With enable-autotor-v2 defined in cmdline the default behavior to create
v3 onions with the tor service call, is set to v2 onions.
Signed-off-by: Saibato <saibato.naga@pm.me>
I was seeing some accidental pruning under load / Travis, and in
particular we stopped accepting channel_updates because they were 103
seconds old. But making it too long makes the prune test untenable,
so restore a separate flag that this test can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should never open more than 1024 file descriptors anyway, and under some
situations, namely running as root or in docker, would give us huge
allowances. This then results in a huge, unneeded, cleanup for subprocesses,
which we use a lot.
Fixes#2977
The math is a bit tricky, so encapsulate it.
Includes the extra 'e' in 'announcable' as noted by @cdecker :)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will let gossipd be more intelligent about gossiping before we're
synced, and also it might know how far behind we are.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Will be demuxed into starting the selected DB backend in one of the next
commits. Defaults to the old database location.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's generally clearer to have simple hardcoded numbers with an
#if DEVELOPER around it, than apparent variables which aren't, really.
Interestingly, our pruning test was always kinda broken: we have to pass
two cycles, since l2 will refresh the channel once to avoid pruning.
Do the more obvious thing, and cut the network in half and check that
l1 and l3 time out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The simplest case is to explicitly load it when we see it's been
set.
This involves neatening the default config setup, to remove it from
opt_parse_from_config() and into the caller. It also seems we don't
need to call it anymore before parsing early options: none of them
need ld->config set.
Closes: #3030
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are some more #if DEVELOPER one-liners coming, this makes them
clear, but still lets them stand out.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
(The json when sendpay successes is too different when sendpay fails, so
divide the sendpay result into two notifications: `sendpay_success` and
`sendpay_failure`)
`sendpay_failure`
A notification for topic `sendpay_failure` is sent every time a sendpay
success(with `failed` status). The json is same as the return value of
command `sendpay`/`waitsendpay` when this cammand fails.
```json
{
"sendpay_failure": {
"code": 204,
"message": "failed: WIRE_UNKNOWN_NEXT_PEER (reply from remote)",
"data": {
"id": 2,
"payment_hash": "9036e3bdbd2515f1e653cb9f22f8e4c49b73aa2c36e937c926f43e33b8db8851",
"destination": "035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d",
"msatoshi": 100000000,
"amount_msat": "100000000msat",
"msatoshi_sent": 100001001,
"amount_sent_msat": "100001001msat",
"created_at": 1561395134,
"status": "failed",
"erring_index": 1,
"failcode": 16394,
"failcodename": "WIRE_UNKNOWN_NEXT_PEER",
"erring_node": "022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59",
"erring_channel": "103x2x1",
"erring_direction": 0
}
}
}
```
`sendpay` doesn't wait for the result of sendpay and `waitsendpay`
returns the result of sendpay in specified time or timeout, but
`sendpay_failure` will always return the result anytime when sendpay
fails if is was subscribed.
pPayment field includes the basic information of the payment, so the return valves of 'sendpay_success()' and 'sendpay_fail()' should include this field.
Note "immediate_routing_failure" is before payment creation, and for this case, return won't include payment fields.
`sendpay_success`
A notification for topic `sendpay_success` is sent every time a sendpay
success(with `complete` status). The json is same as the return value of
command `sendpay`/`waitsendpay` when these cammand succeeds.
```json
{
"sendpay_success": {
"id": 1,
"payment_hash": "5c85bf402b87d4860f4a728e2e58a2418bda92cd7aea0ce494f11670cfbfb206",
"destination": "035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d",
"msatoshi": 100000000,
"amount_msat": "100000000msat",
"msatoshi_sent": 100001001,
"amount_sent_msat": "100001001msat",
"created_at": 1561390572,
"status": "complete",
"payment_preimage": "9540d98095fd7f37687ebb7759e733934234d4f934e34433d4998a37de3733ee"
}
}
```
`sendpay` doesn't wait for the result of sendpay and `waitsendpay`
returns the result of sendpay in specified time or timeout, but
`sendpay_success` will always return the result anytime when sendpay
successes if is was subscribed.
