Enable non-dev builds to send custom messages.
Preserves 'dev-' for compat-enabled builds.
Changelog-Changed: JSON-RPC: moved dev-sendcustommsg to sendcustommsg
This means remembering the connection direction. We also use the address to try
to reconnect, which we shouldn't bother with if they connect to us.
For peers from the database, we currently always save the addr: we shouldn't really
do this if they connected to us, since it's not useful for reconnecting (we don't
show the addr in JSON reply to listpeers unless we're connected, so it's only an
internal issue). This is left for future work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in line with the warnings draft, where all-zeroes in a
channel_id is no longer special (i.e. it will be ignored).
But gossipd would send these if it got upset with us, so it's best
practice to ignore them for now anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we treat error messages from peer which refer to "all channels" as warnings, not errors.
Since this all stays in dualopend/dual_open_control, we can hold
onto the openchannel_signed command to wait for a response here locally.
Previously we were splitting across the channeld/openingd boundary.
`openchannel_signed` commands hang out across the openingd/channeld
boundary -- we don't return until we've successfully broadcast the
transaction (or timed out waiting for them to send a tx_sigs back).
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec says to close the channel if they send us an error, but we
need to be more lenient to preserve channels with other
implementations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always have an addr entry in the db (though it may be an ephemeral socket
the peer connected in from). We don't have to handle a NULL address.
While we're there, simplify new_peer not to take the features args;
the caller who cares immediately updates the features anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use feerate in several places, and each one really should react
differently when it's not available (such as when bitcoind is still
catching up):
1. For general fee-enforcement, we use the broadest possible limits.
2. For closingd, we use it as our opening negotiation point: just use half
the last tx feerate.
3. For onchaind, we can use the last tx feerate as a guide for our own txs;
it might be too high, but at least we know it was sufficient to be mined.
4. For withdraw and fund_channel, we can simply refuse.
Fixes: #1836
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Prior to this, lightningd would hand uninteresting peers back to connectd,
which would then return it to lightningd if it sent a non-gossip msg,
or if lightningd asked it to release the peer.
Now connectd hands the peer to lightningd once we've done the init
handshake, which hands it off to openingd.
This is a deep structural change, so we do the minimum here and cleanup
in the following patches.
Lightningd:
1. Remove peer_nongossip handling from connect_control and peer_control.
2. Remove list of outstanding fundchannel command; it was only needed to
find the race between us asking connectd to release the peer and it
reconnecting.
3. We can no longer tell if the remote end has started trying to fund a
channel (until it has succeeded): it's very transitory anyway so not
worth fixing.
4. We now always have a struct peer, and allocate an uncommitted_channel
for it, though it may never be used if neither end funds a channel.
5. We start funding on messages for openingd: we can get a funder_reply
or a fundee, or an error in response to our request to fund a channel.
so we handle all of them.
6. A new peer_start_openingd() is called after connectd hands us a peer.
7. json_fund_channel just looks through local peers; there are none
hidden in connectd any more.
8. We sometimes start a new openingd just to send an error message.
Openingd:
1. We always have information we need to accept them funding a channel (in
the init message).
2. We have to listen for three fds: peer, gossip and master, so we opencode
the poll.
3. We have an explicit message to start trying to fund a channel.
4. We can be told to send a message in our init message.
Testing:
1. We don't handle some things gracefully yet, so two tests are disabled.
2. 'hand_back_peer .*: now local again' from connectd is no longer a message,
openingd says 'Handed peer, entering loop' once its managing it.
3. peer['state'] used to be set to 'GOSSIPING' (otherwise this field doesn't
exist; 'state' is now per-channel. It doesn't exist at all now.
4. Some tests now need to turn on IO logging in openingd, not connectd.
5. There's a gap between connecting on one node and having connectd on
the peer hand over the connection to openingd. Our tests sometimes
checked getpeers() on the peer, and didn't see anything, so line_graph
needed updating.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Removed `json_get_params`.
Also added json_tok_percent and json_tok_newaddr. Probably should
have been a separate PR but it was so easy.
[ Squashed comment update for gcc workaround --RR ]
Signed-off-by: Mark Beckwith <wythe@intrig.com>
This replacement is a little menial, but it explicitly catches all
the places where we allow a local socket. The actual implementation of
opening a AF_UNIX socket is almost hidden in the patch.
The detection of "valid address" is now more complex:
p->addr.itype != ADDR_INTERNAL_WIREADDR || p->addr.u.wireaddr.type != ADDR_TYPE_PADDING
But most places we do this, we should audit: I'm pretty sure we can't
get an invalid address any more from gossipd (they may be in db, but
we should fix that too).
Closes: #1323
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(This was sitting in my gossip-enchancement patch queue, but it simplifies
this set too, so I moved it here).
In 94711969f we added an explicit gossip_index so when gossipd gets
peers back from other daemons, it knows what gossip it has sent (since
gossipd can send gossip after the other daemon is already complete).
This solution is insufficient for the more general case where gossipd
wants to send other messages reliably, so replace it with the other
solution: have gossipd drain the "gossip fd" which the daemon returns.
This turns out to be quite simple, and is probably how I should have
done it originally :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And on channel_fail_permanent and closing (the two places we drop to
chain), we tell gossipd it's no longer important.
Fixes: #1316
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also report tx and txid, and whether we closed unilaterally or
bilaterally, if we could close the channel.
Also make a manpage.
Fixes: #1207Fixes: #714Fixes: #622
We also fold opening_got_hsm_funding_sig() into the caller; it was
previously a callback before we decided to always use the HSM
synchronously.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And now we can finally do the db upgrade to remove any OPENINGD
channels once, since we never put them back.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Each peer can have one 'uncommitted' channel, which is in the process
of opening. This is used for openingd, and then on return we convert
it into a full-fledged struct channel and commit it into the database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This provides a sanity check that we are in sync, and also keeps the
logic in the program and out of the SQL.
Since the destructor now doesn't clean up the peer, there are some
wider changes to be made when cleaning up. Most notably we create
lots of channels in run-wallet.c and they previously freed the peer:
now we need free the peer explicitly, so we need to free them first.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
niftynei
Christian Decker
ZmnSCPxj
Mark Beckwith