Update the address and direction as soon as it connects not just when
we're about to make it active: we want this even if we don't have
an active channel, or if the connect hook rejects it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
More efficient to search a known peer than the whole set.
Also, move find_channel_by_id() from channel_control.c into channel.c
where we'd expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Activate means a specific thing now (connectd said something), so avoid
confusing it with this function.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Generally this means converting a lazy "peer_active_channel(peer)" call
into an explicit iteration.
1. notify_feerate_change: call all channels (ignores non-active ones anyway).
2. peer_get_owning_subd remove unused function.
3. peer_connected hook: don't save channel, do lookup and iterate channels.
4. In json_setchannelfee "all" remove useless call to peer_active_channel
since we check state anyway, and iterate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than intuiting whether this is a new channel / active channel,
use the channel_id. This simplifies things and makes them explicit,
and prepares for multiple live channels per peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means lightningd needs to create the temporary one and tell it to
openingd/dualopend, rather than the other way around.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would return success from connect even though the peer was closing;
this is technically correct but fairly undesirable. Better is to pass
every connect attempt to connectd, and have it block if the peer is
exiting (and retry), otherwise tell us it's already connected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
openingd currently holds the connection to idle peers, but we're about
to change that: it will only look after peers which are actively
opening a connection. We can start this process by disconnecting
whenever we have a negotiation failure.
We could stay connected if we wanted to, but that would be up to
connectd to decide. Right now it's easier if we disconnect from any
idle peer once it's been active.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The message from lightningd simply acknowleges that we are allowed to
discard the peer (because no subdaemons are talking to it anymore).
This difference becomes more stark once connectd holds on to idle
peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. The notification should be called every time.
2. channel can never be NULL, since it's tested above.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `connect` notification now called even if we already have a live channel.
We currently intuit this by whether there's a subdaemon owning it.
But we're about to change the rules and allow connectd to hold idle
connections, so we need an explicit flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
We still use the channel hint here (as it's the only option), we just
warn about lack of capacity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to add some, since our internal representations of
htlc_maximum_msat round up, and we need to disable mpp which succeeds
in getting a payment through by splitting.
We also allow dev_routes to suppress invoice routehints altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Based on setchannelfee, but expanded to allow setting max htlc amount (and others
in future?).
The main differences:
1. It doesn't change values which are not specified (that would be hard to
add fields to!)
2. It says exactly what all values are in any potentially changed channels.
Changelog-Added: JSON-RPC: new `setchannel` command generalizes `setchannelfee`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to calculate it ourselves. Unfortunately this needs to
be done in several places, since new_channel() isn't used to fully
create a channel in the case of dual funding :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Things allocated by libwally all get the tal_name "wally_tal",
which cost me a few hours trying to find a leak.
In the case where we're making one of the allocations the parent
of the others (e.g. a wally_psbt), we can do better: supply a name
for the tal_wally_end().
So I add a new tal_wally_end_onto() which does the standard
tal_steal() trick, and also changes the (typechecked!) name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Instead of doing this weird chaining, just call them all at once and
use a reference counter.
To make it simpler, we return the subd_req so we can hang a destructor
off it which decrements after the request is complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For example, if you do:
```
./lightningd/lightningd --network=regtest --experimental-websocket-port=19846
```
Then you're trying to reuse the normal port as the websocket port, but this
only fails at *listen* time, when we activate connectd. Catch this too.
Fixes incorrect fatal() message, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Ken Sedgwick
Michael Schmoock