Commit a418615b7f ("rpc: adds
num_channels to listpeers") broke the sql tests. Turns out, no
openchannel v2 tests are run in CI!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It works for the trivial case, where groupid and partid are the same,
but silently deletes nothing in the other cases (or worse, deletes the
wrong entry!).
See: #5835
Changelog-Fixed: `delpay`: actually delete the specified payment (mainly found by `autoclean`).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we had two things to clean, we fired off two requests (eg.
listforwards and listinvoices) and both marked the timer as finished,
triggering an assert.
We already have a refcount for outstanding requests to avoid this
for e.g. outstanding del commands, so use it here too!
```
Jan 19 19:20:00 lightningd[748044]: autoclean: plugins/libplugin.c:445: timer_complete: Assertion `p->in_timer > 0' failed.
Jan 19 19:20:00 lightningd[748044]: autoclean: FATAL SIGNAL 6 (version v22.11.1)
Jan 19 19:20:00 lightningd[748044]: 0x562c388136e4 send_backtrace
Jan 19 19:20:00 lightningd[748044]: common/daemon.c:33
Jan 19 19:20:00 lightningd[748044]: 0x562c3881376c crashdump
Jan 19 19:20:00 lightningd[748044]: common/daemon.c:46
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0898d5f ???
Jan 19 19:20:00 lightningd[748044]: ./signal/../sysdeps/unix/sysv/linux/x86_64/sigaction.c:0
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0898ce1 __GI_raise
Jan 19 19:20:00 lightningd[748044]: ../sysdeps/unix/sysv/linux/raise.c:51
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0882536 __GI_abort
Jan 19 19:20:00 lightningd[748044]: ./stdlib/abort.c:79
Jan 19 19:20:00 lightningd[748044]: 0x7f26d088240e __assert_fail_base
Jan 19 19:20:00 lightningd[748044]: ./assert/assert.c:92
Jan 19 19:20:00 lightningd[748044]: 0x7f26d0891661 __GI___assert_fail
Jan 19 19:20:00 lightningd[748044]: ./assert/assert.c:101
Jan 19 19:20:00 lightningd[748044]: 0x562c3880355d timer_complete
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:445
Jan 19 19:20:00 lightningd[748044]: 0x562c38800b54 clean_finished
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:122
Jan 19 19:20:00 lightningd[748044]: 0x562c388010ed clean_finished_one
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:132
Jan 19 19:20:00 lightningd[748044]: 0x562c388011b6 del_done
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:149
Jan 19 19:20:00 lightningd[748044]: 0x562c388058b5 handle_rpc_reply
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:768
Jan 19 19:20:00 lightningd[748044]: 0x562c38805a39 rpc_read_response_one
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:944
Jan 19 19:20:00 lightningd[748044]: 0x562c38805ad7 rpc_conn_read_response
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:968
Jan 19 19:20:00 lightningd[748044]: 0x562c38876b60 next_plan
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/io.c:59
Jan 19 19:20:00 lightningd[748044]: 0x562c38876fe7 do_plan
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/io.c:407
Jan 19 19:20:00 lightningd[748044]: 0x562c38877080 io_ready
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/io.c:417
Jan 19 19:20:00 lightningd[748044]: 0x562c3887823c io_loop
Jan 19 19:20:00 lightningd[748044]: ccan/ccan/io/poll.c:453
Jan 19 19:20:00 lightningd[748044]: 0x562c38805d11 plugin_main
Jan 19 19:20:00 lightningd[748044]: plugins/libplugin.c:1801
Jan 19 19:20:00 lightningd[748044]: 0x562c38801c7a main
Jan 19 19:20:00 lightningd[748044]: plugins/autoclean.c:613
```
Fixes: #5912
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When doing some plugin related work, I discovered that the datastore API
has two issues:
- Error messages on startup of plugins init method when the datastore is
still completely empty: "Parsing '{datastore:[0:': token has no index 0: []"
- Data is escaped but not unwrapped again when sending and getting from
the API.
[ Removed xfail, it now passes! --RR ]
Closes: #5990
Since it's not spec-final yet (hell, it's not even properly specified
yet!) we need to put it behind an experimental flag.