531c8d7d9b
In this one, we always send my_current_per_commitment_point, though it's
ignored. And we have our official feature numbers.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This moves field initialization into plugins_new(), and
adds a memleak helper to search the request map:
=================================== ERRORS ====================================
___________________ ERROR at teardown of test_plugin_command ___________________
[gw0] linux -- Python 3.7.1 /opt/python/3.7.1/bin/python3.7
> lambda: ihook(item=item, **kwds),
when=when,
)
../../../.local/lib/python3.7/site-packages/flaky/flaky_pytest_plugin.py:306:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
tests/fixtures.py:112: in node_factory
ok = nf.killall([not n.may_fail for n in nf.nodes])
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
self = <utils.NodeFactory object at 0x7f873b245278>, expected_successes = [True]
def killall(self, expected_successes):
"""Returns true if every node we expected to succeed actually succeeded""
unexpected_fail = False
for i in range(len(self.nodes)):
leaks = None
# leak detection upsets VALGRIND by reading uninitialized mem.
# If it's dead, we'll catch it below.
if not VALGRIND:
try:
# This also puts leaks in log.
leaks = self.nodes[i].rpc.dev_memleak()['leaks']
except Exception:
pass
try:
self.nodes[i].stop()
except Exception:
if expected_successes[i]:
unexpected_fail = True
if leaks is not None and len(leaks) != 0:
raise Exception("Node {} has memory leaks: {}".format(
self.nodes[i].daemon.lightning_dir,
> json.dumps(leaks, sort_keys=True, indent=4)
))
E Exception: Node /tmp/ltests-qm87my20/test_plugin_command_1/lightnng-1/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:437 (tal_alloc_)",
E "lightningd/jsonrpc.c:1112 (jsonrpc_request_start_)",
E "lightningd/plugin.c:1041 (plugin_config)",
E "lightningd/plugin.c:1072 (plugins_config)",
E "lightningd/plugin.c:846 (plugin_manifest_cb)",
E "lightningd/plugin.c:252 (plugin_response_handle)",
E "lightningd/plugin.c:342 (plugin_read_json_one)",
E "lightningd/plugin.c:367 (plugin_read_json)",
E "ccan/ccan/io/io.c:59 (next_plan)",
E "ccan/ccan/io/io.c:407 (do_plan)",
E "ccan/ccan/io/io.c:417 (io_ready)",
E "ccan/ccan/io/poll.c:445 (io_loop)",
E "lightningd/io_loop_with_timers.c:24 (io_loop_with_tiers)",
E "lightningd/lightningd.c:840 (main)"
E ],
E "label": "lightningd/jsonrpc.c:1112:struct jsonrpc_reques",
E "parents": [
E "lightningd/plugin.c:66:struct plugin",
E "lightningd/lightningd.c:103:struct lightningd"
E ],
E "value": "0x55d6385e4088"
E },
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:437 (tal_alloc_)",
E "lightningd/jsonrpc.c:1112 (jsonrpc_request_start_)",
E "lightningd/plugin.c:1041 (plugin_config)",
E "lightningd/plugin.c:1072 (plugins_config)",
E "lightningd/plugin.c:846 (plugin_manifest_cb)",
E "lightningd/plugin.c:252 (plugin_response_handle)",
E "lightningd/plugin.c:342 (plugin_read_json_one)",
E "lightningd/plugin.c:367 (plugin_read_json)",
E "ccan/ccan/io/io.c:59 (next_plan)",
E "ccan/ccan/io/io.c:407 (do_plan)",
E "ccan/ccan/io/io.c:417 (io_ready)",
E "ccan/ccan/io/poll.c:445 (io_loop)",
E "lightningd/io_loop_with_timers.c:24 (io_loop_with_tiers)",
E "lightningd/lightningd.c:840 (main)"
E ],
E "label": "lightningd/jsonrpc.c:1112:struct jsonrpc_reques",
E "parents": [
E "lightningd/plugin.c:66:struct plugin",
E "lightningd/lightningd.c:103:struct lightningd"
E ],
E "value": "0x55d6386529d8"
E }
E ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than reaching into data structures, let them register their own
callbacks. This avoids us having to expose "memleak_remove_xxx"
functions, and call them manually.
Under the hood, this is done by having a specially-named tal child of
the thing we want to assist, containing the callback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a much stronger consistency check from the combination of
transaction wrapping, tal memory leak detection. Tramsaction wrapping ensures
that each statement is executed before the transaction is committed. The
commit is also driven by the `io_loop`, which means that it is no longer
possible for us to have statements outside of transactions and transactions
are guaranteed to commit at the round's end.
By adding the tal-awareness we can also get a much better indication as to
whether we have un-freed statements flying around, which we can test at the
end of the round as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We will soon generalize the DB, so directly reaching into the `struct db`
instance to talk to the sqlite3 connection is bad anyway. This increases
flexibility and allows us to tailor the actual implementation to the
underlying DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This removes the WIRE_FINAL_EXPIRY_TOO_SOON which leaked too much info,
and adds the blockheight to WIRE_INCORRECT_OR_UNKNOWN_PAYMENT_DETAILS.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently end up sleeping for 1 second for channeld and gossipd:
better to use a normal blocking waitpid and an alarm to wake us in
case they don't exit.
