announcements.
However, with query flags it's much more likely, since they might not
ask for node announcements at all.
(Found by gossip protocol tests)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These both allow us to reproduce the test vectors in the next patch. But
using Z_DEFAULT_COMPRESSION is a reasonable idea anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make the TLV element a simple array. This is a bit neater, in fact, and
makes the test vectors in that 557 PR work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In fact, we always generate them, we only send them if asked. And we set
the flags to 0 if not --enable-experimental-features, so we never send in
that case.
Generating checksums involves pulling the channel_update from the
gossip_store, which is suboptimal: there's a FIXME to store the
checksum in memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to use the for gossip extended info too, which *don't* put
the encoding byte at the beginning of the data stream. So this removes
some "scids" from function names and separates out the "prepend a byte"
case from the "external encoding_type" case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These indicate what fields we are to return. If there's now TLV, or we
haven't got --enable-experimental-features, it's set to all 1s so behaviour
is unchanged.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We ignored this before, which meant that the DEVELOPER-mode check that we
delete the correct record didn't check that it wasn't already deleted.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always know the length, so we don't need it. It causes much extra work
when we want to delete a record, which I suspect may cause issues amongst
some users who've been seeing gossip_store corruption.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We added a random channel to the list, but we can just free it immediately
(since traversal of a uintmap isn't altered by deletion).
This was introduced in d1f43d993a where we explicitly call free_chan
rather than relying on destructors.
Fixes: #2837
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
==1503== Use of uninitialised value of size 8
==1503== at 0x566786B: _itoa_word (_itoa.c:179)
==1503== by 0x566AF0D: vfprintf (vfprintf.c:1642)
==1503== by 0x569790F: vsnprintf (vsnprintf.c:114)
==1503== by 0x156CCB: do_vfmt (str.c:66)
==1503== by 0x156DB1: tal_vfmt_ (str.c:92)
==1503== by 0x1289CD: status_vfmt (status.c:141)
==1503== by 0x128AAC: status_fmt (status.c:151)
==1503== by 0x118E05: route_prune (routing.c:2495)
==1503== by 0x11DE2D: gossip_refresh_network (gossipd.c:1997)
==1503== by 0x1292B8: timer_expired (timeout.c:39)
==1503== by 0x12088C: main (gossipd.c:3075)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
updates the bolt version to 6639cef095a2ecc7b8f0c48c6e7f2f906fbfbc58.
this requires us to use the new bolt parser at generate-bolt.py
and updates to all of the type specifications (ie. from u8 -> byte)
Rewriting the gossip_store is much more trivial when we don't have
any pointers into it, so add some simple offline compaction code
and disable the automatic compaction code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The crashes in #2750 are mostly caused by us trying to partially truncate
the store. The simplest fix for release is to discard the whole thing if
we detect a problem.
This is a workaround: it'd be far nicer to try to recover.
Fixes: #2750
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We hit the timestamp assert on #2750; it shouldn't happen, but crashing
doesn't leave much information.
Reported-by: @m-schmook
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If something went wrong and there was an old one, we were
appending to it!
Reported-by: @SimonVrouwe
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We might have channel_announcements which have no channel_update: normally
these don't get written into the store until there is one, but if the
store was truncated it can happen. We then get upset on compaction, since
we don't have an in-memory representation of the channel_announcement.
Similarly, we leave the node_announcement pending until after that
channel_announcement, leading to a similar case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can't continue, since we've moved the indexes. We'll just crash
anyway, as seen from bugs #2742 and #2743.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We catch node_announcements for nodes where we haven't finished
analyzing the channel_announcement yet (either because we're still
checking UTXO, or in this case, because we're waiting for a channel_update).
But we reference count the pending_node_announce, so if we have
multiple channels pending, we might try to insert it twice. Clear it
so this doesn't happen.
There's a second bug where we continue to catch node_announcements
until *all* the channel_announcements are no longer pending; this is fixed
by removing it from the map.
Fixes: #2735
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We seek a certain number of peers at each level of gossip; 3 "flood"
if we're missing gossip, 2 at 24 hours past to catch recent gossip, and
8 with current gossip. The rest are given a filter which causes them
not to gossip to us at all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The first sign that we're missing gossip is that we get a channel_update
for an unknown channel. The peer might be wrong (or lying), but if it turns
out to be a real channel, we were definitely missing something.
This patch does two things: queries when we get an unknown channel_update,
and then notes that a channel_announcement was from such an update when
it's finally processed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, we'll need to know the short_channel_id if a
channel_update is unknown (implies we're missing a channel), and whether
processing a pending channel_announcement was successful (implies that
the channel was real).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Up until now we only generated these in dev mode for testing. Hoist
into common code, turn counter into a flag (we're only allowed one!)
and note if query is internal or not.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I decided to try a faster implementation, only to find our crc32c was
not correct! Ouch.
I removed the crc32c functions from ccan/crc, and added a new crc32c
module which has the Mark Adler x86-64-optimized variants.
We bump gossip_store version again, since csums have changed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means there's now a semantic difference between the default `fromid`
and setting `fromid` explicitly to our own node_id. In the default case,
it means we don't charge ourselves fees on the route.
This means we can spend the full channel balance.
We still want to consider the pricing of local channels, however:
there's a *reason* to discount one over another, and that is to bias
things. So we add the first-hop fee to the *risk* value instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
darosior
Rusty Russell
ZmnSCPxj
lisa neigut