This allows cmdline users to have more idea what's going on.
Inspired-by: https://github.com/ElementsProject/lightning/issues/4777
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `close` now notifies about the feeranges each side uses.
This affects the range we offer even without quick-close, but it's
more critical for quick-close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSONRPC: `close` now takes a `feerange` parameter to set min/max fee rates for mutual close.
This follows https://github.com/lightningnetwork/lightning-rfc/pull/847.
For anchor_outputs, we pass down a max_feerate to closingd, and set the
fee ceiling to MAX. It uses that to estimate the desired closing fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Anchor output mutual close allow a fee higher than the final commitment transaction (as per lightning-rfc #847)
Based on a commit by @niftynei, but:
- Separated quickclose logic from main loop.
- I made it indep of anchor_outputs, use and option instead.
- Disable if they've specified how to negotiate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It also gets rid of the requirement that close negotiation fee maximum
is the old commitment transaction. We still do that, however, to
avoid surprising old peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
We were actually using the last commit tx's size, since we were
setting it in lightningd. Instead, hand the min and desired feerates
to closingd, and (as it knows the weight of the closing tx), and have
it start negotiation from there.
This can be significantly less when anchor outputs are enabled: for
example in test_closing.py, the commit tx weight is 1124 Sipa, the
close is 672 Sipa!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: Use a more accurate fee for mutual close negotiation.
It handles all the cases of retransmission, and in the normal case
retransmits shutdown and immediately returns for us to run closingd.
This is actually far simpler and reduces code duplication.
[ Includes fixup to stop warn_unused_result from Christian ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: We could get stuck on signature exchange if we needed to retransmit the final revoke_and_ack.
And make all the callers choose which one. In general, I prefer warn,
which lets them reconnect and try again, however some places are either
stated that they must be errors in the spec itself, or in openingd
where we abandon the channel when we close the connection anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we now send warning messages and close the connection, except on unrecoverable errors.
1. Rename memleak_enter_allocations to memleak_find_allocations.
2. Unify scanning for pointers into memleak_remove_region / memleak_remove_pointer.
3. Document the functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The main change here is that the previously-optional open/accept
fields and reestablish fields are now compulsory (everyone was
including them anyway). In fact, the open/accept is a TLV
because it was actually the same format.
For more details, see lightning-rfc/f068dd0d8dfa5ae75feedd99f269e23be4777381
Changelog-Removed: protocol: support for optioned form of reestablish messages now compulsory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the `bitcoin_tx_add_input` interface to accept a witness script
and or scriptPubkey.
We save the amount + witness script + witness program (if known) to
the PSBT object for a transaction when creating an input.
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
We still close the channel if we *send* an error, but we seem to have hit
another case where LND sends an error which seems transient, so this will
make a best-effort attempt to preserve our channel in that case.
Some test have to be modified, since they don't terminate as they did
previously :(
Changelog-Changed: quirks: We'll now reconnect and retry if we get an error on an established channel. This works around lnd sending error messages that may be non-fatal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per BOLT02 #message-retransmission :
if `next_commitment_number` is 1 in both the `channel_reestablish` it sent and received:
- MUST retransmit `funding_locked`
The way we build transactions, serialize them, and compute fees depends on the
chain we are working on, so let's add some context to the transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We ask gossipd for the channel_update for the outgoing channel; any other
messages it sends us get queued for later processing.
But this is overzealous: we can shunt those msgs to the peer while
we're waiting. This fixes a nasty case where we have to handle
WIRE_GOSSIPD_NEW_STORE_FD messages by queuing the fd for later.
This then means that WIRE_GOSSIPD_NEW_STORE_FD can be handled
internally inside handle_gossip_msg(), since it's always dealt with
the same, simplifying all callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of reading the store ourselves, we can just send them an
offset. This saves gossipd a lot of work, putting it where it belongs
(in the daemon responsible for the specific peer).
MCP bench results:
store_load_msec:28509-31001(29206.6+/-9.4e+02)
vsz_kb:580004-580016(580006+/-4.8)
store_rewrite_sec:11.640000-12.730000(11.908+/-0.41)
listnodes_sec:1.790000-1.880000(1.83+/-0.032)
listchannels_sec:21.180000-21.950000(21.476+/-0.27)
routing_sec:2.210000-11.160000(7.126+/-3.1)
peer_write_all_sec:36.270000-41.200000(38.168+/-1.9)
Signficant savings in streaming gossip:
-peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
+peer_write_all_sec:35.780000-37.980000(36.43+/-0.81)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
make it a bit easier to track mutual channel closures by
adding broadcast txid to the listpeers billboard.
since lightningd manages the 'identity' of the closing tx we need
to send it back to closingd so it can update the billboard
appropriately.
Travis caught an error where this happened: when closingd reconnects it
was sending the reestablish message without the option_dataloss_protect
fields. That causes the peer to fail the channel!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Basically we tell it that every field ending in '_msat' is a struct
amount_msat, and 'satoshis' is an amount_sat. The exceptions are
channel_update's fee_base_msat which is a u32, and
final_incorrect_htlc_amount's incoming_htlc_amt which is also a
'struct amount_msat'.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
niftynei
Vasil Dimov
trueptolemy
Christian Decker
darosior