First, merge the _ahf_ and non-ahf interfaces.
Second, remove the always-NULL txs->cmd field.
Then, add optional id_prefix for bitcoind_sendrawx, so if it's
triggered by a command (e.g. "withdraw") it's shown correctly in logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is cleaner because, the `remote_addr` and `discovered_ip` are
related but two different things.
Within connectd and lightningd we use the peers `remote_addr` feature
to validate (and guess a port) to be used for IP discovery.
Also when a peer reports us a `remote_addr`, this is given to the plugin API
via the `peer_connected` hook. The network port here is not modified for
godd reason! This can be used i.e. to detect if we are behind a NAT.
But once lightningd figures enough peers report the same `remote_addr`,
it sets the port to the selected network and tells gossipd to use that for
`node_announcement` updates.
Hence, within gossipd, there is no (should not be) `remote_addr`.
Changelog-None
This includes the recommendation that we use 10 minute grace period,
so add quotes to where we use that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently discovered IPs are only announced when we don't have any
usable addresses detected or configured already. However, the cli
command `getinfo` still showed theses unannounced addr as if they
were announced.
Changelog-Fixed: peer_control: getinfo showing unannounced addresses.
Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
First, how we record "our_funds" and then apply pushes vs lease_fees
(for liquidity ad buys/sales) was exactly opposite.
For pushes we were reporting the total funded into the channel, with the
push representing how much we'd later moved to the peer.
For lease_fees we were rerporting the total in the channel, with the
push representing how much was already moved to the peer.
We fix this (from a view perspective) by re-adding lease fees to what's
reported in the channel funding totals. Since this is now new behavior
(for leased channel values), we added new fields so we can take the old
field names thru a deprecation cycle.
We also make it possible to differentiate btw a push and a lease_fee
(before they were all the same), by adding to new fields to `listpeers`:
`fee_paid_msat` and `fee_rcvd_msat`.
This allows us to avoid math in the bookkeeper, instead we just pick
the numbers out directly and record them.
Fixes#5472
Changelog-Added: JSON-RPC: `listpeers` now has a few new fields for `funding` (`remote_funds_msat`, `local_funds_msat`, `fee_paid_msat`, `fee_rcvd_msat`).
Changelog-Deprecated: JSON-RPC: `listpeers`.`funded` fields `local_msat` and `remote_msat` are now deprecated.
We used to tell connectd to remember our connect delay, and hand it
back (increased if necessary).
Instead, simply record when we last tried to connect. If it was less
than 10 minutes ago, double delay (up to 5 minutes max), otherwise
reset delay to 1 second.
This covers all scenarios: whether we reconnect then immediately
disconnect, or never successfully connect, it doesn't matter.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5453
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Connectd already does this when we *receive* an error or warning, but
now do it on send. This causes some slight behavior change: we don't
disconnect when we close a channel, for example (our behaviour here
has been inconsistent across versions, depending on the code).
When connectd is told to disconnect, it now does so immediately, and
doesn't wait for subds to drain etc. That simplifies the manual
disconnect case, which now cleans up as it would from any other
disconnection when connectd says it's disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Give them time to process any final messages! If there's a reconnect,
then we need to clean them up immediately of course.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to detect when lightningd hasn't seen our latest
disconnect/reconnect; in particular, we would hit the following pattern:
1. lightningd says to connect a subd.
2. connectd disconnects and reconnects.
3. connectd reads message, connects subd.
4. lightningd reads disconnect and reconnect, sends msg to connect to subd again.
5. connectd asserts because subd is alreacy connected.
This way connectd can tell if lightningd is talking about the previous
connection, and ignoere it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch:
1. connectd says it's connected (peer_connected)
2. we tell connectd we want to talk about each channel (peer_make_active)
3. connectd gives us an fd for each channel, and we connect it to a subd (peer_active)
4. OR, connectd says it sent something about a channel we didn't tell it about, with an fd (peer_active)
Now:
1. connectd says it's connected (peer_connected)
2. we start all appropriate subds and tell connectd to what channels/fds (peer_connect_subd).
3. if connectd says it sent something about a channel we didn't tell it about, we either tell
it to hang up (peer_final_msg), or connect a new opening daemon (peer_connect_subd).
This is the minimal-size patch, which is why we create socket pairs in
so many places to use the existing functions. Many cleanups are
possible, since the new flow is so simple.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to not return from "connect" until we had connected all the subds,
which introduced more races if something went wrong.
Remove this workaround, since we're going to rework this logic entirely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is redundant now, since connectd only sends us this once we tell
it it's OK, but that's changing, so clean up now. This means that
connectd will be able to make *unsolicited* closes, if it needs to.
We share logic with peer_please_disconnect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's available in listpeers() if you want to see it, otherwise it's not
really something users want to see in the normal course of operation.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Check funding_outnum validity first to avoid reading invalid outputs
Changelog-Fixed: Fixed a potential issue if the number of outputs decreases in a dualopen RBF or splice.
The direction only depends on the ordering between node_ids, not the
short_channel_id, so we can include it and it won't change. This was
causing some trouble loading the `channel_hints` in the `pay` plugin.
This is being hit: it's possible if connectd and lightningd get desynchronized,
and we'll handle this later when peer is activated.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
This adds config and commandline options for htlc_min_msat, htlc_max_msat and
announce_discovered_ip. The default is 0msat for htlc_min_msat, unlimited for
htlc_max_msat and enabled for announce_discovered_ip.
The announce_discovered_ip gets the disable commandline switch --disable-ip-discovery
Changelog-added: Config options for htlc_min_msat, htlc_max_msat and announce_discovered_ip.
We do this (send warnings) in almost all cases anyway, so mainly this
is a textual update, but there are some changes:
1. Send ERROR not WARNING if they send a malformed commitment secret.
2. Send WARNING not ERROR if they get the shutdown_scriptpubkey wrong (vs upfront)
3. Send WARNING not ERROR if they send a bad shutdown_scriptpubkey (e.g. p2pkh in future)
4. Rename some vars 'err' to 'warn' to make it clear we send a warning.
This means test_option_upfront_shutdown_script can be made reliable, too,
and it now warns and doesn't automatically close channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make sure it sees disconnect before reconnect, otherwise the next command
fails since we're now disconnected.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the address and direction as soon as it connects not just when
we're about to make it active: we want this even if we don't have
an active channel, or if the connect hook rejects it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Michael Schmoock
niftynei
adi2011
Dustin Dettmer
Christian Decker