The newly introduced type is used to determine what the call semantics of the
hook are. We have `single` corresponding to the old behavior, as well as
`chain` which allows multiple plugins to register for the hook, and they are
then called sequentially (if all plugins return `{"result": "continue"}`) or
exit the chain if the hook event was handled.
This is the last venue we need to add custom featurebits to, so we also unmark
the test as xfail.
Changelog-Added: plugin: Plugins can now signal support for experimental protocol extensions by registering featurebits for `node_announcement`s, the connection handshake, and for invoices. For now this is limited to non-dynamic plugins only
The `init_featurebits` are computed at startup, and then cached
indefinitely. They are then used whenever a new `init` handshake is performed.
We could add a new message to push updates to `connectd` whenever a plugin is
added or removed, but that's up for discussion.
Break out a method for canceling a channel that will either
loop through contacting the peer to tell them of the error or
just directly cleans up if the peer is currently disconnected.
restrict fundchannel_cancel usage to only the opener side
Changelog-Changed: Only the opener of a fundchannel can cancel the channel open with fundchannel_cancel
As a separated commit because it was pre-existent (changelog + xfail test).
This also fix a logical problem in lightningd/plugin_control: we were
assuming a plugin started with 'plugin start' but which did not comport
a 'dynamic' entry in its manifest to be dynamic, though it should have
been treated as static.
Changelog-fixed: plugins: Dynamic C plugins can now be managed when lightningd is up
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Changelog-Changed: The hooks `db_write`, `invoice_payment`, and `rpc_command` now accept `{ "result": "continue" }` to mean "do default action", in addition to `true` (`db_write`), `{}` (`invoice_payment`), and `{"continue": true}` (`rpc_command`). The older "default" indicators are now deprecated and are now recognized only if `--deprecated-apis` is set.
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
Using it with a different value to the amount sent causes a crash in 0.8.0,
which is effectively deprecating it, so let's disallow it now.
Changelog-Changed: If the optional `msatoshi` param to sendpay for non-MPP is set, it must be the exact amount sent to the final recipient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We tag them with specific versions when they're experimental,
but do a poor job of cleaning them up (and thus ensuring they're
checked!) afterwards.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Relative plugin paths are not relative to startup (deprecated v0.7.2.1)
Changelog-Removed: Dummy fields in listforwards (deprecated v0.7.2.1)
If the same memory gets reallocated, our "has the tip changed?" test
gets a false negative. This happened for me about one time in 10,
causing tests/test_misc.py::test_funding_reorg_remote_lags to fail.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This shouldn't happen if channeld is working properly, but I'm going to
change that, and this current code means we stop responding at that point
(not every failpath in peer_accepted_htlc() called channel_internal_error).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We asserted that there wouldn't be a raw failcode.
2. We didn't pass the failure information via JSON in this case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We could use sendonion to do this, but it actually takes a different path through
pay, and I wanted to test all of it, so I made a new dev flag.
We currently get upset with the response:
lightningd/pay.c:556: payment_failed: Assertion `!hout->failcode' failed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This solves a couple of issues with the need to synchronously drop the
connection in case we were required to understand what the peer was talking
about while still allowing users to experiment, just not kill connections.
We cannot let users use `sendcustommsg` to inject messages that are handled
internally since it could result in our internal state tracking being borked.
This command injects a custom message into the encrypted transport stream to
the peer, allowing users to build custom protocols on top of c-lightning
without requiring any changes to c-lightning itself.
This is currently in opening_control since that's the only part that has
access to the uncommitted_channel internals. Otherwise it's independent from
the specific daemon.
These messages may be exchanged between the master and any daemon. For now
these are just the daemons that a peer may be attached to at any time since
the first example of this is the custommsg infrastructure.
Fixes: #3192
Changelog-Added: `waitanyinvoice` now supports a `timeout` parameter, which when set will cause the command to fail when the timeout is reached; can set this to 0 to fail immediately if no new invoice has been paid yet.
json_listconfigs() returns in the middle; the name0 is not always freed.
