In this case, the user's default was info, but they specifically asked for debug
from one plugin. Since there were no per-file filters, it set filtering to the
default level, info, and rejected it. Since it's been explicitly filtered in,
we need to pass it at this point.
Reported-by: @wtogami
Fixes: #6503
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was strongly recommended by Russell O'Connor: the "ms" implies that
it's a BIP-32 master secret, and this is CLN specific.
If we changed the hrp to "cln" it would be better, but apparently that
means we no longer fit in a "standard billfold metal wallet" (and
our code assumes a 2-byte prefix anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It really has to be 0, since it's the complete secret. And we didn't handle
it well, (`a` would be treated as 0, for example!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thread the signed tx through so close's JSON return contains that,
rather than the unsigned channel->last_tx.
We have to split the "get cmd_id" from "resolve the close commands" though;
and of course, as before, we don't actually print the txids of multiple
transactions even though we may have multi in flight due to splice!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `close` returns a `tx` field with witness data populated (i.e. signed).
Fixes: #6440
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
If you actually ran your node with the botched "last_invoice_created_index" typo migration
(fortunately, not release, just master) you can get a db with both the real "last_invoices_created_index" and the bad "last_invoice_created_index" entries.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- adopt "const <type> *"convention
- remove use_shadow option for some pyln tests
- show prob. information of flows into paynotes
- show prob. of success of entire payment flow in paynotes
- minflow: We were not releasing the memory of flow arrays when replacing
them with a new canditate.
- use memleak_scan_obj in memleak_check
- replace u64 with size_t
Signed-off-by: Lagrang3 <eduardo.quintana@pm.me>
- remove internal gheap checks
- add check for arc_t.chanidx overflow
- remove outdated comments
- check the delta flow bounds before augmenting along a path
- get_flow_paths uses a dynamic tal array instead of a list.
- fix a unit test that depended on the order of returned flows
- fix bug: lightnind doesn't like if I reuse the partid of a failed
flow, therefore use a higher partid than any of the previous attempts.
- plugin_err instead of LOG_BROKEN if sendpay fails and we cannot get a
an error code.
- fix wrong comments.
- remove the background timer.
- This is a bugfix. Previous to this the MCF network was built using the
knowledge of the min and max liquidity but it didn't take into account
pending HTLCs.
- Also remove the min_prob_success option but hardcode a 90% value.
Removing some options that are not relevant to the user, they're kept
for developer mode only:
- base_fee_penalty
- min_prob_success
- prob_cost_factor
- remove heap.h, not used
Signed-off-by: Lagrang3 <eduardo.quintana@pm.me>
Clean restart of daemon after a tx-abort is a nice way to work around
the 'persistent' disconnect that we t-bast noticed.
Changelog-Fixed: `dualopend`: Fix behavior for tx-aborts. No longer hangs, appropriately continues re-init of RBF requests without reconnction msg exchange.
Bug Report:
- initiate a channel open eclair -> cln
- wait for the transaction to be published
- eclair initiates rbf, and cancels it by sending tx_abort before exchanging commit_sig
- at that point everything looks good, cln echoes the tx_abort and stays connected
- eclair initiates another RBF attempt and sends tx_init_rbf: for some unknown reason,
cln answers with channel_reestablish (??) followed by an error saying
"Bad reestablish message: WIRE_TX_INIT_RBF"
Diagnosis:
CLN is doing a reconnect after a tx-abort is sent.
Extra Test:
Realized that if we abort, we won't correctly advanced to NORMAL if
blocks are mined while we're in hanging state. CLN should advance
after block containing channel open is mined.
Reported-By: @t-bast
Make sure we've completely processed htlc, so we will definitely consider it an old spend. If we're too fast, l2 might consider it a legitimate unilateral close:
```
# Make sure both sides got revoke_and_ack for final.
l1.daemon.wait_for_log('peer_in WIRE_REVOKE_AND_ACK')
l2.daemon.wait_for_log('peer_in WIRE_REVOKE_AND_ACK')
# Now we really mess things up!
bitcoind.rpc.sendrawtransaction(tx)
bitcoind.generate_block(1)
l2.daemon.wait_for_log(' to ONCHAIN')
# FIXME: l1 should try to stumble along!
# l2 should spend all of the outputs (except to-us).
# Could happen in any order, depending on commitment tx.
needle = l2.daemon.logsearch_start
((_, txid1, blocks1), (_, txid2, blocks2)) = \
> l2.wait_for_onchaind_txs(('OUR_PENALTY_TX',
'THEIR_REVOKED_UNILATERAL/DELAYED_CHEAT_OUTPUT_TO_THEM'),
('OUR_PENALTY_TX',
'THEIR_REVOKED_UNILATERAL/OUR_HTLC'))
tests/test_closing.py:687:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
contrib/pyln-testing/pyln/testing/utils.py:1264: in wait_for_onchaind_txs
r = self.daemon.wait_for_log('Telling lightningd about {} to resolve {}'
contrib/pyln-testing/pyln/testing/utils.py:346: in wait_for_log
return self.wait_for_logs([regex], timeout)
```
You can see l2 here:
```
lightningd-2 2023-07-27T03:34:24.533Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-onchaind-chan#1: Their unilateral tx, old commit point
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Abstracts search and directory traversal. Adds support for installing
from a local git repository, a local directory, or a web hosted git repo
without relying on an api.
Changelog-Changed: Reckless can now install directly from local sources.
