It may also be appropriate to update the description of utxopsbt so that the search hits for "psbt" here on github make it clearer that utxopsbt returns what you're seeking. I'll make that part of this pull request too.
If you do update-mocks in a dirty tree, the recursive make that it
uses will try to rebuild things! Suppress that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #4494
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: config: New option `log-timestamps` allow disabling of timestamp prefix in logs.
This matters: if we connected, the address is probably usable for future connections.
But if they connected, the port is probably not (but the IP address may be).
Changelog-Added: JSON-RPC: `connect` returns "direction" ("in": they iniatated, or "out": we initiated)
Changelog-Added: plugins: `peer_connected` hook and `connect` notifications have "direction" field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise, we might find an address other than the one given and
the user might think that address worked.
Fixes: #4185
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `connect` returns `address` it actually connected to
In particular, txprepare gives us a nice way to get a valid PSBT for
testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `txprepare` and `withdraw` now return a `psbt` field.
Requiring the user to calculate the txid of the PSBT is a horrible, bad,
no-good idea.
Doesn't deprecate yet, so I can test that this path works while
multifundchannel still uses it.
Fixes: #4416 (at least for future users!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundchannel_complete` takes a psbt parameter.
Changelog-Added: lightningd: experimental-shutdown-wrong-funding to allow remote nodes to close incorrectly opened channels.
Changelog-Added: JSON-RPC: close has a new `wrong_funding` option to try to close out unused channels where we messed up the funding tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's not unheard of for people to give the wrong funding tx to us,
getting their funds stuck. Interestingly, we can allow mutual close
using a different txid and output number as long as they (solely)
funded the channel, and the channel hasn't been used.
This defines a "play area" feature to do just that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Allows us to clean up an in-progress open that we won't be completing
Changelog-Added: EXPERIMENTAL JSON-RPC: Permit user-initiated aborting of in-progress opens. Only valid for not-yet-committed opens and RBF-attempts
The `rbf_channel` hook uses `our_funding_msat`, which is a nicer
and more easily understood than the `openchannel2`
`accepter_funding_msat`.
This updates the `openchannel2` hook to use the same nomenclature as
`rbf_channel`.
Users have no idea what they would pay for unilateral closes.
At least this gives them a clue!
Reported-by: @az0re on IRC.
Changelog-Added: JSON-RPC: `listpeers` now shows latest feerate and unilaral close fee.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were always prefixing the `message` field with the internal type
prefix 0x0407, followed by the length prefix. Neither is needed since
the type being constant is of no interest to the plugin and the length
being implicit due to the JSON-encoding.
Reported-by: Ilya Evdokimov
Changelog-Fixed: plugin: The `custommsg` hook no longer includes the internal type prefix and length prefix in its `payload`
Changelog-Deprecated: plugin: The `message` field on the `custommsg` hook is deprecated in favor of the `payload` field, which skips the internal prefix.
We used to only set it for single-use offers (where it's required),
but it's still interesting for multi-use offers, so let's keep it
there.
We also put this field in the documentation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
network was missing regtest as an option.
The example was too simple, so I added a second one so show how the k option works.
The explanation of how k works should let the user know that in some cases lightningd will interpret the position of an argument which can lead to a weird response from lightningd.
let the users know that using null is not encouraged
@cdecker said "I think we should definitely not encourage null, since that is very brittle and forces us to keep argument ordering, and deprecating arguments is practically impossible."
In the case where you want a PSBT and also want the output to be added
as a change address, use `excess_as_change` = true.
Generates a change address to use. If you want to pay the excess
elsewhere, you will have to add separately.
Changelog-Added: JSON-RPC: Add new parameter `excess_as_change` to fundpsbt+utxopsbt
From #clightning:
(11:24:10) andytoshi: hiya, i'm trying to set up a new lightningd node, and when i run lightningd --network=bitcoin --log-level=debug --daemon
(11:24:17) andytoshi: i get errors of the form fetchinvoice: Malformed JSON reply '2021-01-25T00:51:16.655Z DEBUG plugin-offers: disabled itself at init: offers not enabled in config
(11:24:43) andytoshi: there are a couple variants of this, but always some form of "something: failed to parse <a log line> as json"
Indeed, we close stdout, and it ends up being reused for some plugin.
But the real problem is that we log to stdout by default, which doesn't
make sense. If they really want to discard logs, they can use
--log-file=/dev/null.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON failures when --daemon is used without --log-file.
