Before this it was channeld doing it, which was tied to a particular
channel. Create an API for lightningd to sign for any channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: hsmd: Added hsmd_forget_channel to enable explicit channel deletion. ([#6987])
Motivation: Previously, a signer prematurely forgetting a channel led
to failures in unresolved channel requests. This update introduces
hsmd_forget_channel, allowing nodes to explicitly notify signers when
a channel is irrevocably resolved and can be safely forgotten. This
ensures synchronized channel cleanup between nodes and signers.
This change maintains backward and forward compatibility. Nodes
explicitly check whether a signer has `WIRE_HSMD_FORGET_CHANNEL`
capability before sending the message. Nodes without
`WIRE_HSMD_FORGET_CHANNEL` capability won't send this message. Signers
capable of handling this message but not receiving it will continue to
use conservative pruning methods.
Fixes#6987
In general, a validating signer may be under a different operational
environment than the node, and therefore may have a different
source of on-chain data. The signer may therefore temporarily disagree
on whether a funding or splice transaction is locked (buried).
We would like to ensure agreement between the signer and the
node on how to progress a channel's state.
The following message are added to provide a solution:
- `check_outpoint(outpoint) -> bool` - check if the signer agrees that a funding candidate outpoint is buried
- `lock_outpoint(outpoint)` - change the funding/splice state to locked
Link: https://github.com/ElementsProject/lightning/issues/6722
Suggested-by: @devrandom
Co-Developed-by: Ken Sedgwick <ken@bonsai.com>
Changelog-Added: hsmd protocol: Added hsmd_check_outpoint and hsmd_lock_outpoint
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
The assertion may not make sense if we change the
meaning of `push_value` to be relative, especially since
negative values appear as large positive.
Suggested-by: Ken Sedgwick <ken@bonsai.com>
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Originally VLS used hsmd_ready_channel as an early call during channel
setup, but later the BOLT-2 spec changed the name of funding_locked to channel_ready.
This is very confusing because the hsmd_ready_channel is not directly
related to the new channel_ready.
This commit is renaming the hsmd_ready_channel to hsmd_setup_channel.
Link: https://github.com/ElementsProject/lightning/issues/6717
Suggested-by: Ken Sedgwick
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This makes it easier to use outside simple subds, and now lightningd can
simply dump to log rather than returning JSON.
JSON formatting was a lot of work, and we only did it for lightningd, not for
subdaemons. Easier to use the logs in all cases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The nomenclature confusion mean that we were ANDING a capability
with a message number (29) which always returned non-zero. We really
do need a new capability which we can hand to channeld to make these
splice txs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I obviously like the word "capabilities" since I reused it to refer
to the HSM's overall features :(
Suggested-by: @ksedgwic
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
In most cases, it's the same as option_anchor_outputs, but for
fees it's different. This transformation is the simplest:
pass it as a pair, and test it explicitly.
In future we could rationalize some paths, but this was nice
and mechanical.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since HTLC txs when using anchors are
SIGHASH_SINGLE|SIGHASH_ANYONECANPAY, we can attach other inputs to
give it a higher feerate. But we need the HSMd to actually sign the
combo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. anchor_to_remote_redeem => bitcoin_wscript_to_remote_anchored,
which matches other witness script producing functions and makes
it clear that it's a to_remote variant.
2. is_anchor_witness_script => is_to_remote_anchored_witness_script
makes it clear that it's about a to_remote output (as altered
when anchors are enabled) not an anchor output!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We previously used WIRE_HSMD_SIGN_DELAYED_PAYMENT_TO_US,
WIRE_HSMD_SIGN_REMOTE_HTLC_TO_US, WIRE_HSMD_SIGN_PENALTY_TO_US and
WIRE_HSMD_SIGN_LOCAL_HTLC_TX which allow onchaind to sign txs,
but only for its specific channel.
We now want lightningd to sign these, but it's not bound to a specific
channel. So let's add variants that don't require that.
We are also now explicit about *what input* to sign. It's always zero
for now, but future combinations may change that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Libwally update breaks compatibility, so
we do this in one large step.
Changelog-Changed: JSON-RPC: elements network PSET now only supports PSETv2.
Changelog-Added: JSON-RPC: PSBTv2 supported for fundchannel_complete, openchannel_update, reserveinputs, sendpsbt, signpsbt, withdraw and unreserveinputs parameter psbt, openchannel_init and openchannel_bump parameter initialpsbt, openchannel_signed parameter signed_psbt and utxopsbt parameter utxopsbt
Importantly, adds the version number at the *front* to help future
parsing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fix-hsm-check-pubkey.patch':
fixup! hsmd: capability addition: ability to check pubkeys.
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It was very tied to x-only keys; we could support it in a backwards
compatibility mode for a while, but getting refunds or proving old
pre-finalization invoices is not worth spending time on.
Changelog-EXPERIMENTAL: offers: old `payer_key` proofs won't work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the one place where we hand point32 over the wire internally, so
remove it.
This is also our first hsm version change!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise I know we'll miss it. Simply check for a mention: we could well
change things multiple times within a single release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With the rise of external HSMs like VLS, this is no longer an
internal-only API. Fortunately, it doesn't change very fast so
maintenance should not be a huge burden.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We will now simply reject old-style ones as invalid. Turns out the
only trace we could find is a channel between two nodes unconnected to
the rest of the network.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: We now require all channel_update messages include htlc_maximum_msat (as per latest BOLTs)
Add memleak_ignore_children() so callers can do exclusions themselves.
Having two exclusions was always such a hack!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
client_read_next(…) calls io_read_wire(…), passing &c->msg_in as the
address of a pointer that will be set to the address of the buffer that
io_read_wire_(…) will allocate, and passing c (a pointer to the struct
client instance) as the parent for the new allocation. As long as the
struct client instance eventually gets freed, the allocated message
buffer will be freed too, so there is no "leak" in the strict sense of
the term, but the freeing of the buffer may not occur for an arbitrarily
long time after the buffer has become disused, and indeed many millions
of message buffers may be allocated within the lifetime of one struct
client instance.
handle_client(…) ultimately hands off the c->msg_in to one of several
message-type-specific handler functions, and those functions are not
TAKES or STEALS on their message buffer parameters and do not free their
message buffer arguments. Consequently, each successive call to
client_read_next(…) will cause io_read_wire_(…) to overwrite the
c->msg_in pointer with the address of a newly allocated message buffer,
and the old buffer will be left dangling off of the struct client
instance indefinitely.
Fix this by initializing c->msg_in to NULL in new_client(…) and then
having client_read_next(…) do `c->msg_in = tal_free(c->msg_in)` prior to
calling io_read_wire(…). That way, the previous message buffer will be
freed just before beginning to read the next message. The same strategy
is already employed in common/daemon_conn.c, albeit without nulling out
dc->msg_in after freeing it.
Fixes: #5035
Changelog-Fixed: hsmd: Fixed a significant memory leak
Rusty Russell
Devrandom
Ken Sedgwick
Vincenzo Palazzo
Dusty Daemon
Greg Sanders
niftynei
adi2011
Michael Dance
Matt Whitlock
Michael Schmoock