Regenerate from current BOLTS via `make extract-bolt-csv`
1. The remote_addr field was added manually into peer_wire.csv: this
needs to be a patch otherwise it vanishes on regen.
2. We never brought into the channel_disabled fields, because it was
too much hassle (we never actually generate this!). Do it now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
It was tlv_fields_valid that wanted a non-const: now that's gone, we
can make this correctly const.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
More efficient to search a known peer than the whole set.
Also, move find_channel_by_id() from channel_control.c into channel.c
where we'd expect it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Sure, we want to connect (usually) because of an active channel, but
it's not specific to the channel itself.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than intuiting whether this is a new channel / active channel,
use the channel_id. This simplifies things and makes them explicit,
and prepares for multiple live channels per peer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we always have it (either extracted from an unsolicited message,
or told to us by lightningd when it tells us it wants to talk), we can
always send it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't need to hand it to channeld: it will read it! We simply
need to tell it to expect it.
Similarly, openingd/dualopend will never see it, so remove that logic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Either because lightningd tells us it wants to talk, or because the peer
says something about a channel.
We also introduce a behavior change: we disconnect after a failed open.
We might want to modify this later, but we it's a side-effect of openingd
not holding onto idle connections.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The message from lightningd simply acknowleges that we are allowed to
discard the peer (because no subdaemons are talking to it anymore).
This difference becomes more stark once connectd holds on to idle
peers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
As per proposal in https://github.com/lightning/bolts/pull/962
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: protocol: support for legacy onion format removed, since everyone supports the new one.
This is the cheapest algo I came up with that simply checks that the
same `remote_addr` has been report by two different peers. Can be
improved in many ways:
- Check by connecting to a radonm peers in the network
- Check for more than two confirmations or a certain fraction
- ...
Changelog-Added: Send updated node_annoucement when two peers report the same remote_addr.
Instead of doing this weird chaining, just call them all at once and
use a reference counter.
To make it simpler, we return the subd_req so we can hang a destructor
off it which decrements after the request is complete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There is no "wallet_lib_headers" variable in wallet/Makefile
Likewise, there were two "lightningd_headers", a couple of unused
variables and some other nonsene in lightningd/Makefile
This is neater than what we had before, and slightly more general.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON_RPC: `sendcustommsg` now works with any connected peer, even when shutting down a channel.
We also no longer strip the type off: everyone handles both forms, and
Eclair doesn't strip (and it's easier!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With this change, we get more fine-grained error messages if something
goes wrong in the course of communicating with the SQLite database. To
pick some random examples, the error codes SQLITE_IOERR_NOMEM,
SQLITE_IOERR_CORRUPTFS or SQLITE_IOERR_FSYNC are way more specific
than just a plain SQLITE_IOERR, and the corresponding error messages
generated by sqlite3_errstr() will hence give a better hint to the
user (or also to the developers, if an error report is sent) what the
cause for a failure is.
Changelog-None
The blockheight is zero though, since these aren't included in a block
yet.
We also don't issue an 'external' deposit event if we can tell that the
address you're sending to actually belongs to our wallet (we'll issue a
deposit event when it gets included in a block)
It's weird to have connectd ask gossipd, when lightningd can just do it
and hand all the addresses together.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. tal_strndup(.., str, strlen(str)) == tal_strdup()
2. tal_strdup also takes(), so document that.
3. Avoid passing 'struct sha256' on the stack: use ptr.
4. Generally, structures shouldn't keep pointers to things they don't own.
In this case, mvt->node_id.
5. Make payment_hash a pointer, since NULL is more natural than an all-zero
hash.
And add NON_NULL_ARGS() to the functions; it's cumbersome, but make it
fairly clear what params are optional.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Freeing an unconfirmed channel already releases the subd, so don't
do that explicitly.
2. Use channel->owner to transfer ownership where possible, using
channel_set_owner() which handles all the cases.
This simplifies the code and makes it more readable, IMHO.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to stash/save the amount of the lease fees on a leased channel,
we do this by re-using the 'push' amount field on channel (which is
technically correct, since we're essentially pushing the fee amount to
the peer).
Also updates a bit of how the pushes are accounted for (pushed to now
has an event; their channel will open at zero but then they'll
immediately register a push event).
Leases fees are treated exactly the same as pushes, except labeled
differently.
Required adding a 'lease_fee' field to the inflights so we keep track of
the fee for the lease until the open happens.
If we initialized the payment, the fees are the entire fee-chain
(final hop amount - starting hop amount)
If it's a payment we routed, the fees are the diff between the
inbound htlc and the outbound (net gain by this routing)
Added to database so data persists nicely.
we used this originally to suppress duplicate issuance of coin-move
events; we're assuming that any plugin expects duplicate events though
(and knows how to de-dupe them), so we no longer need this logic.
The old model of coin movements attempted to compute fees etc and log
amounts, not utxos. This is not as robust, as multi-party opens and dual
funded channels make it hard to account for fees etc correctly.
Instead, we move towards a 'utxo' view of the onchain events. Every
event is either the creation or 'destruction' of a utxo. For cases where
the value of the utxo is not (fully) debited/credited to our account, we
also record the output_value. E.g. channel closings spend a utxo who's
entire value we may not own.
Since we're now tracking UTXOs onchain, we can now do more complex
assertions about the onchain footprint of them. The integration tests
have been updated to now use more 'chain aware' assertions about the
ending state.
The only thing that needs ld->wallet after this is destroy_invoices_waiter (off jsonrpc)
Could not find any other destructors (destroy_*) that need wallet or db access after this.
Any db access would now segfault.
Rusty Russell
Ken Sedgwick
Michael Schmoock
niftynei
Sebastian Falbesoner
ZmnSCPxj jxPCSnmZ
Simon Vrouwe
Andrew Toth