By returning 'disable: <reason>' inside getmanifest or init result.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: plugins can now disable themselves by returning `disable`, even if marked important.
Means a reshuffle of our logic: we want to multiply by quantity before
conversion for maximum accuracy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. The field *expiry_time* is actually called *expires_at*.
2. The description field is missing.
3. The bolt11 field is missing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is experimental for now, but can eventually deprecated
'decodepay' and even decode other kinds of messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We split `send_invoice` offers inoo offerout (for want of a better name).
This simplifies the API.
Also took the opportunity to move the `vendor` tag to immediately
follow `description` (our tests use arguments by keywords, so no
change there).
Suggested-by: shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is required if we want to create a "bouncer" plugin (in my copious free time!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `invoice` now takes an optional `cltv` parameter.
1. Hoist 7200 constant into the bolt12 heade2.
2. Make preimage the last createinvoice arg, so we could make it optional.
3. Check the validity of the preimage in createinvoice.
4. Always output used flag in listoffers.
5. Rename wallet offer iterators to offer_id iterators.
6. Fix paramter typos.
7. Rename `local_offer_id` parameter to `localofferid`.
8. Add reference constraints on local_offer_id db fields.
9. Remove cut/paste comment.
10. Clarify source of fatal() messages in wallet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This takes an unsigned bolt11 (or bolt12 if EXPERIMENTAL_FEATURES) string
and signs it and puts it in the database.
The invoice command could now be moved out to a plugin, in fact.
Changelog-Added: JSON-RPC: `createinvoice` new low-level invoice creation API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"multi" means that specifying a parameter twice will append, not override.
Multi args are always given as a JSON array, even if only one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: new "multi" field allows an option to be specified multiple times.
Needed for v2 of channel opens, where the minimum weight is 110; a
'simple utxo' (sig + key) weighs in at 107, so we a need a way to
establish a floor for this case.
Changelog-Added: JSON-RPC: fundpsbt/utxopsbt have new param, `min_witness_utxo`, which sets a floor for the weight calculation of an added input
tools: Add `generatehsm` method to hsmtool to derivate BIP32 seeds from a
mnemonic using the BIP39 standard.
The new method uses libwally for the BIP39 to BIP32 derivation. It also
fails if an hsm_secret file already exists, so we do not overwrite
someone else's wallet without noticing.
It allows the use of passphrases, the ECHO mode in the terminal is
disable for higher security.
It currently supports "en", "es", "fr", "it", "jp", "zhs", "zht".
Changelog-Added: hsmtool: `hsm_secret` generation from a seed-phrase following BIP39.
We previously registered hooks up in who-replies-to-getmanifest-first
order, but then if any had dependencies it would scatter that order.
This allows users to manually set dependencies developers have
forgotten by specifying the plugins manually in their configuration or
cmdline. This was an excellent consideration by @mschmook.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The next patch will use these to order the hooks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: hooks can now specify that they must be called 'before' or 'after' other plugins.
For compatibility, we only do this if `allow-deprecated-apis` is false
for now. Otherwise scripts parsing should use `grep -v '^# '` or
start using `-N none`.
Changelog-Added: JSON-RPC: `close` now sends notifications for slow closes (if `allow-deprecated-apis`=false)
Changelog-Deprecated: cli: scripts should filter out '^# ' or use `-N none`, as commands will start returning notifications soon
Fixes: #3925
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This can be suppressed with -N.
Note that we wull get an error with older lightningd, but we ignore it
anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: cli: print notifications and progress bars if commands provide them.
This lets callers enable notifications; we won't send any if they don't.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `notifications` command to enable notifications.
Technically there *are* two feerates that we need to know:
- the feerate to use for the funding transaction, and
- the feerate to tell our peer to use for our commitment txs/htlc txs
As written, `multifundchannel` uses the same feerate for both. This
optional parameter will allow us to differentiate between the two, which
will be exceedingly handy for anchor output worlds. ;)
FIXME: test this
Changelog-Added: JSON API: `multifundchannel` has a new optional argument, 'commitment_feerate', which can be used to differentiate between the funding feerate and the channel's initial commitment feerate
This will allow us to build complex, multi-peer transactions, with
easeTM!
Changelog-Added: EXPERIMENTAL, Plugins: `openchannel_peer_sigs` notification, which contains a peer's signatures for the funding transaction (`opt_dual_fund`)
This is handy/necessary for getting multifundchannel to work, as we need
to know what output to tell all the other peers about.
