We still close the channel if we *send* an error, but we seem to have hit
another case where LND sends an error which seems transient, so this will
make a best-effort attempt to preserve our channel in that case.
Some test have to be modified, since they don't terminate as they did
previously :(
Changelog-Changed: quirks: We'll now reconnect and retry if we get an error on an established channel. This works around lnd sending error messages that may be non-fatal.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Thanks to @t-bast, who made this possible by interop testing with Eclair!
Changelog-Added: Protocol: can now send and receive TLV-style onion messages.
Changelog-Added: Protocol: can now send and receive BOLT11 payment_secrets.
Changelog-Added: Protocol: can now receive basic multi-part payments.
Changelog-Added: RPC: low-level commands sendpay and waitsendpay can now be used to manually send multi-part payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the final step: we pass the complete fee_states to and from
channeld.
Changelog-Fixed: "Bad commitment signature" closing channels when we sent back-to-back update_fee messages across multiple reconnects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These used to be necessary as we could have feerate changes which
we couldn't track: now we do, we don't need these flags.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The `channel_got_commitsig` we send the lightningd also implies we sent
the revoke_and_ack, as an optimization. It doesn't currently matter,
since channel_sending_revoke_and_ack doesn't do anything important to the
state, but that changes once we start uploading the entire fee_states.
So now we move our state machine *before* sending to lightningd, in
preparation for sending fee_states too.
Unfortunately, we need to marshall the info to send before we
increment the state, as lightningd expects that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also pulls in a new onion error (mpp_timeout). We change our
route_step_decode_end() to always return the total_msat and optional
secret.
We check total_amount (to prohibit mpp), but we do nothing with
secret for now other than hand it to the htlc_accepted hook.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Check behavior for user supplied upfront_shutdown_script via close_to
Header from folded patch 'fix__return__not__iff_well_close_to_the_provided_addr.patch':
fix: return not iff we'll close to the provided addr
I had a report of a 0.7.2 user whose node hadn't appeared on 1ml. Their
node_announcement wasn't visible to my node, either.
I suspect this is a consequence of recent version reducing the amount of
gossip they send, as well as large nodes increasingly turning off gossip
altogether from some peers (as we do). We should ignore timestamp filters
for our own channels: the easiest way to do this is to push them out
directly from gossipd (other messages are sent via the store).
We change channeld to wrap the local channel_announcements: previously
we just handed it to gossipd as for any other gossip message we received
from our peer. Now gossipd knows to push it out, as it's local.
This interferes with the logic in tests/test_misc.py::test_htlc_send_timeout
which expects the node_announcement message last, so we generalize
that too.
[ Thanks to @trueptolmy for bugfix! ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is mainly an internal-only change, especially since we don't
offer any globalfeatures.
However, LND (as of next release) will offer global features, and also
expect option_static_remotekey to be a *global* feature. So we send
our (merged) feature bitset as both global and local in init, and fold
those bitsets together when we get an init msg.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Command format: close id [unilateraltimeout] [destination]
Close the channel with peer {id}, forcing a unilateral
close after {unilateraltimeout} seconds if non-zero, and
the to-local output will be sent to {destination}. If
{destination} isn't specified, the default is the address
of lightningd.
Also change the pylightning:
update the `close` API to support `destination` parameter
WIRE_REQUIRED_CHANNEL_FEATURE_MISSING anticipates a glorious Wumbo future,
and is closer to correct (it's a PERM failure).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a pointer to chainparams, that fails valgrind if we do anything
chain-specific before setting it.
Suggested-by: Rusty Russell <@rustyrussell>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
531c8d7d9b
In this one, we always send my_current_per_commitment_point, though it's
ignored. And we have our official feature numbers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As per BOLT02 #message-retransmission :
if `next_commitment_number` is 1 in both the `channel_reestablish` it sent and received:
- MUST retransmit `funding_locked`
Rather than reaching into data structures, let them register their own
callbacks. This avoids us having to expose "memleak_remove_xxx"
functions, and call them manually.
Under the hood, this is done by having a specially-named tal child of
the thing we want to assist, containing the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the WIRE_FINAL_EXPIRY_TOO_SOON which leaked too much info,
and adds the blockheight to WIRE_INCORRECT_OR_UNKNOWN_PAYMENT_DETAILS.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently send channel_announcement as soon as we and our
peer agree it's 6 blocks deep. In theory, our other peers might
not have seen that block yet though, so delay a little.
This is mitigated by two factors:
1. lnd will stash any "not ready yet" channel_announcements anyway.
2. c-lightning doesn't enforce the 6 depth minimum at all.
