Up until now, riskfactor was useless due to implementation bugs, and
also the default setting is wrong (too low to have an effect on
reasonable payment scenarios).
Let's simplify the definition (by assuming that P(failure) of a node
is 1), to make it a simple percentage. I examined the current network
fees to see what would work, and under this definition, a default of
10 seems reasonable (equivalent to 1000 under the old definition).
It is *this* change which finally fixes our test case! The riskfactor
is now 40msat (1500000 * 14 * 10 / 5259600 = 39.9), comparable with
worst-case fuzz is 50msat (1001 * 0.05 = 50).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were only comparing by total msatoshis.
Note, this *still* isn't sufficient to fix our indirect problem, as
our risk values are all 1 (the minimum):
lightning_gossipd(25480): 2 hop solution: 1501990 + 2
lightning_gossipd(25480): 3 hop solution: 1501971 + 3
...
lightning_gossipd(25480): => chose 3 hop solution
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a seed, which is for (future!) unit testing consistency. This
makes it change every time, so our pay_direct_test is more useful.
I tried restarting the noed around the loop, but it tended to fail
rebinding to the same port for some reason?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a general rule, lightningd shouldn't parse user packets. We move the
parsing into gossipd, and have it respond only to permanent failures.
Note that we should *not* unconditionally remove a channel on
WIRE_INVALID_ONION_HMAC, as this can be triggered (and we do!) by
feeding sendpay a route with an incorrect pubkey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently only used by gossipd for channel elimination.
Also print them in canonical form (/[01]), so tests need to be
changed.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Christian and I both unwittingly used it in form:
*tal_arr_expand(&x) = tal(x, ...)
Since '=' isn't a sequence point, the compiler can (and does!) cache
the value of x, handing it to tal *after* tal_arr_expand() moves it
due to tal_resize().
The new version is somewhat less convenient to use, but doesn't have
this problem, since the assignment is always evaluated after the
resize.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly just copying over the copy-editing from the
lightning-rfc repository.
[ Split to just perform changes after the UNKNOWN_PAYMENT_HASH change --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
This is mainly just copying over the copy-editing from the
lightning-rfc repository.
[ Split to just perform changes prior to the UNKNOWN_PAYMENT_HASH change --RR ]
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Rusty Russell <@rustyrussell>
We keep a chain_hash in struct daemon, becayse otherwise we end up with
`&peer->daemon->rstate->chainparams->genesis_blockhash` which is a bit
ridiculous.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids some very ugly switch() statements which mixed the two,
but we also take the chance to rename 'towire_gossip_' to
'towire_gossipd_' for those inter-daemon messages; they're messages to
gossipd, not gossip messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Messages from a peer may be invalid in many ways: we send an error
packet in that case. Rather than internally calling peer_error,
however, we make it explicit by having the handle_ functions return
NULL or an error packet.
Messages from the daemon itself should not be invalid: we log an error
and close the fd to them if it is. Previously we logged an error but
didn't kill them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If another channel has set the optional `htlc_maximum_msat` field,
we should correctly parse that field and respect it when drawing up
routes for payments.
And use ARRAY_SIZE() everywhere which will break compile if it's not a
literal array, plus assertions that it's the same length.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this a lot, and had boutique helpers in various places. So add
a more generic one; for convenience it returns a pointer to the new
end element.
I prefer the name tal_arr_expand to tal_arr_append, since it's up to
the caller to populate the new array entry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have a lot of infrastructure to delay local channel_updates to
avoid spamming on each peer reconnect; we had to keep tracking of
pending ones though, in case we needed the very latest for sending an
error when failing an HTLC.
Instead, it's far simpler to set the local_disabled flag on a channel
when we disconnect, but only send a disabling channel_update if we
actually fail an HTLC.
Note: handle_channel_update() TAKES update (due to tal_arr_dup), but we
didn't use that before. Now we do, add annotation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We trade channel_update before channel_announce makes the channel
public, and currently forget them when we finally get the
channel_announce. We should instead apply them, and not rely on
retransmission (which we remove in the next patch!).
This earlier channel_update means test_gossip_jsonrpc triggers too
early, so have that wait for node_announcement.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's simpler and more robust to just check that it's not yet announced
(the broadcast index will be 0).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
BOLT 7's been updated to split the flags field in `channel_update`
into two: `channel_flags` and `message_flags`. This changeset does the
minimal necessary to get to building with the new flags.
If we receive a channel_announce but not a channel_update, we store the announce
but don't put it in the broadcast map.
When we delete a channel, we check if the node_announcement broadcast
now preceeds all channel_announcements, and if so, we move it to the
end of the map. However, with a channel_announcement at index '0',
this test fails.
This is at least one potential cause of the node map getting out of order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These happen after we compact the store; every log I've seen of a
restart on a real node has a message about truncating the store,
because node_announcements predate channel_announcements.
I extracted one such case from testnet, and reduced it to test here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As pointed out by @rustyrussell the capacity is now always defined, so we can
fold that into the construction of the channel itself.
Reported-by: Rusty Russell <@rustyrussell>
Signed-off-by: Christian Decker <@cdecker>
The `htlc_minimum_msat` parameter was ignored so far, and we'd be attempting to
pay and hitting a brick wall by doing so. This patch just skips channels that
are not eligible anyway.
We know the total channel capacity after checking for its existence on-chain, so
we can actually make use of that information to discard channels that don't have
a sufficient capacity anyway, reducing the number of failed attempts.
We were adding channels without their capacity, and eventually annotated them
when we exchanged `channel_update`s. This worked as long as we weren't
considering the channel capacity, but would result in local-only channels to be
unusable once we start checking.
'cursor < ser + max' isn't valid because we reduce 'max' as we go! Effectively
we'll stop once we're past halfway, which can only happen with ipv6 + a torv2
address.
Ths fix is one-line, but we rename 'max' to 'len' which makes its purpose
clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
tal_count() is used where there's a type, even if it's char or u8, and
tal_bytelen() is going to replace tal_len() for clarity: it's only needed
where a pointer is void.
We shim tal_bytelen() for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to just manually set ROUTING_FLAGS_DISABLED, but that means we
then suppressed the real channel_update because we thought it was a
duplicate!
So use a local flag: set it for the channel when the peer disconnects,
and clear it when channeld sends a local update.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't do anything for us now, since we actually tend to produce
DISABLE/ENABLE update pairs. But the infrastructure is useful for the
next patch.
We also add more details to the trace message in the core update code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
structeq() is too dangerous: if a structure has padding, it can fail
silently.
The new ccan/structeq instead provides a macro to define foo_eq(),
which does the right thing in case of padding (which none of our
structures currently have anyway).
Upgrade ccan, and use it everywhere. Except run-peer-wire.c, which
is only testing code and can use raw memcmp(): valgrind will tell us
if padding exists.
Interestingly, we still declared short_channel_id_eq, even though
we didn't define it any more!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We wrap it in 'struct pubkey' for typesafety and consistency, and the
next patch takes advantage of that when we move to pubkey_eq.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Michael Schmoock
Christian Decker
lisa neigut