This speeds up `lightning-cli stop` on my machine from 2.008s to 0.008s:
a 286 times speedup!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
During sync it is highly likely that we can coalesce multiple calls and share
results among them. We also report back failures for non-existing blocks early
on, so we don't run into issues with blocks that our bitcoind doesn't have
yet.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was caused by us not checking against the max_blockheight, but rather the
min_blockheight which can be negative with a newly created node. This is still
safe since we check for duplicates anyway in `wallet_filteredblock_add`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is probably worth preventing.
1. Our depth estimate would be inaccurate possibly leading to us
timing out too early.
2. If we're not up-to-date our onchain funds are unknown.
3. We wouldn't be able to send or receive HTLCs until we're synced anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to still allow incoming connections, and reestablishment of
channels, but if one tries to give us an HTLC, stall until we're
synced.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we don't know block height, we shouldn't be sending HTLCs. This
stops us forwarding HTLCs as well as new payments.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I suspect multiple plugins trying to connect at the same
time are overrunning the 1-deep listen queue:
From man listen(2):
The backlog argument defines the maximum length to which the queue of
pending connections for sockfd may grow. If a connection request ar‐
rives when the queue is full, the client may receive an error with an
indication of ECONNREFUSED
Fixes: #2922
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`close` takes two optional arguments: `force` and `timeout`.
`timeout` doesn't timeout the close (there's no way to do that), just
the JSON call. `force` (default `false`) if set, means we unilaterally
close at the timeout, instead of just failing.
Timing out JSON calls is generally deprecated: that's the job of the
client. And the semantics of this are confusing, even to me! A
better API is a timeout which, if non-zero, is the time at which we
give up and unilaterally close.
The transition code is awkward, but we'll manage for the three
releases until we can remove it.
The new defaults are to unilaterally close after 48 hours.
Fixes: #2791
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we were to just insert filtered blocks in the range that we will scan later
we'd be hitting the uniqueness constraints later.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Instead of allowing all calls to `getfilteredblock` to be scheduled on the
`bitcoind` queue right away we instead add them in a separate queue, and
process a single call at a time. This limits the concurrency and avoids
thrashing `bitcoind`. At the same time we dispatch incoming results back to
all calls that were queued for that particular blockheight, reducing the
overall number of calls and an increase in overall speed.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We will be calling the callback out of order once we fan out the results of a
single lookip to multiple calls, so being sure that everything is allocated
ahead of time is necessary.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we now check all P2WSH outputs in a block, this is getting quite a
common occurence, so logging just produces lots of noise.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will eventually replace the multi-step `getblockhash` + `getblock` +
`gettxout` mechanism, and return entire filtered blocks which can be added to
the DB, and represent the full set of P2WSH UTXOs.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was causing `--help` to fail if we already had a `lightningd` running
with the same `--lightning-dir`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
1. Now checking the pid file really does precede touching the db and
starting plugins, which is far safer.
2. Crashlog is now activated just after daemon parent release, and just
before the main loop, which means no "crash" on startup if we call fatal().
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Dumb programs which have a --daemon option call fork() early. This is
terrible UX since startup errors get lost: the program exits with
"success" immediately then you discover via the logs that it didn't
start at all.
However, forking late introduced a heap of problems with changing
pids. Instead, fork early but keep stderr and the parent around: if
we fail early on, the parent fails with us. We release our parent
with an explicit action just before the main loop.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we are walking the entire allocation tree anyway, and access the tal
metadata anyway, we can just as well also track the size of the memory
allocations to simplify debugging of memory use.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Otherwise it creates the lightning-dir. This can't be helped for --help
(at least, if plugins are present), but --version simply prints and exits.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that we move adding the plugin to the plugins list to the end, otherwise
the hook from logging can examine the (uninitialized) plugin.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is easy since we did the option parsing cleanup, but it has the
effect that plugins are launched from the lightning-dir. Now
we have dynamic plugins, this means startup and post-startup plugins
experience the same environment.
This is absolutely a desirable thing: they can just drop files in
their cwd rather than having to move (including, I might note, core
files!).
We also highlight the change in various places (and a drive-up update
of PLUGINS.md which says you have to use --plugin).
The next patch adds a backwards compatibility wedge for old users of
relative plugin paths.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently send channel_announcement as soon as we and our
peer agree it's 6 blocks deep. In theory, our other peers might
not have seen that block yet though, so delay a little.
This is mitigated by two factors:
1. lnd will stash any "not ready yet" channel_announcements anyway.
2. c-lightning doesn't enforce the 6 depth minimum at all.