We should not rely on other nodes' generosity or laxity, however!
Next release, we can start enforcing the depth limit, and maybe stashing
ones which don't quite make it (or simply enforce depth 5, not 6).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The way we build transactions, serialize them, and compute fees depends on the
chain we are working on, so let's add some context to the transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We track whether each change is affordable as we go;
test_channel_drainage got us so close that the difference mattered; we
hit an assert when we tried to commit the tx and realized we couldn't
afford it.
We should not be trying to add an HTLC if it will result in the funder
being unable to afford it on either the local *or remote* commitments.
Note the test still "fails" because it refuses to send the final
payment.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Subtracting both arbitrarily reduces our capacity, even for ourselves
since the routing logic uses this maximum.
I also changed 'advertise' to 'advertize', since we use american
spelling.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
@pm47 gave a great bug report showing c-lightning sending the same
UPDATE_FEE over and over, with the final surprise result being that we
blamed the peer for sending us multiple empty commits!
The spam is caused by us checking "are we at the desired feerate?" but
then if we can't afford the desired feerate, setting the feerate we
can afford, even though it's a duplicate. Doing the feerate cap before
we test if it's what we have already eliminates this.
But the empty commits was harder to find: it's caused by a heuristic in
channel_rcvd_revoke_and_ack:
```
/* For funder, ack also means time to apply new feerate locally. */
if (channel->funder == LOCAL &&
(channel->view[LOCAL].feerate_per_kw
!= channel->view[REMOTE].feerate_per_kw)) {
status_trace("Applying feerate %u to LOCAL (was %u)",
channel->view[REMOTE].feerate_per_kw,
channel->view[LOCAL].feerate_per_kw);
channel->view[LOCAL].feerate_per_kw
= channel->view[REMOTE].feerate_per_kw;
channel->changes_pending[LOCAL] = true;
}
```
We assume we never send duplicates, so we detect an otherwise-empty
change using the difference in feerates. If we don't set this flag,
we will get upset if we receive a commitment_signed since we consider
there to be no changes to commit.
This is actually hard to test: the previous commit adds a test which
spams update_fee and doesn't trigger this bug, because both sides
use the same "there's nothing outstanding" logic.
Fixes: #2701
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Keeping the uintmap ordering all the broadcastable messages is expensive:
130MB for the million-channels project. But now we delete obsolete entries
from the store, we can have the per-peer daemons simply read that sequentially
and stream the gossip itself.
This is the most primitive version, where all gossip is streamed;
successive patches will bring back proper handling of timestamp filtering
and initial_routing_sync.
We add a gossip_state field to track what's happening with our gossip
streaming: it's initialized in gossipd, and currently always set, but
once we handle timestamps the per-peer daemon may do it when the first
filter is sent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We ask gossipd for the channel_update for the outgoing channel; any other
messages it sends us get queued for later processing.
But this is overzealous: we can shunt those msgs to the peer while
we're waiting. This fixes a nasty case where we have to handle
WIRE_GOSSIPD_NEW_STORE_FD messages by queuing the fd for later.
This then means that WIRE_GOSSIPD_NEW_STORE_FD can be handled
internally inside handle_gossip_msg(), since it's always dealt with
the same, simplifying all callers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add remote_ann_node_sigs and remote_bitcoin_sigs fields in channel_init message;
2. Master add announcement signatures into channel_init message, and send this message to Channeld.
Channeld will initial the channel with this signatures when it reenables the channel.
Channeld sends announcement signatures to Master by this message.
When Channeld receive a new channel announcement msg, (After channel locking)it will sends announcement signatures to Master by this message.
Instead of reading the store ourselves, we can just send them an
offset. This saves gossipd a lot of work, putting it where it belongs
(in the daemon responsible for the specific peer).
MCP bench results:
store_load_msec:28509-31001(29206.6+/-9.4e+02)
vsz_kb:580004-580016(580006+/-4.8)
store_rewrite_sec:11.640000-12.730000(11.908+/-0.41)
listnodes_sec:1.790000-1.880000(1.83+/-0.032)
listchannels_sec:21.180000-21.950000(21.476+/-0.27)
routing_sec:2.210000-11.160000(7.126+/-3.1)
peer_write_all_sec:36.270000-41.200000(38.168+/-1.9)
Signficant savings in streaming gossip:
-peer_write_all_sec:48.160000-51.480000(49.608+/-1.1)
+peer_write_all_sec:35.780000-37.980000(36.43+/-0.81)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
lisa neigut
trueptolemy
darosior
Michael Schmoock
trueptolemy
Simon Vrouwe