It will be freed later with the response, but our memleak detection doesn't
know that, and Travis caught it:
Global errors:
E - Node /tmp/ltests-5mfrzh5v/test_hsmtool_secret_decryption_1/lightning-1/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:437 (tal_alloc_)",
E "ccan/ccan/tal/tal.c:466 (tal_alloc_arr_)",
E "ccan/ccan/tal/tal.c:794 (tal_dup_)",
E "ccan/ccan/tal/str/str.c:32 (tal_strndup_)",
E "lightningd/options.c:1122 (add_config)",
E "lightningd/options.c:1282 (json_listconfigs)",
E "lightningd/jsonrpc.c:588 (command_exec)",
E "lightningd/jsonrpc.c:679 (rpc_command_hook_callback)",
E "lightningd/plugin_hook.c:123 (plugin_hook_call_)",
E "lightningd/jsonrpc.c:729 (plugin_hook_call_rpc_command)",
E "lightningd/jsonrpc.c:736 (call_rpc_command_hook)",
E "common/timeout.c:39 (timer_expired)",
E "lightningd/io_loop_with_timers.c:32 (io_loop_with_timers)",
E "lightningd/lightningd.c:871 (main)"
E ],
E "label": "lightningd/options.c:1122:char[]",
E "parents": [
E "lightningd/json_stream.c:49:struct json_stream",
E "ccan/ccan/io/io.c:91:struct io_conn",
E "lightningd/lightningd.c:104:struct lightningd"
E ],
E "value": "0x5569ada057a8"
E }
E ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Generally I prefer structures over u8, since the size is enforced at
runtime; and in several places we were doing conversions as the code
using Sphinx does treat struct secret as type of the secret.
Note that passing an array is the same as passing the address, so
changing from 'u8 secret[32]' to 'struct secret secret' means various
'secret' parameters change to '&secret'. Technically, '&secret' also
would have worked before, since '&' is a noop on array, but that's
always seemed a bit weird.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
Add towire_int() and fromwire_int() functions to "(de)serialize"
"int". This will only work as long as both the caller of towire_int()
and the caller of fromwire_int() use the same in-memory representation
of signed integers and have the same sizeof(int).
Changelog-None
Add "peer not connected" and "unknown peer" as error codes, so that
users can check against numeric error codes instead of textual error
messages.
Will ease https://github.com/ElementsProject/lightning/issues/3366
Changelog-None
`wallet_payment_store` would free the `wallet_payment` instance which would
then cause us to reload it from the DB. Instead of doing the store->free->load
dance we now tell `wallet_payment_store` whether it should take ownership and
leave it alone if not.
Passing the payment around instead of referencing it through payment_hash and
partid is a nice side-effect.
`wallet_payment_store` frees the unstored payment after it has stored it, but
we still need that instance for our notifications. This is the smallest
possible fix, but I plan to refactor this out.
Changelog-Changed: plugin: `notify_sendpay_success` and `notify_sendpay_failure` are now always called, even if there is no command waiting on the result.
This lets us do more flexible filtering in the next patch. But it also
keeps some weird logic out of gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This increments the `data_version` upon committing dirty transactions, reads
the last data_version upon startup, and tracks the number in memory in
parallel to the DB (see next commit for rationale).
Changelog-Changed: JSON-RPC: Added a `data_version` field to the `db_write` hook which returns a numeric transaction counter.
it's that time of year (merry xmas!)
enables the ability to push_msat on fundchannel
Changelog-Added: RPC: `fundchannel` and `fundchannel_start` can now accept an optional parameter, `push_msat`, which will gift that amount of satoshis to the peer at channel open.
Thanks to @t-bast, who made this possible by interop testing with Eclair!
Changelog-Added: Protocol: can now send and receive TLV-style onion messages.
Changelog-Added: Protocol: can now send and receive BOLT11 payment_secrets.
Changelog-Added: Protocol: can now receive basic multi-part payments.
Changelog-Added: RPC: low-level commands sendpay and waitsendpay can now be used to manually send multi-part payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise tests for hold_invoice fail on Travis (they use 180 / 2 as
the timeout, and we free it after 70 seconds).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Bastien TEINTURIER <bastien@acinq.fr> writes:
> One thing I noticed but didn't investigate much: after sending the two
> payments, I tried using `waitsendpay` and it reported an error *208*
> (*"Never attempted payment for
> '98ee736d29d860948e436546a88b0cc84f267de8818531b0fdbe6ce3d080f22a'"*).