We should not rely on other nodes' generosity or laxity, however!
Next release, we can start enforcing the depth limit, and maybe stashing
ones which don't quite make it (or simply enforce depth 5, not 6).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In file included from wallet/test/run-wallet.c:15:0:
./lightningd/peer_htlcs.c: In function ‘htlcs_reconnect’:
./lightningd/peer_htlcs.c:2060:15: error: ‘failcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
} else if (failcode) {
^~~~~~~~
./lightningd/peer_htlcs.c:2056:19: error: ‘failcode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
failcode != 0
~~~~~~~~~^~~~
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`forward_event`
A notification for topic `forward_event` is sent every time the status
of a forward payment is set. The json format is same as the API
`listforwards`.
```json
{
"forward_event": {
"payment_hash": "f5a6a059a25d1e329d9b094aeeec8c2191ca037d3f5b0662e21ae850debe8ea2",
"in_channel": "103x2x1",
"out_channel": "103x1x1",
"in_msatoshi": 100001001,
"in_msat": "100001001msat",
"out_msatoshi": 100000000,
"out_msat": "100000000msat",
"fee": 1001,
"fee_msat": "1001msat",
"status": "settled",
"received_time": 1560696342.368,
"resolved_time": 1560696342.556
}
}
```
or
```json
{
"forward_event": {
"payment_hash": "ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff",
"in_channel": "103x2x1",
"out_channel": "110x1x0",
"in_msatoshi": 100001001,
"in_msat": "100001001msat",
"out_msatoshi": 100000000,
"out_msat": "100000000msat",
"fee": 1001,
"fee_msat": "1001msat",
"status": "local_failed",
"failcode": 16392,
"failreason": "WIRE_PERMANENT_CHANNEL_FAILURE",
"received_time": 1560696343.052
}
}
```
- The status includes `offered`, `settled`, `failed` and `local_failed`,
and they are all string type in json.
- When the forward payment is valid for us, we'll set `offered`
and send the forward payment to next hop to resolve;
- When the payment forwarded by us gets paid eventually, the forward
payment will change the status from `offered` to `settled`;
- If payment fails locally(like failing to resolve locally) or the
corresponding htlc with next hop fails(like htlc timeout), we will
set the status as `local_failed`. `local_failed` may be set before
setting `offered` or after setting `offered`. In fact, from the
time we receive the htlc of the previous hop, all we can know the
cause of the failure is treated as `local_failed`. `local_failed`
only occuors locally or happens in the htlc between us and next hop;
- If `local_failed` is set before `offered`, this
means we just received htlc from the previous hop and haven't
generate htlc for next hop. In this case, the json of `forward_event`
sets the fields of `out_msatoshi`, `out_msat`,`fee` and `out_channel`
as 0;
- Note: In fact, for this case we may be not sure if this incoming
htlc represents a pay to us or a payment we need to forward.
We just simply treat all incoming failed to resolve as
`local_failed`.
- Only in `local_failed` case, json includes `failcode` and
`failreason` fields;
- `failed` means the payment forwarded by us fails in the
latter hops, and the failure isn't related to us, so we aren't
accessed to the fail reason. `failed` must be set after
`offered`.
- `failed` case doesn't include `failcode` and `failreason`
fields;
- `received_time` means when we received the htlc of this payment from
the previous peer. It will be contained into all status case;
- `resolved_time` means when the htlc of this payment between us and the
next peer was resolved. The resolved result may success or fail, so
only `settled` and `failed` case contain `resolved_time`;
- The `failcode` and `failreason` are defined in [BOLT 4][bolt4-failure-codes].
Warp this process as a new function: 'void json_format_forwarding_object()'. This function will be used in 'forward_event' next, and can ensure the consistent json object structure for forward_payment between 'listforwards' API and 'forward_event' notification.
The reason lnd was sending sync error was that we were taking more than
30 seconds to send the channel_reestablish after connect. That's
understandable on my test node under valgrind, but shouldn't happen normally.
However, it seems it has at least once,
(see https://github.com/ElementsProject/lightning/issues/2847)
: space out startup so it's less likely to happen.
Suggested-by: @cfromknecht
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the other origin, besides `bitcoin_tx`, where we create `bitcoin_tx`
instances, so add the context as soon as possible. Sadly I can't weave the
chainparams into the deserialization code since that'd need to change all the
generated wire code as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The way we build transactions, serialize them, and compute fees depends on the
chain we are working on, so let's add some context to the transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is just taking the existing serialization code and repackaging it in a
more useful form.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This adds a new pair of files : lightningd/plugin_control, along with a new RPC
command : 'plugin'. This command can be used to manage plugins without restarting lightningd:
lightning-cli plugin start helloworld.py
lightning-cli plugin stop helloworld.py
This adds 'plugin_unregister_hook' and 'plugin_unregister_hook_all'
functions to unregister a given hook a plugin registered, or all hooks a
plugin registered for. Since hooks can only be registered once, it's
useful in the case a new plugin is added which would be prefered for
hook registration over an already loaded plugin.
