This adds a `state_change` 'cause' to a channel.
A 'cause' is some initial 'reason' a channel was created or closed by:
/* Anything other than the reasons below. Should not happen. */
REASON_UNKNOWN,
/* Unconscious internal reasons, e.g. dev fail of a channel. */
REASON_LOCAL,
/* The operator or a plugin opened or closed a channel by intention. */
REASON_USER,
/* The remote closed or funded a channel with us by intention. */
REASON_REMOTE,
/* E.g. We need to close a channel because of bad signatures and such. */
REASON_PROTOCOL,
/* A channel was closed onchain, while we were offline. */
/* Note: This is very likely a conscious remote decision. */
REASON_ONCHAIN
If a 'cause' is known and a subsequent state change is made with
`REASON_UNKNOWN` the preceding cause will be used as reason, since a lot
(all `REASON_UNKNOWN`) state changes are a subsequent consequences of a prior
cause: local, user, remote, protocol or onchain.
Changelog-Added: Plugins: Channel closure resaon/cause to channel_state_changed notification
This will allow us to build complex, multi-peer transactions, with
easeTM!
Changelog-Added: EXPERIMENTAL, Plugins: `openchannel_peer_sigs` notification, which contains a peer's signatures for the funding transaction (`opt_dual_fund`)
Prior to this patch update, we expected a client to call
`openchannel_signed` before checking for peer's tx-sigs messages on the
wire.
When moving to a 'multifundchannel' approach, we'll need to be able to
collect sigs from our peers before sending our tx_sigs message. There's
no strict ordering on when tx-sigs messages are sent/received, so this
is fine.
To do this, we go ahead and start up channeld as soon as
commitment_sigs are secured, so that we process incoming tx-sigs from
our peers as soon as we get them.
We need the PSBT to create the finalized tx from once the peer's
tx_signatures are received. Since we're passing the PSBT, we no longer
need the secondary message to be passed, as it was derived from the
PSBT.
Also removes now unused witness serialization code
As the cmd gets freed on a received error, the node id in which we iterate in `process_check_funding_broadcast`
may gets freed while we are using it.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
v2 of channel establishment, in the accpeter case, now sends 2 messages
to our peer after saving the information to disk (our commitment
signatures and our funding transaction signatures)
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means some files get renamed, and I took the opportunity to clarify
our naming (the *d* is important!)
1. channeld/channel_wire.csv -> channeld/channeld_wire.csv
2. channeld/gen_channel_wire.h -> channeld/channeld_wiregen.h
3. enum channel_wire_type -> enum channeld_wire
4. WIRE_CHANNEL_FUNDING_DEPTH -> WIRE_CHANNELD_FUNDING_DEPTH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previously we were annotating every movement with the blockheight of
lightningd at notification time. Which is lossy in terms of info, and
won't be helpful for reorg reconciliation. Here we switch over to
logging chain moves iff they've been confirmed.
Next PR will fix this up for withdrawals, which are currently tagged
with a blockheight of zero, since we log on successful send.
`lightningd` passes in all the known penalty_bases when starting a new
`channeld` instance, which tracks them internally, eventually matching them
with revocations and passing them back to `lightningd` so it can create the
penalty transaction. From here it is just a small step to having `channeld`
also generate the penalty transaction if desired.
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
We currently abuse the added_htlc and failed_htlc messages to tell channeld
about existing htlcs when it restarts. It's clearer to have an explicit
'existing_htlc' type which contains all the information for this case.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of making it ourselves, lightningd does it. Now we only have
two cases of failed htlcs: completely malformed (BADONION), and with
an already-wrapped onion reply to send.
This makes channeld's job much simpler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For incoming htlcs, we need failure details in case we need to
re-xmit them. But for outgoing htlcs, lightningd is telling us it
already knows they've failed, so we just need to flag them failed
and don't need the details.
Internally, we set the ->fail to a dummy non-NULL value; this is
cleaned up next.
This matters for the next patch, which moves onion handling into
lightningd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Break out a method for canceling a channel that will either
loop through contacting the peer to tell them of the error or
just directly cleans up if the peer is currently disconnected.
restrict fundchannel_cancel usage to only the opener side
Changelog-Changed: Only the opener of a fundchannel can cancel the channel open with fundchannel_cancel
We could use sendonion to do this, but it actually takes a different path through
pay, and I wanted to test all of it, so I made a new dev flag.
We currently get upset with the response:
lightningd/pay.c:556: payment_failed: Assertion `!hout->failcode' failed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These messages may be exchanged between the master and any daemon. For now
these are just the daemons that a peer may be attached to at any time since
the first example of this is the custommsg infrastructure.
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A 'Bad commit_sig signature' was reported by @Javier on Telegram and
@DarthCoin. This was between two c-lightning peers, so definitely our fault.
Analysis of this message revealed the signature was using the wrong
feerate. I finally managed to make a test case which triggered this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`shutdown_scriptpubkey[REMOTE]` is original remote_shutdown_scriptpubkey;
`shutdown_scriptpubkey[LOCAL]` is the script used for "to-local" output when `close`. Add the default is generated form `final_key_idx`;
Store `shutdown_scriptpubkey[LOCAL]` into wallet;
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
The math is a bit tricky, so encapsulate it.
Includes the extra 'e' in 'announcable' as noted by @cdecker :)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Michael Schmoock
niftynei
Rusty Russell
Antoine Poinsot
ZmnSCPxj jxPCSnmZ
Christian Decker
Vasil Dimov
trueptolemy