>
> I was expecting the result to be something like: "payment succeeded for
> that payment hash" (the HTLCs were correctly settled).
Indeed, if you waitsendpay without specifying a partid, you are waiting
for 0, which may not exist. Clarify the error msg.
Reported-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Bastien TEINTURIER <bastien@acinq.fr> writes:
> It looks like the split on c-lightning side is quite limited at the moment:
> the only option is to split a payment in exactly its two halves,
> otherwise I get rejected because of the rule of overpaying more than
> twice the amount?
We only tested exactly two equal-size payments; indeed, our finalhop
test was backwards. We only complain if the final hop pays more than
twice msat (technically, this test is still too loose for mpp: the
spec says we should sum to the exact amount).
Reported-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The invoice_try_pay code now takes a set, rather than a single htlc, but
it's basically the same thing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
AFAICT this only "worked" previously because replay htlc simply failed
them all (no peers are currently connected). With upcoming changes
(foreshadowed by the comment) this is no longer true:
Attempting to prepare a db_stmt outside of a transaction: wallet/invoices.c:373
lightningd: FATAL SIGNAL 6 (version v0.7.3-188-g45b0af4-modded)
0x55b475590a73 send_backtrace
common/daemon.c:41
0x55b475590b1d crashdump
common/daemon.c:54
0x7f16c557b46f ???
???:0
0x7f16c557b3eb ???
???:0
0x7f16c555a898 ???
???:0
0x55b475564c8f fatal
lightningd/log.c:814
0x55b4755c3ed5 db_prepare_v2_
wallet/db.c:605
0x55b4755c76b5 invoices_find_unpaid
wallet/invoices.c:373
0x55b4755ce91c wallet_invoice_find_unpaid
wallet/wallet.c:1990
0x55b47555861f invoice_check_payment
lightningd/invoice.c:257
0x55b475557a7c htlc_add_set
lightningd/htlc_set.c:112
0x55b47557b294 handle_localpay
lightningd/peer_htlcs.c:332
0x55b47557c63c htlc_accepted_hook_callback
lightningd/peer_htlcs.c:857
0x55b475585573 plugin_hook_call_
lightningd/plugin_hook.c:118
0x55b47557c747 plugin_hook_call_htlc_accepted
lightningd/peer_htlcs.c:882
0x55b47557ca3e peer_accepted_htlc
lightningd/peer_htlcs.c:991
0x55b47557ffb9 htlcs_resubmit
lightningd/peer_htlcs.c:2131
0x55b4755620f7 main
lightningd/lightningd.c:801
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This isn't plumbed in yet, but the idea is that every htlc gets put
into a "set" and then we process them once the set is satisfied. For
the !EXPERIMENTAL_FEATURES, the set is simply always size 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now return the same error for various "does not match this
invoice", so it makes sense to encapsulate these checks. We'll also
want to expose this for multi-part payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Explicit #if EXPERIMENTAL_FEATURES check in case we enable them at different
times, but it requires a payment_secret since we put them in the same field.
This incidently stops it working on legacy nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
msatoshi was used to indicate the amount the invoice asked for, but
for parallel sendpay it's required, as it allows our sanity check of
limiting the total payments in flight, ie. it becomes
'total_msat'.
There's a special case for sendonion, which always tells us the value is 0.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently refuse a payment if one is already in flight. For parallel
payments, it's a bit more subtle: we want to refuse if it we already have
the total-amount-of-invoice in flight.
So we get all the current payments, and sum the pending ones.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, we're about to do surgery on the detection-of-previous-payments
logic, and we should not do this in two places.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in preparation for partial payments. For existing payments,
partid is 0 (to match the corresponding payment).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in preparation for partial payments. For existing payments,
partid is 0 (arbitrarity) and total_msat is msatoshi.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Because my node runs under valgrind, it can take quite a while to
sync; nodes tend to disconnect and reconnect if you block too long.
This is particularly problematic since we often update fees: when the
other side sends its commitment_signed we block.
In particular, this triggers the corner case we have where we
update_fee twice, disconnecting each time, and our state machine gets
confused (which is why we never saw this exact corner case before this
change in 0.7.3!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now "raw_payload" is always the complete string (including realm or length
bytes at the front).