This adds a 'configured' boolean member to the plugin struct so that we can add plugins to ld->plugins' list and differenciate fresh plugins.
This also adds 'plugins_start' so that new plugins can be started without calling 'plugins_init' and running an io loop
It assumes the head of the array is the object/array we want to remove from,
but that's not true if we're trying to remove from a sub-object.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No code changes, just move.
Put all the dev options into the one function, and register (and
comment on) the early args first.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed that --network=regtest didn't override 'network=bitcoin' in
the config file.
Normally we parse the config file first, then the commandline (so the cmdline
wins). But for early options, we do cmdline first so we can find the config
file. That was fine when the only early option was the location of the
config file, but now it includes plugins and the network setting.
So do a boutique cmdline parse *just* to find the config file, then parse
the config file early options, then the cmdline early options.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the moment we simply get a crypto log line on exit:
bitcoin-cli getblockchaininfo: invalid response
Fixes: 6deed77d88
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec says to close the channel if they send us an error, but we
need to be more lenient to preserve channels with other
implementations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We normally reconnect after 1 second: have a flag to say wait for
60. This will be used in the next patch which handles "soft" errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'channel_fail_transient_slowretry.patch':
fixup! lightningd: add slow_reconnect flag for transient failure.
@ZmnSCPxj points out that function is unsafe, since omitting the bool
parameter still compiled. Make it two separate functions, each
with a distinctive name so every caller has to be fixed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's only one caller which used the flag.
As a side-effect, now we'll try reconnect even if the previous owner
was NULL (which mainly effects the case where we couldn't create the subd).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I mean, we still crash, but we give an error now :)
lightningd: FATAL SIGNAL 11 (version v0.7.1-82-g92c38a0)
0x5592e75e19c8 send_backtrace
common/daemon.c:40
0x5592e75e1a6e crashdump
common/daemon.c:53
0x7fad1514ef5f ???
???:0
0x5592e75b2f3a io_loop_with_timers
lightningd/io_loop_with_timers.c:29
0x5592e75d8a54 plugins_init
lightningd/plugin.c:1018
0x5592e75b8e22 main
lightningd/lightningd.c:671
0x7fad15131b6a ???
???:0
0x5592e75a10f9 ???
???:0
0xffffffffffffffff ???
???:0
Segmentation fault (core dumped)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Our previous param support was a bit limited in this case.
We create a dev- command multiplexer, so we can exercise it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
updates the bolt version to 6639cef095a2ecc7b8f0c48c6e7f2f906fbfbc58.
this requires us to use the new bolt parser at generate-bolt.py
and updates to all of the type specifications (ie. from u8 -> byte)
test_funding_cancel_race explicitly attempts to trigger this via a race
condition; this conflicts with our post-test checks that no broken
logs were logged. as a middle ground, we log it as unusual, not broken,
as it's possible for it to attempt to fail if it was begun at the same
time as the complete is.
It probably doesn't matter to "fundchannel_cancel" exactly why the
fundchannel didn't work (though it can read the error msg), and we
should always fail any pending fundchannel_complete command.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of taking over the ->cmd pointer, append ourselves to a list
of cancels. This fixes the test_funding_cancel_race.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
At the beginning of the lightningd, we use "echo" command to check if bitcoin-cli is running.
Now we raplace "echo" with "getblockchaininfo" for this check, and also check whether the "chain" field in response is same as the blockchain that lightningd is on.
"getblockchaininfo" is also valid for litecoin-cli.
1. bcli_args_direct() will be used in wait_for_bitcoind;
At the beginning, we check if bitcoin-cli is running by "echo" command
whitout any bitcoin_cli struction. If this first command fails, we need
present the agrs gathered, like "-rpcuser", like "-rpcpassword".
Related changes include:
i) rename bcli_args() to bcli_args_direct(), and use 'const char **'
as the paramater for bcli_args_direct();
ii) add a new function bcli_args() warpped on bcli_args_direct(), this
warpping can reduce the large number of changes later in the file;
2. bcli_args() warpping on bcli_args_direct() is used like original.
