Caught because we generated an HTLCs which had already expired, since
we didn't know the latest block. Other errors are certainly possible,
so it's safest to load the entire thing before going live.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids us having to query it when we create anchor transaction, and
lets us always use dynamic fee information.
The config options for max and min are now percentages, rather than absolute.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer need it anywhere. This simplifies things to the point where
we might as well just not include dust outputs as we go, rather than
explicitly removing them, which gets rid of remove_dust.c as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Similar to the way we derive which outputs are which for old transactions
we steal, we derive them even for their current transaction.
We keep track of this information in peer->closing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment, for our or their unilateral close, we create a resolved[]
entry for our output, their output, and each HTLC, in cstate order. Some
of these outputs might not exist (too small), so it's actually better
to simply keep a resolved[] entry for each of the tx's actual outputs.
(We already changed the steal resolved[] array to work like this, but
these are trickier, since we rely on that order if we need to fulfill an
on-chain HTLC).
It also helps as we are weaning off knowing the cstate and permutation
mapping for each commitment transaction.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to stop keeping old commitment information (except the minimal
txid to commitment-number mapping). One place we currently use it is
after sending a commitment signature, and before we've received the
revocation for the old commitment. For this duration, there are two
valid commitment transactions.
So we store "their_prev_revocation_hash" explicitly for this duration.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a data-leak to send ack before we have verified identity of peer.
Plus, we can't send it until we know which peer it is, anyway!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And use this to resolve old transactions by comparing outputs with
HTLCs.
Rather than remembering the output ordering for every one of their
previous commitment transactions, we just remember the commitment
number for each commitment txid, and when we see it, derive all the
HTLC scriptpubkeys and the to-us and to-them scriptpubkeys, and figure
out which is which.
This avoids us having to save information on disk, except for the
txid->commitment-number mapping (and the shachain).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes it explicit, which is better for storing in a database (before
it was just what watch callback, plus peer->local.mindepth).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Move other logic into caller, but it's not complete (it still needs to
check some things, and still records some results).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Move other logic into caller: it grew this way because we used to have
a centralized "state" machine which knew nothing of these internal
details. But now we want to re-queue packets on reconnect, we really
want these routines to be idempotent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're weaning off the cstate arrays; use the htlc map. But for the
moment we keep the output basically the same.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had an occasional race where we hadn't gotten the remote revocation
before submitting fulfill (spotted by the HTLC state transition code).
Disallow this, but also add to the json output so we can wait for
an HTLC to be irrevocably committed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we always remove " from JSON, our parsing becomes simpler; turns
out that we did that in some places, and check()'s eval removed them
from the comparison.
We extract check_balance_single() to check the general balance, then
grep for HTLCs separately.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not separate "locally-offered" and "remotely-offered" ones; we can
distinguish them by htlc->state now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we only care about the latest commits, we can simply associate a
state with each HTLC, rather than using queues of HTLCs associated
with each commitment transaction.
This works far better in the context of a database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need SO_REUSEADDR, and we need to memset sockaddr to zero; valgrind
complains for both IPv4 and IPv6, but the invalid sin6_flowinfo causes
the IPv6 bind to fail altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
getchaintips returns tips even if we don't have the body for them, so
we need to look for the active tip, not just the first (most-work) one.
Here's what happens in the log:
+2849.963414597 lightningd(26779):BROKEN: bitcoin-cli getblock 0000000000000000018626ff7160bdf38a602e6650bd04ec258759ea578b106d false exited 91: 'error code: -32603
error message:
Can't read block from disk
'
And here's an example problematic getchaintips output:
[
{
"height": 419635,
"hash": "0000000000000000000fd32d87fce19efb7ccd07aa4ddaf1b94b9a219deec0f9",
"branchlen": 1,
"status": "headers-only"
},
{
"height": 419634,
"hash": "000000000000000002988d6512719697147cf252b2f64d247cf229266615d2bb",
"branchlen": 0,
"status": "active"
},
{
"height": 416372,
"hash": "0000000000000000004d0a54341c992ae174a91c8dd3981a9f2b3d3f6221ba59",
"branchlen": 1,
"status": "valid-headers"
},
{
"height": 416231,
"hash": "0000000000000000044d0d2c25f33cb48931540366149cde3fb0154f55b58c76",
"branchlen": 1,
"status": "headers-only"
}
]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
From doing a code walkthrough with Christian Decker; unnecessary const in
bitcoin/tx.c, an erroneous FIXME, a missing comment, and an unused struct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally redundant, since HTLC pointer is in that side's
commit_info, but makes HTLC completely self-contained.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update libsecp256k1 has a normalize function, which allows us to test
if the signature was in low-S form.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add Makefile target update-secp256k1, and run it.