This has several effects:
1. We can receive an decrypt an onion which is grossly malformed.
2. We can still hand this to the htlc_accepted hook.
3. We then fail it unless the htlc_accepted accepts it manually.
4. The createonion API now takes the raw payload, and does not know
anything about "style".
The only caveat is that the sphinx code needs to know the payload
length: we have a call for that, which simply tells it to copy the
entire onion (and treat us as the final node) if it's invalid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular:
1. It must redirect to an existing command.
2. It must contain method, params and id.
And update the docs to show the id, which is vital.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to have a static Tor service created from a blob bound to
our node on cmdline
Changelog-added: persistent Tor address support
Changelog-added: allow the Tor inbound service port differ from 9735
Signed-off-by: Saibato <saibato.naga@pm.me>
Add base64 encode/decode to common
We need this to encode the blob for the tor service
Signed-off-by: Saibato <saibato.naga@pm.me>
cppcheck found this:
[lightningd/options.c:1137] -> [lightningd/options.c:1120] -> [lightningd/options.c:1193]: (error) Using pointer to local variable 'buf' that is out of scope.
Indeed, answer can point into buf, which is no longer in scope at the end.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we initiated the payment using an externally generated onion we don't know
what the final hop gets, or even who it is, so we don't display the amount in
these cases. I chose to show `null` instead in order not to break dependees
that rely on the value being there.
If we can't decode the onion, because the onion got corrupted or we used
`sendonion` without specifying the `shared_secrets` used, the best we can do
is tell the caller instead.
This means that c-lightning can now internally decrypt an eventual error
message, and not force the caller to implement the decryption. The main
difficulty was that we now have a new state (channels and nodes not specified,
while shared_secrets are specified) which needed to be handled.
When using `sendonion` with `shared_secrets` we may be able to decode the
onioned error message but we cannot infer which node reported the failure
since we don't know which nodes where involved.
We are breaking with a couple of assumptions, namely that we have the
`path_secrets` to decode the error onion. If this happens we just want it to
error out.
These are useful for the `createonion` JSON-RPC we're going to build next. The
secret is used for the optional `session_key` while the hex-encoded binary is
used for the `assocdata` field to which the onion commits. The latter does not
have a constant size, hence the raw binary conversion.
We were using sleeps to hope we catch the password prompt. This makes the test
flaky. So I added a help text followed by a `fflush` to make sure we catcht he
right moment, instead of guessing. The `fflush` is also useful for debugging
if a user ever pipes the output to a file it'd get buffered and the user would
wait forever. The same applies for automated systems such as `expect` or
`pexpect` based scripts that enter the password on prompt.
This will change the command `listconfigs` output in several ways:
- Deprecated the duplicated "plugin" JSON output by replacing it with
- a "plugins" array with substructures for each plugin with:
- path, name and their options
Changelog-Changed: JSON-RPC: `listconfigs` now structures plugins and include their options
Changelog-Deprecated: JSON-RPC: `listconfigs` duplicated "plugin" paths
We don't set the secret to compulsory (yet!) but put code in for the
future. Meanwhile, if there is a secret, check it is correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In a future version, we will use features to insist that payers
provide the secret. In transition, we may have old invoices which
didn't insist on that, so we need to know this on a per-invoice basis.
Not sure if I got the right syntax for adding an empty blob though!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also pulls in a new onion error (mpp_timeout). We change our
route_step_decode_end() to always return the total_msat and optional
secret.
We check total_amount (to prohibit mpp), but we do nothing with
secret for now other than hand it to the htlc_accepted hook.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Do the same thing '--help' does with them; append `...`.
Valgrind noticed that we weren't NUL-terminarting if answer was over
78 characters.
Changelog-Fixed: JSONRPC: listconfigs appends '...' to truncated config options.
They're already qualified with network name, and there's little point
moving them; it might even be dangerous if multiple are running.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. "conf" can't be specified in a configuration file.
2. "lightning-dir" can't be specified in a configuration file unless the file
was explicitly set with --conf=.
3. "network" options can't be set in a per-network configuration file.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: .lightningd plugins and files moved into <network>/ subdir
Changelog-changed: WARNING: If you don't have a config file, you now may need to specify the network to lightning-cli
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets you have a default, but also a network-specific config.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: `config` and <network>/`config` read by default.
lightning-cli is going to need to know what network we're on, so
it will need to parse the config files. Move the code which does
the initial bootstrap parsing into common, as well as the config
file parsing core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With coming changes, this will segfault if we access it when param
code is trying to get usage from functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This function ensures we have all the infos we need to continue if the
htlc_accepted hook tells us to. It also enforces well-formedness of the TLV
payload if we have a TLV payload.
