We're going to make it async, so start by moving the core code into
invoice.c and having that directly call fail/success functions for the
htlc.
We add an extra check in fulfill_htlc() that the HTLC state is correct:
that can't happen now, but may once we're async.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is based on Christian's change, but removes all trace of the old codes.
I've proposed another spec change which removes this code altogether:
https://github.com/lightningnetwork/lightning-rfc/pull/544
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
This covers all the cases where an onion can be malformed; this means
we know in advance that it's bad. That allows us to distinguish two
cases: where lightningd rejects the onion as bad, and where the next
peer rejects the next onion as bad. Both of those (will) set failcode
to one of the BADONION values.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently use 'all-zeroes' as 'unknown', but NULL is more natural
even if we have to send it as all-zeroes over the wire due to
expressiveness limitations in our generation code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Usually, this means they return 'command_param_failed()' if param()
fails, and changing 'command_success(); return;' to 'return
command_success()'.
Occasionally, it's more complex: there's a command_its_complicated()
for the case where we can't exactly determine what the status is,
but it should be considered a last resort.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Handers of a specific form are both designed to be used as callbacks
for param(), and also dispose of the command if something goes wrong.
Make them return the 'struct command_result *' from command_failed(),
or NULL.
Renaming them just makes sense: json_tok_XXX is used for non-command-freeing
parsers too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This (will) avoid the plugin having to walk back from the params object
as it currently does.
No code changes; I removed UNUSED and UNNEEDED labels from the other
parameters though (as *every* json_rpc callback needs to call param()
these days, they're *always* used).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is prep work for when we sign htlc txs with
SIGHASH_SINGLE|SIGHASH_ANYONECANPAY.
We still deal with raw signatures for the htlc txs at the moment, since
we send them like that across the wire, and changing that was simply too
painful (for the moment?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The only change is that the final_incorrect_htlc_amount field is now 64
bit. Since no implementation yet parses that field, we just updated it
quietly in the spec.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If there are two HTLCs with the same preimage, lightningd would always
find the first one. By including the id in the `struct htlc_stub`
it's both faster (normal HTLC lookup) and allows lightningd to detect
that onchaind wants to fail both of them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's the only user of them, and it's going to get optimized.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
gossip.pydiff --git a/common/test/run-json.c b/common/test/run-json.c
index 956fdda35..db52d6b01 100644
The left join should make sure we still get the results but
referencing the fields and/or attempting to write them to the JSON-RPC
result will cause unforeseen problems. So just omit if we forgot
something.
Gossipd provided a generic "get endpoints of this scid" and we only
use it in one place: to look up htlc forwards. But lightningd just
assumed that one would be us.
Instead, provide a simpler API which only returns the peer node
if any, and now we handle it much more gracefully.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the source of failure in the test_restart_many_payments stress
test: we don't commit the outgoing HTLC immediately, instead waiting for
gossip to tell us the peer for the outgoing channel, then waiting for
that channeld to tell is it's committed. The result was incoming HTLCs
with no outgoing.
I initially pushed the HTLCs through that same path, but of course
(since peers are not connected yet!) the only result was that we failed
these HTLCs immediately. So I chose the far simpler course of just
failing them directly.
To reproduce this, I had to increase the test_restart_many_payments
num to 10, and run it with nice -20 taskset -c 0.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Noted by @cdecker, the term 'local' is grossly overused, and the hout
preimage is basically only used as a sanity check (though I've just put
a FIXME there for now).
Also eliminated spurious blank line which crept into wallet.c.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't expect payment or payment->route_channels to be NULL without an
old db, but putting an assert there reveals that we try to fail an HTLC
which has already succeeded in 'test_onchain_unwatch'.
Obviously we only want to fail an HTLC which goes onchain if we don't
already have the preimage!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
failoutchannel tells us which channel to send an update for (specifically
for temporary_channel_failure); but we don't save it into the db. It's
not even clear we should, since it's a corner case and the channel might
not even exist when we come back.
So on db restore, change such errors to WIRE_TEMPORARY_NODE_FAILURE
which doesn't need an update.
We also don't memset it to 0 in the normal case (we only access if it
failcode has the UPDATE bit set) so valgrind will trigger if we're
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't save them to the database, so fix things up as we load them.
Next patch will actually save them into the db, and this will become
COMPAT code.
Also: call htlc_in_check() with NULL on db load, as otherwise it aborts
internally.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we need to check when we've altered the state, so the checks
are moved to the callers of htlc_in_update_state and htlc_out_update_state.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a noop if we're opening a new channel (channel_fees_can_change(channel)
is false until funding locked in), but important if we're restarting.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. l1 update_fee -> l2
2. l1 commitment_signed -> l2 (using new feerate)
3. l1 <- revoke_and_ack l2
4. l1 <- commitment_signed l2 (using new feerate)
5. l1 -> revoke_and_ack l2
When we break the connection after #3, the reconnection causes #4 to
be retransmitted, but it turns out l1 wasn't telling the master to set
the local feerate until it received the commitment_signed, so on
reconnect it uses the old feerate, with predictable results (bad
signature).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
Michael Schmoock
Mark Beckwith