This allows us to add other fields, such as version information,
warnings or invoiceless payments, later.
(Note: the deprecated listinvoice is unchanged)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This matches the other names, and also the return value is about to change.
This will be removed before release!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This can be used for upgrades to make sure you're not using deprecated
options, JSON commands, JSON fields, etc.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For performance, we delay entering the 'wallet_payment' into the db
until we actually commit to the HTLC (when we have to touch the DB
anyway).
This opens a race where we can try to pay twice, and since it's not in
the database yet, we don't notice the duplicate.
So remove the temporary payment field from htlc_out, which was always
an uncomfortable hack, and make the wallet code abstract over the
deferred entry a little by maintaining a 'unstored_payments' list
and incorporating that in results.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need these to decode any returned errors.
We remove it from struct pay_command too, and load directly from db
when we need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should be saving this, as it's our proof of payment. Also, we return
it if they try to pay again.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This, of course, should never be used. But it helps maintain connections
for the moment while we dig deeper into feerates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a common occurence on pruned nodes. By calling the callback
upon failures, we communicate that we couldn't verify the txoutput. We
fail safe rejecting any channel we can't verify.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This means we print out the correct path with --debugger, which
can be vital if there are multiple binaries (eg. compiled vs installed).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_get_params does this for us.
Fixes: 78adf0b (pay: allow 'null' msatoshi field.)
Reported-by: ZmnSCPxj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pulling up the save call from `peer_save_commitsig_received` into its
caller `peer_got_commitsig` and adding a call to
`peer_sending_commitsig`
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Message buffer `why` is allocated in the `peer` context and also freed when peer is freed.
Only explicitly free the buffer when peer itself is not freed yet.
exit status is not enough to detect spent outputs. gettxout will return a
success exit code and 0 bytes.
Signed-off-by: William Casarin <jb55@jb55.com>
We'll pass this down to gossip and make sure to re-announce/update
channels every so often. This is also used as a pruning timer, i.e.,
channels that have not been updated in 2 x channel-update-interval
will be pruned from the local view.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since most callers use positional arguments, we should allow a 'null'
literal where we require no value at all.
Also adds some more value tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Paid invoices need to know how much was actually paid: both for the case
where no 'msatoshi' amount was specified, and for the normal case, where
clients are permitted to overpay in order to help them disguise their
payments.
While we migrate the db, we leave this field as 0 for old paid
invoices. This is unhelpful for accounting, but at least clearly
indicates what happened if we find this in the wild.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
'rhash' is the old terminology, but 'payment_preimage' and
'payment_hash' were decided on for the BOLTs, so we should fix that here.
We still use rhash internally, but that's much easier to fix.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Different commands (listinvoice, delinvoice, waitinvoice,
waitanyinvoice) returned different fields, as not all were updated.
This makes them uniform.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This reuses the same code internally, and also now means that we deal
correctly with "any" msatoshi invoices: the old code would a return
'msatoshi' of 0 in that case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The manfile and the online help use 'msatoshi', the returned
response uses 'msatoshi', nearly every invoice-related
monetary amount is labelled 'msatoshi' and not 'amount'.
It would be nice if bitcoind had an RPC to do this in one, but that's
a bit much to ask for. We could also hand around proofs, for lite nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. htlc->fail has been changed to a u8 *.
2. wallet_get_newindex saves to the db.
3. peer->next_htlc_id is saved to the db in peer_save_commitsig_sent() below.
4. We do store commit in peer_save_commitsig_received(peer, commitnum),
and the fixme below talks about HTLC sigs.
5. We do commit shachain and next_per_commit_point in wallet_shachain_add_hash
and update_per_commit_point respectively.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All other users of json_get_params(...) check the return value:
```
lightningd/chaintopology.c: if (!json_get_params(buffer, params,
lightningd/chaintopology.c: if (!json_get_params(buffer, params,
lightningd/dev_ping.c: if (!json_get_params(buffer, params,
lightningd/gossip_control.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/invoice.c: if (!json_get_params(buffer, params, "label", &labeltok, NULL)) {
lightningd/invoice.c: if (!json_get_params(buffer, params,
lightningd/jsonrpc.c: if (!json_get_params(buffer, params,
lightningd/pay.c: if (!json_get_params(buffer, params,
lightningd/pay.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
lightningd/peer_control.c: if (!json_get_params(buffer, params,
wallet/walletrpc.c: if (!json_get_params(buffer, params,
wallet/walletrpc.c: if (!json_get_params(buffer, params, "tx", &txtok, NULL)) {
```
I've only seen this under travis, so I can't verify that this fixes it,
but it's certainly a bug which could cause that issue.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is necessary to grad the their_unilateral/to-us outputs since
they aren't being harvested by `onchaind`
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the scriptpubkey that onchaind spends all funds to, except for
the their_unilateral/to-us case, so we better recognize that address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the only case in which we don't respend to a simple keyindex'd
pubkey, so we need to handle this for future spends.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We always arm the funding_lockin_cb, even if we don't need to. If we
have an short_channel_id already from the db, this was replacing it
and leaking the old one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we panic when we see our root reorg out, even if we're not doing
anything yet, restoring the 100 block margin is the simplest fix.