This cause of cascading failure was pointed out by @t-bast: if fees spike and
you don't timeout an outgoing onchain HTLC, you should nonetheless fail the incoming htlc
because otherwise the incoming peer will close on you.
Of course, there's a risk of losing funds, but this only happens if you weren't going to get the HTLC spend in time anyway. And it would also catch any other reason that the downstream onchain goes wrong, containing the damage.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported-by: @t-bast
Changelog-Fixed: Protocol: We will close incoming HTLCs early if the outgoing HTLC is stuck onchain long enough, to avoid cascating failure.
This commit addresses an issue to enhance the resilience of core
lightning when receiving node announcements.
According to BOLT 7 (The announcement_signatures Message),
if the node_signature OR the bitcoin_signature is NOT correct,
it is recommended to either send a warning and close the connection or send an error and fail the channel.
In this commit, we take a strict approach. If any error is detected, we
send an error and fail the open channel operation.
This is because the announcement_signatures operation is optional,
and we assume that it must be correct.
lnprototest at commit dea47c29b5541dbfe7fe53cc2598330e897fa4f4 report
the following error now.
```
2023-07-06T21:03:20.930Z DEBUG hsmd: Shutting down
ERROR root:helpers.py:170 Traceback (most recent call last):
File "/home/vincent/Github/lightning/external/lnprototest/tests/helpers.py", line 167, in run_runner
runner.run(test)
File "/home/vincent/Github/lightning/external/lnprototest/lnprototest/runner.py", line 99, in run
all_done = sequence.action(self)
^^^^^^^^^^^^^^^^^^^^^
File "/home/vincent/Github/lightning/external/lnprototest/lnprototest/structure.py", line 55, in action
all_done &= e.action(runner)
^^^^^^^^^^^^^^^^
File "/home/vincent/Github/lightning/external/lnprototest/lnprototest/event.py", line 365, in action
raise EventError(self, "{}: message was {}".format(err, msg.to_str()))
lnprototest.errors.EventError: `Expected msgtype-warning, got msgtype-error: message was error channel_id=a37362839b13f61cfe82d35bd397b1264c389b245847cfb6111b38892546dc77 data=4661696c656420746f20766572696679206e6f64655f7369676e61747572652e` on event [{"event": "ExpectMsg", "file": "test_bolt2-01-close_channel.py", "pos": "157"},]
============================================================================================================================================================== short test summary info ===============================================================================================================================================================
FAILED tests/test_bolt2-01-close_channel.py::test_close_channel_shutdown_msg_normal_case_receiver_side - AssertionError: `Expected msgtype-shutdown, got msgtype-error: message was error channel_id=a37362839b13f61cfe82d35bd397b1264c389b245847cfb6111b38892546dc77 data=4661696c656420746f20766572696679206e6f64655f7369676e61747572652e` on event [{"event": "ExpectMsg", "file": "test_bolt2-01-close_channel.py", "pos": "75"},]
FAILED tests/test_bolt2-01-close_channel.py::test_close_channel_shutdown_msg_wrong_script_pubkey_receiver_side - AssertionError: `Expected msgtype-warning, got msgtype-error: message was error channel_id=a37362839b13f61cfe82d35bd397b1264c389b245847cfb6111b38892546dc77 data=4661696c656420746f20766572696679206e6f64655f7369676e61747572652e` on event [{"event": "ExpectMsg", "file": "test_bolt2-01-close_channel.py", "pos": "157"},]
```
Changelog-Fixes: channeld: Verify the signature sent in announcement_signatures by the counterparty
Reported-by: lnprototest
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This is the simplest solution, not the best, but there's significant risk in try to remove the "we have a path" assumption in the code pay code.
Includes removing a `tal_steal` which was incorrect: the buffer has the same lifetime as the plugin, so if we steal it then things get messy when we free the struct payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `pay` will now pay your own invoices if you try.
Previously, the "payment" and "invoice" paths were completely separate, but this now calls both. It bypasses htlc_sets (and thus, cannot do MPP), and bypasses the hook too: the former is tied closely to HTLCs, and the hook is also very htlc-centric.
Includes finishing unfinished sentence in sendpay man page, as a bonus.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `sendpay` now allows self-payment of invoices, by specifying an empty route.
Clean these up: they were debug logs, but we want to pass this information
back for self-payments.
Also fixes "Attept" typo which altered tests!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pointed out by @ShahanaFarooqui, we leave a single unused entry in the datastore,
so we should clean that up too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If they have invalid runes, we bail, but if they have runes which used
a different master secret (old commando.py allowed you to override
secret), we just complain and delete them.
Note that this requires more mocks in wallet/test/run-db.c...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means (temporarily) that blacklisting won't work (fix later), and
means that old-style (commando.py) master-secret-override doesn't work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Plugins: `commando` no longer allows datastore ['commando', 'secret'] to override master secret (re-issue runes if you were using that!).
We used to activate on the first rune creation, but we're no longer in charge
of runes, so we can't make that call.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If you miss a wait event, you can catch up by doing listinvoices and
getting the max of these fields. It's also a good debugging clue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we have defined ordering, we can add a start param.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listinvoices` has `index` and `start` parameters for listing control.
Rusty Russell
Dusty Daemon
Aditya Sharma
Lagrang3
adi2011
niftynei
Alex Myers
Vincenzo Palazzo
Shahana Farooqui