And clean up some dev ones which actually happen (mainly by calling
channel_fail_permanent which logs UNUSUAL, rather than
channel_internal_error which logs BROKEN).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now have a couple of long-lived dependents it is time we stop
removing channels from the table once they are fully closed, and instead just
mark them as closed. This allows us to keep forwards and transactions foreign
keys intact, and it may help us debug things after the fact.
Fixes#2028
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Instead of deleting the channels we will simple mark them as `CLOSED` from now
on. This is needed for some of the other tables not to end up with dangling
references that would otherwise survive the channel lifetime, e.g., forwards
and transactions.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x7ff02889063e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c63e)
#1 0x555ce2ad8d2e in htable_default_alloc ccan/ccan/htable/htable.c:19
#2 0x555ce2ad9698 in double_table ccan/ccan/htable/htable.c:226
#3 0x555ce2ad9b62 in htable_add_ ccan/ccan/htable/htable.c:331
#4 0x555ce2a638e4 in htlc_in_map_add lightningd/htlc_end.h:113
#5 0x555ce2a63beb in connect_htlc_in lightningd/htlc_end.c:39
#6 0x555ce2a85cbc in channel_added_their_htlc lightningd/peer_htlcs.c:1382
#7 0x555ce2a860e1 in peer_got_commitsig lightningd/peer_htlcs.c:1466
#8 0x555ce2a5db04 in channel_msg lightningd/channel_control.c:228
#9 0x555ce2a8d393 in sd_msg_read lightningd/subd.c:474
#10 0x555ce2ada157 in next_plan ccan/ccan/io/io.c:59
#11 0x555ce2adacd4 in do_plan ccan/ccan/io/io.c:407
#12 0x555ce2adad12 in io_ready ccan/ccan/io/io.c:417
#13 0x555ce2adcd67 in io_loop ccan/ccan/io/poll.c:445
#14 0x555ce2a67c66 in io_loop_with_timers lightningd/io_loop_with_timers.c:24
#15 0x555ce2a6e56b in main lightningd/lightningd.c:822
#16 0x7ff028242b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Direct leak of 64 byte(s) in 1 object(s) allocated from:
#0 0x7f4dc279163e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c63e)
#1 0x564ee8a24bb1 in htable_default_alloc ccan/ccan/htable/htable.c:19
#2 0x564ee8a2551b in double_table ccan/ccan/htable/htable.c:226
#3 0x564ee8a259e5 in htable_add_ ccan/ccan/htable/htable.c:331
#4 0x564ee89a5300 in block_map_add lightningd/chaintopology.h:83
#5 0x564ee89a6ece in add_tip lightningd/chaintopology.c:626
#6 0x564ee89a72c3 in have_new_block lightningd/chaintopology.c:694
#7 0x564ee89a3ab0 in process_rawblock lightningd/bitcoind.c:466
#8 0x564ee89a2fb4 in bcli_finished lightningd/bitcoind.c:214
#9 0x564ee8a284d6 in destroy_conn ccan/ccan/io/poll.c:244
#10 0x564ee8a284f6 in destroy_conn_close_fd ccan/ccan/io/poll.c:250
#11 0x564ee8a34a0d in notify ccan/ccan/tal/tal.c:235
#12 0x564ee8a34efc in del_tree ccan/ccan/tal/tal.c:397
#13 0x564ee8a35288 in tal_free ccan/ccan/tal/tal.c:481
#14 0x564ee8a26cf5 in io_close ccan/ccan/io/io.c:450
#15 0x564ee8a28c11 in io_loop ccan/ccan/io/poll.c:449
#16 0x564ee89b3c3b in io_loop_with_timers lightningd/io_loop_with_timers.c:24
#17 0x564ee89ba540 in main lightningd/lightningd.c:822
#18 0x7f4dc2143b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7f4c84ce4448 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c448)
#1 0x55d11b77d270 in strmap_add_ ccan/ccan/strmap/strmap.c:90
#2 0x55d11b704603 in command_set_usage lightningd/jsonrpc.c:891
#3 0x55d11b733cb5 in param common/param.c:295
#4 0x55d11b6f7b37 in json_connect lightningd/connect_control.c:96
#5 0x55d11b7042ef in setup_command_usage lightningd/jsonrpc.c:841
#6 0x55d11b70443b in jsonrpc_command_add_perm lightningd/jsonrpc.c:863
#7 0x55d11b704533 in jsonrpc_setup lightningd/jsonrpc.c:876
#8 0x55d11b705695 in new_lightningd lightningd/lightningd.c:210
#9 0x55d11b706062 in main lightningd/lightningd.c:644
#10 0x7f4c84696b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Direct leak of 1024 byte(s) in 2 object(s) allocated from:
#0 0x7f4c84ce4448 in malloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10c448)
#1 0x55d11b782c96 in timer_default_alloc ccan/ccan/timer/timer.c:16
#2 0x55d11b7832b7 in add_level ccan/ccan/timer/timer.c:166
#3 0x55d11b783864 in timer_fast_forward ccan/ccan/timer/timer.c:334
#4 0x55d11b78396a in timers_expire ccan/ccan/timer/timer.c:359
#5 0x55d11b774993 in io_loop ccan/ccan/io/poll.c:395
#6 0x55d11b72322f in plugins_init lightningd/plugin.c:1013
#7 0x55d11b7060ea in main lightningd/lightningd.c:664
#8 0x7f4c84696b6a in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x26b6a)
To fix this, we actually make 'ld->timers' a pointer, so we can clean
it up last of all. We can't free it before ld, because that causes
timers to be destroyed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was working on rewriting our (somewhat chaotic) tx watching code
for 0.7.2, when I found this bug: we don't always notice the funding
tx in corner cases where more than one block is detected at
once.
