Te `sendonion` docs where claiming that the `first_hop` needs to specify a
`channel_id` whereas it should really be the `node_id` of the peer we are
trying to contact.
Changelog-Added: We now install `lightning-hsmtool` for your `hsm_secret` needs.
See: https://github.com/ElementsProject/lightning/issues/3717#issuecomment-644844594
It seems reasonable to add this to the standard install, and to document it properly as well, hopefully we can fill in the documentation better later on.
My node tried to rebuild one of them because it was lagging (I noticed
because mrkd was not installed).
Turns out a few were lagging, and lightning-dev-sendcustommsg.7 was totally
empty!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently 'listfunds' lies, a teensy eeinsy bit, in that it doesn't list
all of the funds in a wallet (it omits reserved wallet UTXOs). This
change makes the reserved outputs visible by listing them in the
'outputs' section along with a new field, 'reserved', which denotes the
UTXO's state
Changelog-Changed: JSON-RPC: `listfunds` 'outputs' now includes reserved outputs, designated as 'reserved' = true
the PPA is no longer maintained, the new hotness is the snapd install.
except that snapd does some weirdness with the binary names, calling it
bitcoin-core.daemon and bitcoin-core.cli. To get around this, you can
create a symbolic link to the snap binaries, which is what we outline
here.
We did not take the value of --commit-fee into account : this removes
the unused option from lightningd and instead registers it in bcli,
where we set the actual feerate of commitment transactions. This also
corrects the documentation.
Changelog-Fixed: config: we now take the --commit-fee parameter into account.
Signed-off-by: Antoine Poinsot <darosior@protonmail.com>
The previous implementation was a bit lazy: in particular, since we didn't
remember the disabled plugins, we would load them on rescan.
Changelog-Changed: config: the `plugin-disable` option works even if specified before the plugin is found.
Previously we've used the term 'funder' to refer to the peer
paying the fees for a transaction; v2 of openchannel will make
this no longer true. Instead we rename this to 'opener', or the
peer sending the 'open_channel' message, since this will be universally
true in a dual-funding world.
The documentation was wrong, and I copied my mistake to `libplugin` where it
was then ignored instead of ORed into the node's featurebits. This fixes both.
As discussed with Christian, prepending the length to the payload returned
is awkward, but it's the only way to set a legacy payload. As this will
be soon deprecated, simplify the external API.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes testing easier, and makes sense: lightningd might not
*know* about other connected channels, depending on gossip, but if the
user specifies it we should obey it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON: `invoice` `exposeprivatechannels` now includes explicitly named channels even if they seem like dead-ends.
We had them split according the separate use-cases:
- testing
- doc-gen
- wire-gen
But that was causing new contributors to miss some dependencies when they
first got hacking. So this consolidates all of our own dependencies in a root
requirements.txt, with the notable exception of `pyln-client`, `pyln-testing`
and `pyln-proto` which are distributed as PyPI modules and therefore have
their own dependencies that need to be tracked in the module root.
Closes#3518
This regroups questions (frequently) seen in Github issues, on IRC, and
also some I've been asked in face to face.
Changelog-Added: doc: An FAQ was added, accessible at https://lightning.readthedocs.io/FAQ.html
Christian wrote the block chain rescaning paragraph.
Lisa corrected my poor english grammar.
Co-Authored-by: Christian Decker <decker.christian@gmail.com>
Co-Authored-by: Lisa Neigut <niftynei@gmail.com>
This is useful in general, but in particular it allows fundchannel to avoid YA
query to figure out if it can wumbo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON: `connect` returns `features` of the connected peer on success.
This cleans up the boutique handling of features, and importantly, it
means that if a plugin says to offer a feature in init, we will now
*accept* that feature.
Changelog-Fixed: Plugins: setting an 'init' feature bit allows us to accept it from peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This restriction was removed from the spec as of
86c2ebcc5973a4133d3ce4d80ae1c203061a1646.
We also fix up some strange formatting in that part of the documentation.
Changelog-changed: We now announce multiple addresses of the same type, if given.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
ChangeLog-Added: New `getsharedsecret` command, which lets you compute a shared secret with this node knowing only a public point. This implements the BOLT standard of hashing the ECDH point, and is incompatible with ECIES.
Before this patch we used to send `double`s over the wire by just
copying them. This is not portable because the internal represenation
of a `double` is implementation specific.
Instead of this, multiply any floating-point numbers that come from
the outside (e.g. JSONs) by 1 million and round them to integers when
handling them.