Changelog-Added: Experimental!! JSON-RPC: openchannel_init returns a field `funding_serial` that indicates the serial_id of the funding output in the provided PSBT
`openchannel_signed` and `openchannel_update` which allow a user to
continue a openchannel or kick off the completion of a openchannel.
`openchannel_update` should be called until it returns with
`commitments_secured`.
There are 3 commands for opening a channel with dualfunding.
`openchannel_init` is the first of these.
It initializes the open-channel dialog, and stops once we've run out of
updates (input/outputs) to send to the peer.
Finally, extends the 'close_to' functionality up to the flagship 'open a
channel' command.
Changelog-Added: JSON-API `fundchannel` now accepts an optional 'close_to' param, a bitcoin address that the channel funding should be sent to on close. Requires `opt_upfront_shutdownscript`
Changelog-Added: JSON-RPC: delpay a new method to delete the payment completed or failed.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Fixes: #2679
Changelog-Added: JSON-RPC: New `multiwithdraw` command to batch multiple onchain sends in a single transaction. Note it shuffles inputs and outputs, does not use BIP69.
Changelog-Deprecated: plugin: `bcli` replacements should note that `sendrawtransaction` now has a second required Boolean argument, `allowhighfees`, which if `true`, means ignore any fee limits and just broadcast the transaction. Use `--deprecated-apis` to use older `bcli` replacement plugins that only support a single argument.
Some additional detail was warranted in several places, though the
listconfigs is better off simply referring to lightningd-config.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: doc: Many missing manual pages were completed
It is not part of the default documentation generation, thus will show up in
the git diff every time a maintainer-clean is done. We could also add it to
the default documentation generation, however it requires some rather
heavy-weight latex dependencies, and the file hasn't changed in several years.
And document exactly what it does: insist that an HTLC can pass of
this value (module assumptions of feerate).
Note that we remove the "is_opener" test from the capacity calculation
for anchor fees: it doesn't matter which side it is, someone has to pay
for anchor fees to it deducts from capacity.
This change breaks the test, which we rewrite.
Changelog-Changed: config: `min-capacity-sat` is now stricter about checking usable capacity of channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now that SHA256STAMP protects us, we can avoid timestamps altogether
so we don't get missing builds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This should be more robust in future: we SHA256 all of the deps.
For wiregen we prefix with EXPERIMENTAL_FEATURES, since it can effect them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's actually not possible to currently tell if you're using anchor_outputs
with a peer (since it depends on whether you both supported it at *channel open*).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-added: JSON-RPC: `listpeers` shows `features` list for each channel.
The idea is that you regenerate the man pages in the same commit you
alter them: that's how we know whether to try regenerating them or not
(git doesn't store timestamps, so it can't really tell).
Travis will now check this, so force them all to sync to this commit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can't pay them anyway, and at least one person used 0 instead of "any".
Closes: #3808
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice` no longer accepts zero amounts (did you mean "any"?)
Required for dual funding where the opener sets it.
Changelog-Added: JSON-RPC: `fundpsbt` takes a new `locktime` parameter
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This more closely mirrors fundpsbt (which will only select unreserved ones)
but you can turn it off if you want to e.g. rbf in future.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: New low-level command `utxopsbt` to create PSBT from existing utxos.
It's *possible* to do this using various RPC calls, but it's
unfriendly:
1. Call getinfo to get the current block height.
2. Call listfunds to map the UTXOs.
3. Create the PSBT and hope you get all the fields correct.
Instead, this presents an interface just like `fundpsbt`, with identical
returns.
I think it's different enough to justify a new command (though it
shares much internally, of course).
In particular, it's now quite simple to create a command which uses
specified utxos, and then adds more to meet any shortfall.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You'd need this if you ever wanted to make your own PSBT.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `listfunds` now has a `redeemscript` field for p2sh-wrapped outputs.
It's currently always 0, but it won't be once we replace txprepare.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fundchannel` has new `outnum` field indicating which output of the transaction funds the channel.
My testing shows that I received errors which turned out to be fatal ("/usr/libexec/c-lightning/lightning_connectd: libbacktrace: no debug info in ELF executable") when I had two `bind-addr=...` settings in my config file, which the instructions insinuated since c-lightning would already have been installed and runnable (therefore, already having a bind-addr).
This lets us handle it the same way we handle builtin commands, and also
lets us warn if they use deprecated apis and allow-deprecated-apis=false.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: can now mark their options and commands deprecated.