This is just the one commit needed to fix the problem: it has some
unnecessary changes, but I'd prefer not to diverge too far from my
cleanup-txwatch branch.
Fixes: #2352
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we ever do this, we'd end up with an unspendable commitment tx anyway.
It might be able to happen if we have htlcs added from the non-fee-paying
party while the fees are increased, though. But better to close the
channel and get a report about it if that happens.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to produce these, but they're invalid. When we switched to
libwally it (correctly) refuses to get a txid for them.
Fixes: #2772Fixes: #2759
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It needs this in compat mode to detect old (pre-0.6.3) end of JSON.
But it always does the first command in compat mode.
This was never really reliable, since the first command could be to
a plugin for which we simply pass through the JSON (though, carefully
appending the expected '\n\n' if not already there).
Reported-by: @laanwj
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
That was changed to start the response object, which broke the openingd
code once we merged.
Of course, I should have *renamed it* when I changed the semantic!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Compile broke because we were using low-level JSON primitives here
(which, incidentally, would produce bad JSON now, since we can't just
put a raw string inside an object!).
Use json_add_string, which also has the benefit of escaping JSON
for us.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Big wiring re-org for funding-continue
In openingd, we move the 'persistent' state (their basepoints,
pubkey, and the minimum_depth requirement for the opening tx) into
the state object. We also look to keep code-reuse between
'continue' and normal 'fundchannel' as high as possible. Both
of these call the same 'fundchannel_reply' at the end.
In opening_control.c, we remap fundchannel_reply such that it is
now aware of the difference between an external/internally funded
channel open. It's the same return path, with the difference that
one finishes making and broadcasting the funding transaction; the
other is skips this.
Add an RPC method (not working at the moment) called
`fundchannel_continue` that takes as its parameters a
node_id and a txid for a transaction (that ostensibly has an output
for a channel)
Some channels won't be opened with a wtx struct, so keep
the total funding amount separate from it so we can
show some stats for listpeers.
Note that we're going to need to update/confirm this once
the transaction gets confirmed.
For the `fundchannel_cancel` we're going to want
to 'successfully' fail a funding channel operation. This allows
us to report it a failure back as an RPC success, instead of
automatically failing the RPC request.
We're going to need this for P2WSH scripts. pull it out into
a common file plus adopt the sanity checks so that it will allow for
either P2WSH or P2WPKH (previously only encoded P2WPKH scripts)
This is an old bug, where a plugin can get called while we're shutting
down (and have freed plugins), but it's triggered more reliably by the
new warning notification hook.
For good measure, we also make freeing a plugin self-delete.
Valgrind error file: valgrind-errors.16763
==16886== Invalid read of size 8
==16886== at 0x422919: plugins_notify (plugin.c:1096)
==16886== by 0x413919: notify_warning (notification.c:61)
==16886== by 0x412BDE: logv (log.c:251)
==16886== by 0x412A98: log_ (log.c:311)
==16886== by 0x4044BE: bcli_finished (bitcoind.c:178)
==16886== by 0x459480: destroy_conn (poll.c:244)
==16886== by 0x459499: destroy_conn_close_fd (poll.c:250)
==16886== by 0x4619E1: notify (tal.c:235)
==16886== by 0x461A7E: del_tree (tal.c:397)
==16886== by 0x461AB5: del_tree (tal.c:407)
==16886== by 0x461AB5: del_tree (tal.c:407)
==16886== by 0x461AB5: del_tree (tal.c:407)
==16886== Address 0x634a578 is 40 bytes inside a block of size 352 free'd
==16886== at 0x4C2EDEB: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==16886== by 0x461AFD: del_tree (tal.c:416)
==16886== by 0x461FB7: tal_free (tal.c:481)
==16886== by 0x411E0A: main (lightningd.c:841)
==16886== Block was alloc'd at
==16886== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==16886== by 0x4617CE: allocate (tal.c:245)
==16886== by 0x461E4C: tal_alloc_ (tal.c:423)
==16886== by 0x42255E: plugins_new (plugin.c:106)
==16886== by 0x41133D: new_lightningd (lightningd.c:218)
==16886== by 0x411AD4: main (lightningd.c:649)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a painpoint with testing, that there's a noticable delay between
"Shutting down" from lightning-cli and being able to restart lightningd.