The only API change is that len is now an IN-OUT parameter to serialization
functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use libsecp256k1 to convert signatures to DER; we were creating a
temporary one, but we really should be handing the one we have in dstate
through. This does that, everywhere.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
BOLT has been updated, so update code and comments. The receiving
side check is sufficient, as the limit is per-offerer, and that's the
only way the HTLCs get back to the offerer's side.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thus a node MUST estimate the deadline for successful redemption for
each HTLC it offers. A node MUST NOT offer a HTLC after this
deadline, and MUST fail the connection if an HTLC which it offered is
in either node's current commitment transaction past this deadline.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The most complex thing we've logged yet, so we extract the core of the
log_struct_ function to call it multiple times.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a corner case where they had it in their commit tx, in which
case we can't fail the HTLC until our commit tx has won. Again, we
use dstate->config.min_htlc_expiry.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now need to use bitcoin_witness_htlc with the r value, so that API
is updated to take 'struct rval' or 'struct sha256'.
We use the nc->delay amount (ie. dstate->config.min_htlc_expiry) to
wait for a timeout refund to be buried before "failing" upstream.
This should probably be made into a clearer parameter rather than
overloading this one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'dont-use-peer-nc-in-onchain-code.patch':
peer: Don't use peer->nc->delay for onchain case.
Use the config var directly. We should be freeing peer->nc when the
connection dies anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the command an actual user would use: it figures out the fee
and route, and pays it if it can.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a block triggers two peers to close, we ran io_break() on both of them; the
second overrode the first and we didn't end up freeing that one.
Rather than chase such bugs in future, simply iterate to see if any
peers need freeing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that the base fee is in millisatoshi, the proportional fee is
in microsatoshi per satoshi. ie. 1,000,000 means charge 1 satoshi for
every satoshi carried.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Most HTLCs we offer are triggered by an incoming HTLC from a different
peer. Save this "source" htlc, so we can fail/fulfill it when we
fail/fulfill this one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more copies!
I tried changing the cstate->side[].htlcs to htlc_map rather than a
simple pointer array, but we rely on those array indices heavily for
permutation mapping, and it turned into a major rewrite (especially
for the steal case).
Eventually, we're going to want to reconstruct the commit info for
older commit txs rather than keeping all the permutation and
per-commit-info HTLC information in memory, so we can do the work
then.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently keep copies of HTLCs in each commit_info structure, but
that's redundant. Keep per-peer per-direction maps of HTLCs, then we can
just throw pointers around (next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a more logical name, and a more logical place. We change
"funding" to "channel" in the remaining exposed symbols, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to change the code so that if it can't route, it will fail
the HTLC. The current low-level tests will hate this, so have a dev switch
to turn that off.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the logical place for it to belong: with the HTLC. For the manually-created
HTLCs, we create a simple one-hop route.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the more normal case; find by ID. The low-level json commands are
really just for testing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The protocol still supports both, but we now only support blocks.
It's hard to do risk management with timeouts in seconds, given block
variance. This is also signficantly simpler, as HTLC timeouts are
always fired in response to blocks, not wall-clock times.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Uses a gcc extension (cast to union) for typechecking, but that can be
removed for compilers which don't support it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A new 'accept-payment' command tells the node to fulfill HTLCs using
the R value if the amount is correct. It's not wired in yet.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Jacob