"BOLT 4: Remove legacy format, make var_onion_optin compulsory."
This also renamed the redundant "tlv_payload" to "payload", so we
replace "tlv_tlv_payload" with "tlv_payload" everyhere!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are cases (difficult to reproduce with a test) where
a payment will fail one time and succeed later.
As far I understand in this case the groupid field of the payment
is the same, and the only thing that change is the status, so
our logic inside the delpay is ambiguous where it is not
possible to delete a payment as described in https://github.com/ElementsProject/lightning/issues/6114
A sequence of commands that explain the problem is
```
$ lc -k listpays payment_hash=H
{
"pays": [
{
"bolt11": "I",
"destination": "redacted",
"payment_hash": "H",
"status": "complete",
"created_at": redacted,
"completed_at": redacted,
"preimage": "P",
"amount_msat": "redacted",
"amount_sent_msat": "redacted"
}
]
}
$ lc delpay H complete
{
"code": 211,
"message": "Payment with hash H has failed status but it should be complete"
}
```
In this case, the delpay is not able to delete a payment because the
listpays is returning only the succeeded one, so by running the
listsendpays we may see the following result where our delpay logic
will be stuck because it works to ensure that all the payments stored
in the database has the status specified by the user
```
➜ VincentSSD clightning --testnet listsendpays -k payment_hash=7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4
{
"payments": [
{
"id": 322,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 1,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 1664,
"created_at": 1679510203,
"completed_at": 1679510205,
"status": "failed",
"bolt11": "lntb1pjpkj4xsp52trda39rfpe7qtqahx8jjplhnj3tatxy8rh6sc6afgvmdz7n0llspp50lr5hmdm0re0xvcp2hv3nf2wwvx0r8q3h3e7jmqz0awdfg6w206qdp0w3jhxarfdenjqargv5sxgetvwpshjgrzw4njqun9wphhyaqxqyjw5qcqp2rzjqtp28uqy77te96ylt7ek703h4ayldljsf8rnlztgf3p8mg7pd0qzwf8a3yqqpdqqqyqqqqt2qqqqqqgqqc9qxpqysgqgeya2lguaj6sflc4hx2d89jvah8mw9uax4j77d8rzkut3rkm0554x37fc7gy92ws9l76yprdva2lalrs7fqjp9lcx40zuty8gca0g5spme3dup"
},
{
"id": 323,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 2,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 3663,
"created_at": 1679510205,
"completed_at": 1679510207,
"status": "failed"
},
{
"id": 324,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 3,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 3663,
"created_at": 1679510207,
"completed_at": 1679510209,
"status": "failed"
},
{
"id": 325,
"payment_hash": "7fc74bedbb78f2f3330155d919a54e730cf19c11bc73e96c027f5cd4a34e53f4",
"groupid": 1,
"partid": 4,
"destination": "030b686a163aa2bba03cebb8bab7778fac251536498141df0a436d688352d426f6",
"amount_msat": 300,
"amount_sent_msat": 4663,
"created_at": 1679510209,
"completed_at": 1679510221,
"status": "complete",
"payment_preimage": "43f746f2d28d4902489cbde9b3b8f3d04db5db7e973f8a55b7229ce774bf33a7"
}
]
}
```
This commit solves the problem by forcing the delete query in the
database to specify status too, and work around this kind of
ambiguous case.
Fixes: f52ff07558 (lightningd: allow delpay to delete a specific payment.)
Reported-by: Antoine Poinsot <darosior@protonmail.com>
Link: https://github.com/ElementsProject/lightning/issues/6114
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Co-Developed-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: delpay be more pedantic about delete logic by allowing
delete payments by status directly on the database.
It works for the trivial case, where groupid and partid are the same,
but silently deletes nothing in the other cases (or worse, deletes the
wrong entry!).
See: #5835
Changelog-Fixed: `delpay`: actually delete the specified payment (mainly found by `autoclean`).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When a channel is not yet confirmed onchain and only has an alias,
`getroute` will return the alias under the "channel" key. However, if
you supply that to `sendpay`, it will not be able to find the channel
and will fail since it calls `find_channel_for_htlc_add` and that only
looks for channels by their scid and doesn't consider their alias.
This patch makes `find_channel_for_htlc_add` also consider channel
aliases when looking for channels.
Changelog-Fixed: JSON-RPC: `sendpay` now can send to a short-channel-id alias for the first hop.