Unfortunately this means adding a 100-block spacer in the tests, so things
don't get confused.
Fixes: #511
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is surprisingly simple. We set up the watches for funding tx
depth and the funding output, then if it's not onchain we ask gossipd
to reconnect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Load the first block we're possibly interested in, then load the peers so
we can restore the tx watches, then finally replay to the current tip.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Eventually we want to save blockchain in db to avoid this scan, but
for the moment, we need to reload as far back as we may be interested in.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This gives us a lower bound on where funding tx could be.
In theory, it could be lower than this if we get a reorganization, but
in practice this is already a 1-block buffer (since we can't get into
current block, only the next one).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In the normal (peer-to-peer) path, the HTLC state prevents us fulfilling
twice, but this goes out the window with onchain HTLCs.
The actual assert which caught it was lightningd/pay.c:70 (payment_succeeded)
in the test_htlc_in_timeout test, after the next commit.
So add an assert earlier (in fulfill_our_htlc_out) and check in the
one caller where it can be true.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to load the new tip and work backwards until we joined up with
the previous tip. That consumed quite a lot of memory if there were
many blocks.
Instead, just poll on blocknum+1, and grab it once that succeeds. If
prev is different from what we expect (reorg), we free the current tip
and try again.
We could theoretically miss a reorg which is the same length (2 block
reorg with more work due to difficulty adjustment), but even if that
happened we'd catch up on the next block.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It definitely changes when we get a block, but it also changes between
blocks as mempool fills. So put it on its own timer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_blkid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's just a sha256_double, but importantly when we convert it to a
string (in type_to_string, which is used in logging) we use
bitcoin_txid_to_hex() so it's reversed as people expect.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I prefer the typesafety of specific functions, rather than having the
caller know that txids are traditionally reversed in bitcoin.
And we already have a bitcoin_txid_to_hex() function for this.
Closes: #411
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
* Add port parsing support to parse_wireaddr. This is in preparation for storing
addresses in the peers table. This also makes parse_wireaddr a proper inverse of
fmt_wireaddr.
* Move parse_wireaddr to common/wireaddr.c this seems like a better place for
it. I bring along parse_ip_port with it for convenience. This also fixes some
issues with the upcoming ip/port parsing tests.
Signed-off-by: William Casarin <jb55@jb55.com>
We set hout->key.id when channeld tells us what it is, but if channeld
dies before that we free the hout, and our destructor logs it:
Valgrind error file: valgrind-errors.20312
==20312== Use of uninitialised value of size 8
==20312== at 0x53ABC9B: _itoa_word (_itoa.c:179)
==20312== by 0x53B041F: vfprintf (vfprintf.c:1642)
==20312== by 0x53B17D5: buffered_vfprintf (vfprintf.c:2330)
==20312== by 0x53AEAA5: vfprintf (vfprintf.c:1301)
==20312== by 0x53B7D63: fprintf (fprintf.c:32)
==20312== by 0x128BAC: hout_subd_died (peer_htlcs.c:316)
==20312== by 0x16D8E0: notify (tal.c:240)
==20312== by 0x16DD95: del_tree (tal.c:400)
==20312== by 0x16DDE7: del_tree (tal.c:410)
==20312== by 0x16DDE7: del_tree (tal.c:410)
==20312== by 0x16E1B4: tal_free (tal.c:509)
==20312== by 0x162B5C: io_close (io.c:443)
==20312== by 0x12D563: sd_msg_read (subd.c:508)
==20312== by 0x161EA5: next_plan (io.c:59)
==20312== by 0x1629A2: do_plan (io.c:387)
==20312== by 0x1629E0: io_ready (io.c:397)
==20312== by 0x164319: io_loop (poll.c:305)
==20312== by 0x118E21: main (lightningd.c:334)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Accuracy improvements:
1. We assumed the output was a p2wpkh, but it can be user-supplied now.
2. We assumed we always had change; remove this for wallet_select_all.
Calculation out-by-one fixes:
1. We need to add 1 byte (4 sipa) for the input count.
2. We need to add 1 byte (4 sipa) for the output count.
3. We need to add 1 byte (4 sipa) for the output script length for each output.
4. We need to add 1 byte (4 sipa) for the input script length for each input.
5. We need to add 1 byte (4 sipa) for the PUSH optcode for each P2SH input.
The results are now a slight overestimate (due to guessing 73 bytes
for signature, whereas they're 71 or 72 in practice).