This allows plugins to choose how to present things in getmanifest.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: `getmanifest` may now include "allow-deprecated-apis" boolean flag.
Changelog-Deprecated: plugins: `getmanifest` without any parameters; plugins should accept any parameters for future use.
listpays: make doc-all missed
Changelog-Added: JSON-RPC: `listpays` can be used to query payments using the `payment_hash`
Changelog-Added: JSON-RPC: `listpays` now includes the `payment_hash`
Changelog-Added: New option `--important-plugin` loads a plugin is so important that if it dies, `lightningd` will exit rather than continue. You can still `--disable-plugin` it, however, which trumps `--important-plugin` and it will not be started at all.
Changelog-Changed: JSON-RPC: `delinvoice` will now report specific error codes: 905 for failing to find the invoice, 906 for the invoice status not matching the parameter.
And document the partid arg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `sendonion` has a new optional `bolt11` argument for when it's used to pay an invoice.
fundpsbt forces the caller to manually add their weight * feerate
to the satoshis they ask for. That means no named feerates.
Instead, create a startweight parameter and do the calc for them
internally, and return the feerate we used (and, while we're at it,
the estimated final weight).
This API change is best done now, as it would otherwise have to
be appended as a parameter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the normal case: you only want to reserve inputs which
are not already reserved. This saves you iterating through the
results and unreserving some if you weren't exclusive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
reserveinputs marks UTXOs reserved for 12 hours, so we won't select them
for spending: unreserveinputs marks them available again.
Exposes param_psbt() for wider use.
Disabled the test_sign_and_send_psbt since we're altering the API;
the final patch restores it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Te `sendonion` docs where claiming that the `first_hop` needs to specify a
`channel_id` whereas it should really be the `node_id` of the peer we are
trying to contact.
Changelog-Added: We now install `lightning-hsmtool` for your `hsm_secret` needs.
See: https://github.com/ElementsProject/lightning/issues/3717#issuecomment-644844594
It seems reasonable to add this to the standard install, and to document it properly as well, hopefully we can fill in the documentation better later on.
My node tried to rebuild one of them because it was lagging (I noticed
because mrkd was not installed).
Turns out a few were lagging, and lightning-dev-sendcustommsg.7 was totally
empty!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently 'listfunds' lies, a teensy eeinsy bit, in that it doesn't list
all of the funds in a wallet (it omits reserved wallet UTXOs). This
change makes the reserved outputs visible by listing them in the
'outputs' section along with a new field, 'reserved', which denotes the
UTXO's state
Changelog-Changed: JSON-RPC: `listfunds` 'outputs' now includes reserved outputs, designated as 'reserved' = true
the PPA is no longer maintained, the new hotness is the snapd install.
except that snapd does some weirdness with the binary names, calling it
bitcoin-core.daemon and bitcoin-core.cli. To get around this, you can
create a symbolic link to the snap binaries, which is what we outline
here.
We did not take the value of --commit-fee into account : this removes
the unused option from lightningd and instead registers it in bcli,
where we set the actual feerate of commitment transactions. This also
corrects the documentation.
Changelog-Fixed: config: we now take the --commit-fee parameter into account.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
The previous implementation was a bit lazy: in particular, since we didn't
remember the disabled plugins, we would load them on rescan.
Changelog-Changed: config: the `plugin-disable` option works even if specified before the plugin is found.
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
The documentation was wrong, and I copied my mistake to `libplugin` where it
was then ignored instead of ORed into the node's featurebits. This fixes both.
As discussed with Christian, prepending the length to the payload returned
is awkward, but it's the only way to set a legacy payload. As this will
be soon deprecated, simplify the external API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes testing easier, and makes sense: lightningd might not
*know* about other connected channels, depending on gossip, but if the
user specifies it we should obey it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON: `invoice` `exposeprivatechannels` now includes explicitly named channels even if they seem like dead-ends.
We had them split according the separate use-cases:
- testing
- doc-gen
- wire-gen
But that was causing new contributors to miss some dependencies when they
first got hacking. So this consolidates all of our own dependencies in a root
requirements.txt, with the notable exception of `pyln-client`, `pyln-testing`
and `pyln-proto` which are distributed as PyPI modules and therefore have
their own dependencies that need to be tracked in the module root.
Closes#3518
This regroups questions (frequently) seen in Github issues, on IRC, and
also some I've been asked in face to face.