Unfortunately, we don't have support for doing this in a plugin; a
plugin must present features before parsing options. So we need to do
it in core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Though there's already a `createinvoice` command, there are usecases where a
user may want to sign an invoice that they don't yet have the preimage to. For
example, they may have an htlc_accepted plugin that pays to obtain the preimage
from someone else and returns a `{ "result": "resolve", ... }`.
This RPC command addresses this usecase without overly complicating the
semantics of the existing `createinvoice` command.
Changelog-Added: JSON-RPC: `signinvoice` new command to sign BOLT11
invoices.
We might be disconnected, but the subd isn't dead yet:
```
> assert out[0] == '# peer is offline, will negotiate once they reconnect (5 seconds before unilateral close).'
E AssertionError: assert '# Timed out, forcing close.' == ('# peer is offline, will negotiate once they reconnect (5 seconds before '\n 'unilateral close).')
E - # peer is offline, will negotiate once they reconnect (5 seconds before unilateral close).
E + # Timed out, forcing close.
tests/test_closing.py:164: AssertionError
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
make the number of blocks mined father away from the cltv timeout
from borked/flakey test run:
lightningd-3 2023-01-26T21:45:19.261Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#2: billboard perm: Received error channel 27a4a4dd880e86
1e390517de3e786a237c5ad1f00faab277382664e76b5c3870: Fulfilled HTLC 0 SENT_REMOVE_COMMIT cltv 116 hit deadline
When a channel open fails, we use tx-abort instead of warning/error.
This means that the peer won't disconnect! And instead when a new
message arrives, we'll need to rebuild the dualopend subd (if missing).
Makes opens a bit easer to retry (no reconnect needed), as well as keeps
the connection alive for other channels we may have with that peer.
Changelog-Changed: Experimental-Dual-Fund: open failures don't disconnect, but instead fail the opening process
Dropping the connection is bad behavior on an openchannel failure,
especially given that there might be other channels currently connected.
We should maintain the connection but close out the dualopend
daemon for that attempt.
This test partially documents the behaivor, but fails
Changelog-None
v2 opens require you to use native segwit inputs
Changelog-Added: JSONRPC: `upgradewallet` command, sweeps all p2sh-wrapped outputs to a native segwit output
1. Allow 'any' as an option to zeroconf-selective.py plugin so we can use
it in line_graph where we don't know ids yet.
2. Use modern helpers like line_graph and remove debugging statement.
3. Don't use listchannels(): it's true that it shows local channels as well,
but that's a quirk I'd like to remove.
4. Make flake8 happy.
5. Rename to be more specific now it's a more narrow test.
I manually tested that the test still failed with the fixes removed, too,
so it is still the same test!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we only specify the node_id, we get the "first" channel.
Closes: #5803
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: `pay` uses the correct local channel for payments when there are multiple available (not just always the first!)
We fixed most of them. Now hone in to the case which fails: `pay`
when it needs to use the direct zero-conf channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Modifications from issue #5803 to work here:
1. import json
2. Add xfail
3. Increase channel sizes by 10x so we can open them
4. Fix plugin path
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can actually catch l2 with HTLCs still closing and mine blocks,
then it force closes due to HTLC timeout.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed that our subtables were not being cleaned, despite being "ON
DELETE CASCADE". This is because foreign keys were not enabled, but
then I got foreign key errors: rowid cannot be a foreign key anyway!
So create a real "rowid" column. We want "ON DELETE CASCADE" for
nodes and channels (and other tables in future) where we update
partially.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to check if the key parameter is an empty array in
`listdatastore` as we do assume an array of at least length 1 in
`wallet.c:5306`.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
This *would* be a 1-line change (add it to Makefile) except that we
previously assumed a "list" prefix on commands.
These use the default refreshing, but they could be done better using
the time-range parameters.
Suggested-by: @niftynei
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For now, we ignore every deprecated field, but put in the logic so
that future deprecations will work as expected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This requires us to rename "index" fields, rename fields if we have a
sub-object, and create sub-tables if we have an array, and handle the
fact that some listX commands don't contain array X (listsendpays
contains "payments").
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a core concept in the spec which isn't directly exposed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listchannels` added a `direction` field (0 or 1) as per gossip specification.
Christian Decker
Rusty Russell
Michael Schmoock
adi2011
niftynei
Greg Sanders
Carl Dong
Carl Dong
Peter Neuroth