Fixes: #458
Reported-by: Jonas Nick @jonasnick
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Two changes:
- Fixed the function signature of noleak_ to match in both
configurations
- Added memleak.o to linker for tests
Generating the stubs for the unit tests doesn't really work since the
stubs are checked in an differ between the two configurations, so
adding memleak to the linker fixes that, by not requiring stubs to be
generated in the first place.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We can call this multiple times. The best solution is to add and remove
the signature so it's always unsigned as we expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The pay command in particular, attaches a reasonable number of
temporaries to cmd, knowing they'll be freed once cmd is done.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is called when we load from database: clearly our tests aren't thorough
enough because we were allocating and initializing `r` in an unused structure.
invs is also the owner already; functions which steal are a bit surprising
to callers, so we either document them, or just don't do it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have things which we don't keep a pointer to, but aren't leaks.
Some are simply eternal (eg. listening sockets), others cases are
io_conn tied to the lifetime of an fd, and timers which expire.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
memleak doesn't detect pointers to within an object, only pointers to their
exact address (it's simpler this way). Moving the linked list to the
top of the structure means it can follow the chain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
memleak doesn't detect pointers to within an object, only pointers to their
exact address (it's simpler this way). Moving the linked list to the
top of the structure means it can follow the chain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is not a child of cmd, since they have independent lifetimes, but
we don't want to noleak them all, since it's only the one currently in
progress (and its children) that we want to exclude.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the tal notifiers to attach a `backtrace` object on every
allocation.
This also means moving backtrace_state from log.c into lightningd.c, so
we can hand it to memleak_init().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a primitive mark-and-sweep-style garbage detector. The core is
in common/ for later use by subdaemons, but for now it's just lightningd.
We initialize it before most other allocations.
We walk the tal tree to get all the pointers, then search the `ld`
object for those pointers, recursing down. Some specific helpers are
required for hashtables (which stash bits in the unused pointer bits,
so won't be found).
There's `notleak()` for annotating things that aren't leaks: things
like globals and timers, and other semi-transients.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
jsonrpc handlers usually directly call command_success or
command_fail; not doing that implies they're waiting for something
async.
Put an explicit call (currently a noop) there, and add debugging
checks to make sure it's used.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Couldn't find a good place to put these messages, we probably want to
do the same capability based request routing that we did for the HSM,
but for now this just defines the message in the master messages file.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
If send_htlc_out() fails, it doesn't initialize pc->out; that can
make us think it's still in progress.
Reported-by: Jonas Nick
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When gossipd sends a message, have a gossip_index. When it gets back a
peer, the current gossip_index is included, so it can know exactly where
it's up to.
Most of this is mechanical plumbing through openingd, channeld and closingd,
even though openingd and closingd don't (currently) read gossip, so their
gossip_index will be unchanged.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All peers come from gossipd, and maintain an fd to talk to it. Sometimes
we hand the peer back, but to avoid a race, we always recreated it.
The race was that a daemon closed the gossip_fd, which made gossipd
forget the peer, then master handed the peer back to gossipd. We stop
the race by never closing the gossipfd, but hand it back to gossipd
for closing.
Now gossipd has to accept two fds, but the handling of peers is far
clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As demonstrated in the test at the end of this series, openingd dying
spontaneously causes the conn to be freed which causes the subd to be
destroyed, which fails the peer, which hits the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than using the destructor, hook up the cmd so we can close it.
peers are allocated off ld, so they are only destroyed explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We are still generating only char* style aliases, but the field is
defined to be unicode, which doesn't mix too well with char.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We don't use it yet, but now we'll decode correctly.
See: https://github.com/lightningnetwork/lightning-rfc/pull/317
lightning-rfc commit: ef053c09431442697ab46e83f9d3f86e3510a18e
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Change all calls to use the correct serialization and deserialization
functions, include the correct headers and remove the control
messages.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The master now hands channeld either an error code, and channeld
generates the error message, or an error message relayed from another
node to pass through.