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don't shoehorn it into onion_nonfinal_hop() and onion_final_hop(), but
provide an explicit routine "blinded_onion_hops" and an onion helper
"onion_blinded_hop()" for it to call.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"sphinx_add_hop" takes a literal hop to include,
"sphinx_add_modern_hop" prepends the length. Now we always prepend a
length, make it clear that the literal version is a shortcut:
* sphinx_add_hop -> sphinx_add_hop_has_length
* sphinx_add_modern_hop -> sphinx_add_hop
In addition, we check that length is actually correct! This means
`createonion` can no longer create legacy or otherwise-invalid onions:
fix tests and update man page to remove legacy usage.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `createonion` no longer allows non-TLV-style payloads.
This is actually what the autoclean plugin wants, especially since
you can't otherwise delete a payment which has failed then succeeded.
But insist on neither or both being specified, at least for now.
Changelog-Added: JSON-RPC: `delpay` takes optional `groupid` and `partid` parameters to specify exactly what payment to delete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows GDB to print values, but also allows us to use them in
'case' statements. This wasn't allowed before because they're not
constant terms.
This also made it clear there's a clash between two error codes,
so move one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: Error code from bcli plugin changed from 400 to 500.
Reported-by: Warren Togami
Changelog-Changed: `sendpay` and `sendonion` now obey the first hop "channel" short_channel_id, if specified.
Changelog-Deprecated: `sendpay` and `sendonion` could take a bogus first hop "channel" short_channel_id
There are hardly any lightningd-specific JSON functions: all that's left
are the feerate ones, and there's already a comment that we should have
a lightningd/feerate.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We have them split over common/param.c, common/json.c,
common/json_helpers.c, common/json_tok.c and common/json_stream.c.
Change that to:
* common/json_parse (all the json_to_xxx routines)
* common/json_parse_simple (simplest the json parsing routines, for cli too)
* common/json_stream (all the json_add_xxx routines)
* common/json_param (all the param and param_xxx routines)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's a deprecation, we simply ignore one, rather than properly
checking they match etc.
Fixes: #5386
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is generally verboten now, since there can be multiple. There are a
few exceptions:
1. We sometimes want to know if there are *any* active channels.
2. Some dev commands still take peer id when they mean channel_id.
3. We still allow peer id when it's fully determined.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `close` by peer id will fail if there is more than one live channel (use `channel_id` or `short_channel_id` as id arg).
As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
We also no longer strip the type off: everyone handles both forms, and
Eclair doesn't strip (and it's easier!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we initialized the payment, the fees are the entire fee-chain
(final hop amount - starting hop amount)
If it's a payment we routed, the fees are the diff between the
inbound htlc and the outbound (net gain by this routing)
Added to database so data persists nicely.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This re-establishes the prior behavior where a `sendpay` or
`sendonion` that'd match a prior payment would cause the prior payment
to be deleted. While we no longer delete prior attempts we now avoid a
primary key collision by incrementing once. This helps us not having
to touch all existing tests, and likely avoids breaking other users
too.
One of the fundamental constraints of the payment groups idea is that
there may only ever be one group in flight at any point in time, so if
we find a group that is in flight, any new `sendpay` or `sendonion`
must match its `groupid`.
This was the main cause of the pay states flip-flopping, since we
reset the status on each attempt any final status is not really
final. Let's keep them around, and provide a stable history.
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This involves removing some fields from the now-misnamed routing.h
datastructures, and various internal messages.
One non-obvious change is to our "keepalive" logic which refreshes
channels every 13 days: instead of using the 'enabled' flag on the
last channel broadcast to decide whether to refresh it, we use the
local connected status directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
An "active" channel may still be CHANNELD_AWAITING_LOCKIN, so have ->scid NULL.
You can only trigger this by trying to sendpay to the node using a
manual route, since routing would never use such a channel.
```
lightningd: FATAL SIGNAL 11 (version v0.10.0-319-g81cbc20-modded)
0x55e79d194e17 send_backtrace
common/daemon.c:39
0x55e79d194ec1 crashdump
common/daemon.c:52
0x7fce2d79920f ???
???:0
0x7fce2d8e16f7 ???
???:0
0x55e79d2019eb tal_dup_
ccan/ccan/tal/tal.c:801
0x55e79d14e1d9 immediate_routing_failure
lightningd/pay.c:365
0x55e79d14fe91 send_payment_core
lightningd/pay.c:1022
0x55e79d150995 send_payment
lightningd/pay.c:1180
0x55e79d151975 json_sendpay
lightningd/pay.c:1462
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Vincenzo Palazzo
Carl Dong
Christian Decker
niftynei
fiatjaf