Suggested-by: List Neigut <@niftynei>
Signed-off-by: Christian Decker <@cdecker>
We wire in the code-generated function, which removes the upfront validation
and add the validation back after the `htlc_accepted` hook returns. If a
plugin wanted to handle the onion in a special way it'll not have told us to
just continue.
Rounds out the application of `upfront_shutdown_script`, allowing
an accepting node to specify a close_to address.
Prior to this, only the opening node could specify one.
Changelog-Added: Plugins: Allow the 'accepter' to specify an upfront_shutdown_script for a channel via a `close_to` field in the openchannel hook result
This leads to all sorts of problems; in particular it's incredibly
slow (days, weeks!) if bitcoind is a long way back. This also changes
the behaviour of a rescan argument referring to a future block: we will
also refuse to start in that case, which I think is the correct behavior.
We already ignore bitcoind if it goes backwards while we're running.
Also cover a false positive memleak.
Changelog-Fixed: If bitcoind goes backwards (e.g. reindex) refuse to start (unless forced with --rescan).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Spaces just make life a little harder for everyone.
(Plus, fix documentation: it's 'jsonrpc' not 'json' subsystem).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The tal overhead of 5 pointers, the linked list node is 2; and we also
tal'd the string. That's 96 bytes per entry.
Use a simple array instead, though it means more work on deletion
since each log_entry is no longer a tal object.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Don't prune the last 10%.
2. Be more aggressive on pruning IO and DEBUG.
3. Account for skipped entries correctly across multiple prunes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our tests, too, since we don't need a magic option to
enable io logging in subdaemons.
Note that test_bad_onion still takes too long, due to a separate minor
bug, so that's marked and left dev-only for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows finegrained logging control of particular subdaemons or
subsystems.
To do this, we defer setting the logging levels for each log object
until after early argument parsing (since e.g. "bitcoind" log object
is created early).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: log-level can now specify different levels for different subsystems.
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Simply better encapsulation. We still need to expose log_entry, since the
notification hook uses it though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is ignored in subdaemons which are per-peer, but very useful for
multi-peer daemons like connectd and gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
==1310== Conditional jump or move depends on uninitialised value(s)
==1310== at 0x127C7F: io_loop_with_timers (io_loop_with_timers.c:30)
==1310== by 0x14F0E1: plugins_init (plugin.c:1019)
==1310== by 0x12E4B1: main (lightningd.c:694)
==1310==
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Default is legacy. If we have future styles, new strings can be defined,
but for now it's "tlv" or "legacy".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: JSON API: `htlc_accepted` hook has `type` (currently `legacy` or `tlv`) and other fields directly inside `onion`.
Changelog-deprecated: JSON API: `htlc_accepted` hook `per_hop_v0` object deprecated, as is `short_channel_id` for the final hop.
--dev-force-tmp-channel-id flag takes a 64-character hex string
to use as the temporary channel id. Useful for spec tests
[ Fixed crash in non-DEVELOPER mode --RR ]
Changelog-None
If a 'upfront_shutdown_script' was specified, show the address +
scriptpubky in `listpeers`
Changelog-added: JSON API: `listpeers` channels now include `close_to` and `close_to_addr` iff a `close_to` address was specified at channel open
The 'rpc_command' hook allows a plugin to take over any RPC command.
It sends the complete JSONRPC request to the plugin, which can then respond
with :
- {'continue'}: executes the command normally
- {'replace': {a_jsonrpc_request}}: replaces the request made
- {'return': {'result': {}}}: send a custom response
- {'return': {'error': {}}}: send a custom error
This way, a plugin can modify (/reimplement) or restrict the usage of
any of `lightningd`'s commands.
Changelog-Added: Plugin: A new plugin hook, `rpc_command` allows a plugin to take over `lightningd` for any RPC command.
It's less helpful, sure, but it's far better than someone
sending me their output and leaking this information.