This doesn't fill in the channel_update yet: we need to wire up gossipd
to give us that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently lightningd does this, but channeld is perfectly capable of doing it.
channeld is also in a far better position to add channel_updates to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
estimatesmartfee 4 ECONOMICAL was too high for lnd, so drop it, with some
increased security risk.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The filter is being populated while initializing the daemon and by
adding new keys as they are being generated. The filter is then used
in connect_block to identify transactions of interest.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is mainly used to filter for transactions that may be of interest
to us, i.e., whether one of our keys is the recipient. It currently
does onyl simple scriptpubkey checks, but will eventually be extended
to use bloomfilters and add more sophisticated checks.
For now the goal is to speed up the processing of blocks during startup.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This addresses a performance regression introduced by
6ceb375650. We were storing it in an
otherwise empty DB transaction, which means that DB transaction was no
longer a no-op. Now we defer storing until we need to store the
corresponding HTLC anyway, so we can just piggyback on top of that
transaction.
This is also more consistent since we'd be forgetting the payment
anyway if we restart between adding the HTLC and committing to it.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We only send them when we're not awaiting revoke_and_ack: our
simplified handling can't deal with multiple in flights.
Closes: #244
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The wire protocol uses this, in the assumption that we'll never see feerates
in excess of 4294967 satoshi per kiloweight.
So let's use that consistently internally as well.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Depending on what we're doing, we can want different ones. So use
IMMEDIATE (estimatesmartfee 2 CONSERVATIVE), NORMAL (estimatesmartfee
4 ECONOMICAL) and SLOW (estimatesmartfee 100 ECONOMICAL).
If one isn't available, we try making each one half the previous.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means we convert it when retrieving from bitcoind; internally it's
always satoshi-per-1000-weight aka millisatoshi-per-weight.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Test objects must be added to $(ALL_OBJS) so they correctly depend on
CCAN headers etc.
Also, each test in a subdir must depend on headers and src in the parent
directory, as it will often #include them directly.
Reported-by: Christian Decker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our testsuite uses --dev-fail-on-subdaemon-fail, so I didn't notice this
until I turned that off to chase a bug.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
All the callers need to pass it in: currently channeld and openingd just
fake it by copying the payment point.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There were two bugs: we weren't returning the next from the given
label but the one matching the label, and we were appending new
invoices to the head instead of the tail, which meant we'd be
traversing in the wrong order.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Thought we don't handle it at the moment, nodes can certainly have multiple
addresses, and we should display them all.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't track them accurately when in onchaind, but we don't want to:
onchaind can be restarted at any time.
Once it's all settled, we're clear to clean them up.
Before this, valgrind could complain about deferncing hout->key.peer:
Valgrind error file: valgrind-errors.10876
==10876== Invalid read of size 4
==10876== at 0x41F8AF: peer_on_chain (peer_control.h:127)
==10876== by 0x42340D: notify_new_block (peer_htlcs.c:1461)
==10876== by 0x40A08D: connect_block (chaintopology.c:96)
==10876== by 0x40A96B: topology_changed (chaintopology.c:313)
==10876== by 0x40AC85: add_block (chaintopology.c:384)
==10876== by 0x40ABF0: gather_previous_blocks (chaintopology.c:363)
==10876== by 0x4051B3: process_rawblock (bitcoind.c:410)
==10876== by 0x4044DD: bcli_finished (bitcoind.c:155)
==10876== by 0x454665: destroy_conn (poll.c:183)
==10876== by 0x454685: destroy_conn_close_fd (poll.c:189)
==10876== by 0x45DF89: notify (tal.c:240)
==10876== by 0x45E43A: del_tree (tal.c:400)
==10876== Address 0x6929208 is 2,120 bytes inside a block of size 2,416 free'd
==10876== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==10876== by 0x45E513: del_tree (tal.c:421)
==10876== by 0x45E849: tal_free (tal.c:509)
==10876== by 0x41A8E9: handle_irrevocably_resolved (peer_control.c:1172)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We are announcing that we are willing to accept incoming payments with
current_height + min_final_cltv_expiry + slack, assuming that the
sender adds some slack. In particular we'd reject the payment if
slack=0 which is allowed by the spec.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We save location where transaction was started, in case we try to nest.
There's now no error case; db_exec_mayfail() is the only one.
This means the tests need to override fatal() if they want to intercept
these errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a subset of a "bitcoind: wrap callbacks in transaction." from
the everything-in-transaction branch, but we need the ld pointer now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And nail "make check-source" to that specific version (which is a commit id,
not a branch name, so needs a different syntax for git).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These need to be different for testing the example in BOLT 11.
We also use the cltv_final instead of deadline_blocks in the final hop:
various tests assumed 5 was OK, so we tweak utils.py.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It crashes under valgrind, causing a valgrind error: valgrind gives us a
backtrace anyway, so we don't need it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
ZmnSCPxj
practicalswift
Björge Dijkstra
William Casarin
Igor Cota