* Introduce a new param_millionths() that expects a floating-point
number and returns it multipled by 1000000 as an integer.
* Replace param_double() and param_percent() with param_millionths()
* Previously the riskfactor would be allowed to be negative, which must
have been unintentional. This patch changes that to require a
non-negative number.
Changelog-None
the tests are not possible only by having tests/requirements.txt .
Running the whole testsuite also runs contrib/pyln-proto/tests/test_invoice.py
which needs requiremnets of pyln-proto and so on.
Also requirement coincurve requires libsecp256k1-dev headers.
As most developers need all requiremtents and we should tell them.
1. GH_TOKEN is probably required to run the changelog script.
2. Note the footnotes need updating; we no longer have [Unreleased].
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Fixed factual errors in `lightning-listchannels.7` documentation.
`delay` is ***not*** the unilateral close delay for that channel-direction!
Changelog-Changed: The hooks `db_write`, `invoice_payment`, and `rpc_command` now accept `{ "result": "continue" }` to mean "do default action", in addition to `true` (`db_write`), `{}` (`invoice_payment`), and `{"continue": true}` (`rpc_command`). The older "default" indicators are now deprecated and are now recognized only if `--deprecated-apis` is set.
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
* Fix usage of `echo "...\n..."` (without `-e`), generating a
broken output:
```
lightningd-config <lightningd-config.5.md>
lightningd\nlightning-autocleaninvoice.7.md <lightningd.8.md\nlightning-autocleaninvoice.7.md>
```
* Use `$(SORT)` instead of bare `sort` to avoid locale-dependent sort.
* Strip the trailing .[0-9].md without invoking sed.
* Sort all man pages as one block.
Changelog-None
ChangeLog-Fixed: Clarified about connection in documentation. Also, `fundchannel` already `connect`s if your node knows how to contact the desired peer for a few versions now, so clarify documentation about this as well.
Using it with a different value to the amount sent causes a crash in 0.8.0,
which is effectively deprecating it, so let's disallow it now.
Changelog-Changed: If the optional `msatoshi` param to sendpay for non-MPP is set, it must be the exact amount sent to the final recipient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used `int` for error codes. The problem with
`int` is that we try to pass it to/from wire and the size of `int` is
not defined by the standard. So a sender with 4-byte `int` would write
4 bytes to the wire and a receiver with 2-byte `int` (for example) would
read just 2 bytes from the wire.
To resolve this:
* Introduce an error code type with a known size:
`typedef s32 errcode_t`.
* Change all error code macros to constants of type `errcode_t`.
Constants also play better with gdb - it would visualize the name of
the constant instead of the numeric value.
* Change all functions that take error codes to take the new type
`errcode_t` instead of `int`.
* Introduce towire / fromwire functions to send / receive the newly added
type `errcode_t` and use it instead of `towire_int()`.
In addition:
* Remove the now unneeded `towire_int()`.
* Replace a hardcoded error code `-2` with a new constant
`INVOICE_EXPIRED_DURING_WAIT` (903).
Changelog-Changed: The waitinvoice command would now return error code 903 to designate that the invoice expired during wait, instead of the previous -2
Fixes: #3192
Changelog-Added: `waitanyinvoice` now supports a `timeout` parameter, which when set will cause the command to fail when the timeout is reached; can set this to 0 to fail immediately if no new invoice has been paid yet.
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
Now that c-lightning is in the FreeBSD ports system (\o/)
update the installation instructions, which basically boil down
to just `pkg install c-lightning`.
Changelog-None
it's that time of year (merry xmas!)
enables the ability to push_msat on fundchannel
Changelog-Added: RPC: `fundchannel` and `fundchannel_start` can now accept an optional parameter, `push_msat`, which will gift that amount of satoshis to the peer at channel open.
Thanks to @t-bast, who made this possible by interop testing with Eclair!
Changelog-Added: Protocol: can now send and receive TLV-style onion messages.
Changelog-Added: Protocol: can now send and receive BOLT11 payment_secrets.
Changelog-Added: Protocol: can now receive basic multi-part payments.
Changelog-Added: RPC: low-level commands sendpay and waitsendpay can now be used to manually send multi-part payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Christian Decker
ZmnSCPxj jxPCSnmZ
Saibato
niftynei
Glen Cooper
Antoine Poinsot
rbndg
Sebastian Falbesoner
Aiden McClelland
Vasil Dimov
Michael Schmoock
Dave Scotese
Ken Sedgwick
fanquake
minidisk1147