Changelog-Added: doc: An FAQ was added, accessible at https://lightning.readthedocs.io/FAQ.html
Christian wrote the block chain rescaning paragraph.
Lisa corrected my poor english grammar.
Co-Authored-by: Christian Decker <decker.christian@gmail.com>
Co-Authored-by: Lisa Neigut <niftynei@gmail.com>
This is useful in general, but in particular it allows fundchannel to avoid YA
query to figure out if it can wumbo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON: `connect` returns `features` of the connected peer on success.
This cleans up the boutique handling of features, and importantly, it
means that if a plugin says to offer a feature in init, we will now
*accept* that feature.
Changelog-Fixed: Plugins: setting an 'init' feature bit allows us to accept it from peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This restriction was removed from the spec as of
86c2ebcc5973a4133d3ce4d80ae1c203061a1646.
We also fix up some strange formatting in that part of the documentation.
Changelog-changed: We now announce multiple addresses of the same type, if given.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ChangeLog-Added: New `getsharedsecret` command, which lets you compute a shared secret with this node knowing only a public point. This implements the BOLT standard of hashing the ECDH point, and is incompatible with ECIES.
Before this patch we used to send `double`s over the wire by just
copying them. This is not portable because the internal represenation
of a `double` is implementation specific.
Instead of this, multiply any floating-point numbers that come from
the outside (e.g. JSONs) by 1 million and round them to integers when
handling them.
* Introduce a new param_millionths() that expects a floating-point
number and returns it multipled by 1000000 as an integer.
* Replace param_double() and param_percent() with param_millionths()
* Previously the riskfactor would be allowed to be negative, which must
have been unintentional. This patch changes that to require a
non-negative number.
Changelog-None
the tests are not possible only by having tests/requirements.txt .
Running the whole testsuite also runs contrib/pyln-proto/tests/test_invoice.py
which needs requiremnets of pyln-proto and so on.
Also requirement coincurve requires libsecp256k1-dev headers.
As most developers need all requiremtents and we should tell them.
1. GH_TOKEN is probably required to run the changelog script.
2. Note the footnotes need updating; we no longer have [Unreleased].
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Fixed factual errors in `lightning-listchannels.7` documentation.
`delay` is ***not*** the unilateral close delay for that channel-direction!
Changelog-Changed: The hooks `db_write`, `invoice_payment`, and `rpc_command` now accept `{ "result": "continue" }` to mean "do default action", in addition to `true` (`db_write`), `{}` (`invoice_payment`), and `{"continue": true}` (`rpc_command`). The older "default" indicators are now deprecated and are now recognized only if `--deprecated-apis` is set.
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
* Fix usage of `echo "...\n..."` (without `-e`), generating a
broken output:
```
lightningd-config <lightningd-config.5.md>
lightningd\nlightning-autocleaninvoice.7.md <lightningd.8.md\nlightning-autocleaninvoice.7.md>
```
* Use `$(SORT)` instead of bare `sort` to avoid locale-dependent sort.
* Strip the trailing .[0-9].md without invoking sed.
* Sort all man pages as one block.
Changelog-None
ChangeLog-Fixed: Clarified about connection in documentation. Also, `fundchannel` already `connect`s if your node knows how to contact the desired peer for a few versions now, so clarify documentation about this as well.
Using it with a different value to the amount sent causes a crash in 0.8.0,
which is effectively deprecating it, so let's disallow it now.
Changelog-Changed: If the optional `msatoshi` param to sendpay for non-MPP is set, it must be the exact amount sent to the final recipient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
Fixes: #3192
Changelog-Added: `waitanyinvoice` now supports a `timeout` parameter, which when set will cause the command to fail when the timeout is reached; can set this to 0 to fail immediately if no new invoice has been paid yet.
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
Now that c-lightning is in the FreeBSD ports system (\o/)
update the installation instructions, which basically boil down
to just `pkg install c-lightning`.
Changelog-None
Dave Scotese
Rusty Russell
niftynei
Christian Decker
Jan Sarenik
Karol Hosiawa
Michael Schmoock
Matthias Debernardini
Luke Childs
keblek
ZmnSCPxj jxPCSnmZ
fiatjaf
Antoine Poinsot
positiveblue
grubles
Vincenzo Palazzo
Vincent
Saibato
Glen Cooper
rbndg
Sebastian Falbesoner
Aiden McClelland
Vasil Dimov
Ken Sedgwick