Fixes: #3242
Reported-by: @JavierRSobrino
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was wondering why TAGS was missing some functions, and finally
tracked it down: PRINTF_FMT() confuses etags if it's at the start
of a function, and it ignores the rest of the file.
So we put PRINTF_FMT at the end, but that doesn't work for
*definitions*, only *declarations*. So we remove it from definitions
and add gratuitous declarations in the few static places.1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Feerate changes are asymmetric, as they can only be sent by the funder.
For FUNDER, the remote feerate is set when upon send of
commitment_signed, and the local feerate is set on receipt of
revoke_and_ack.
For non-funder, the local feerate is set on receipt of
commitment_signed, and the remote feerate set on send of
revoke_and_ack. In our code, these two happen together.
channeld gets this right, but lightningd ignored the funder/fundee
distinction, and as a result, receipt of a commitment_signed by the
funder altered fees in the database. If there was a reconnection
event or restart, then these (incorrect) values would be used, causing
us to complain about a 'Bad commit_sig signature' and close the
channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A 'Bad commit_sig signature' was reported by @Javier on Telegram and
@DarthCoin. This was between two c-lightning peers, so definitely our fault.
Analysis of this message revealed the signature was using the wrong
feerate. I finally managed to make a test case which triggered this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Takes advantage of upfront-shutdown-script to permit users to
specify the close-to address for a channel at open, by adding
a `close_to` field to `fundchannel_start`.
Note that this only is in effect if `fundchannel_start` returns
with `close_to` set -- otherwise, peer doesn't
support `option_upfront_shutdown_script`.
*If* we know the key has signed something else (as is the case for
channel_announcement) then we can effectively trust the key derivation.
This matches how LND's VerifyMessage works, though in the next patch
we will document it exactly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I wanted to call it verifymessage, but then I read the LND API for that
and wanted nothing to do with it!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I had a report of a 0.7.2 user whose node hadn't appeared on 1ml. Their
node_announcement wasn't visible to my node, either.
I suspect this is a consequence of recent version reducing the amount of
gossip they send, as well as large nodes increasingly turning off gossip
altogether from some peers (as we do). We should ignore timestamp filters
for our own channels: the easiest way to do this is to push them out
directly from gossipd (other messages are sent via the store).
We change channeld to wrap the local channel_announcements: previously
we just handed it to gossipd as for any other gossip message we received
from our peer. Now gossipd knows to push it out, as it's local.
This interferes with the logic in tests/test_misc.py::test_htlc_send_timeout
which expects the node_announcement message last, so we generalize
that too.
[ Thanks to @trueptolmy for bugfix! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I thought LND had a bug, but turns out it doesn't like out-of-order
short_channel_ids: in fact, the spec says they have to be in order!
This means we use uintmap instead of a htable for unknown_scids and
stale_scids so they're nicely ordered.
But our nodes-missing-announcements probe is harder since they can
also contain duplicates: we switch that to iterate through channels
rather than nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch adds a channel_id parameter to allow for specifying
channels that are lacking a short_channel_id.
Useful in the case where a peer has 1) multiple channels (ONCHAIN etc)
and 2) a channel where the funding transaction hasn't been
broadcast/mined.
This splits maybe_create_hsm_secret() in two parts (either encrypted
or in clear) for clarity, and adds an encryption detection in load_hsm().
There are actually three cases if an encryption key is passed:
- There is no hsm_secret => just create it and store the encrypted seed
- There is an encrypted hsm_secret => the provided key should be able to
decrypt the seed, if the wrong key is passed libsodium will nicely error
and hsmd will exit() to not throw a backtrace (using status_failed() as for
other errors) at the face of an user who mistyped its password.
- There is a non-encrypted hsm_secret => load the seed, delete the
hsm_secret, create the hsm_secret, store the encrypted seed.
Add a new startup option which will, if set, prompt the user for a
password to derive a key from. This key will later be used to encrypt
and/or decrypt `hsm_secret`.
This was made a noarg option even if it would have been preferable to
let the user the choice of how to specify the password. Since we have
to chose, better to not let the password in the commands history.
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
Christian Decker
Rusty Russell
lisa neigut
darosior
ZmnSCPxj jxPCSnmZ
Ken Sedgwick
Vasil Dimov
nicolas.dorier
Saibato
fiatjaf
Michael Schmoock
gorazdko
trueptolemy