This fixes that by creating a canned response for this case, which is
simply written out immediately before exit. At this point, the pidfile
has been deleted, the sockets have been closed, and the database
has been closed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Move it closer to ccan/json_out, in preparation for using that as a
replacement.
In particular:
1. Add a 'quote' field in json_add_member.
2. json_add_member now always escapes if 'quote' is true.
3. json_member_direct is exposed to allow avoiding of escaping.
4. json_add_hex can use this, so no longer needs to be in json_stream.c.
5. We don't make JSON manually, but always use helpers.
6. We now flush the stream (wake reader) only when we close it, or mark
command as pending.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"result" should always be an object (so that we can add new fields),
so make that implicit in json_stream_success.
This makes our primitives well-formed: we previously used NULL as our
fieldname when calling the first json_object_start, which is a hack
since we're actually in an object and the fieldname is 'result' (which
was already written by json_object_start).
There were only two cases which didn't do this:
1. dev-memdump returned an array. No API guarantees on this.
2. shutdown returned a string.
I temporarily made shutdown return an empty object, which shouldn't
break anything, but I want to fix that later anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are generalized from our internal implementations.
The main difference is that 'struct json_escaped' is now 'struct
json_escape', so we replace that immediately.
The difference between lightningd's json-writing ringbuffer and the
more generic ccan/json_out is that the latter has a better API and
handles escaping transparently if something slips through (though
it does offer direct accessors so you can mess things up yourself!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This new parameter takes a list of outpoints (as txid:vout) and fund a channel from the corresponding utxos.
Example : fundchannel <id> 10000 normal 1 [10767f0db0e568127fffd7f70a154d4599f42d62babf63230a7c3378bfce3cb0:0, c9e040e0b5fc8c59d5e7834108fbc5583001f414dd83faf0a05cff9d1a92d32c:0]
This means there's now a semantic difference between the default `fromid`
and setting `fromid` explicitly to our own node_id. In the default case,
it means we don't charge ourselves fees on the route.
This means we can spend the full channel balance.
We still want to consider the pricing of local channels, however:
there's a *reason* to discount one over another, and that is to bias
things. So we add the first-hop fee to the *risk* value instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Take into account the fee we'd have to pay if we're the funder, and
also drop to 0 if the amount is less than the smallest HTLC the peer
will accept.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was incorrectly handled before, hence the wrapper which checks
correctness of the arguments.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is important for things we automatically watched because it spends a
watch txo, but only onchaind knows the details about what the TX really is and
how it should be handled.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This takes the guesswork out of `drop_to_chain` and allows us to annotate the
last_tx consistently.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Fixes a corner case when reconnecting (which restarts channeld) at depth=6
where we didn't correctly send/respond with announce_signatures.
NOTE: A complete restart of node may initialize channeld with unupdated height
because of an unfinished rescan. But when rescan is finished, funding tx_watch is
fired (at least once), which then tells channeld the latest depth.
- Related Changes for `warning` notification
Add a `bool` type parameter in `log_()` and `lov()`, this `bool` flag
indicates if we should call `warning` notifier.
1) The process of copying `log_book` of every peer to the `log_book` of
`ld` is usually included in `log_()` and `lov()`, and it may lead to
repeated `warning` notification. So a `bool`, which explicitly indicates
if the `warning` notification is disabled during this call, is necessary
.
2) The `LOG_INFO` and `LOG_DEBUG` level don't need to call
warning, so set that `bool` paramater as `FALSE` for these log level and
only set it as `TRUE` for `LOG_UNUAUSL`/`LOG_BROKEN`. As for `LOG_IO`,
it use `log_io()` to log, so we needn't think about notifier for it.
This notification bases on `LOG_BROKEN` and `LOG_UNUSUAL` level log.
--Introduction
A notification for topic `warning` is sent every time a new `BROKEN`/
`UNUSUAL` level(in plugins, we use `error`/`warn`) log generated, which
means an unusual/borken thing happens, such as channel failed,
message resolving failed...
```json
{
"warning": {
"level": "warn",
"time": "1559743608.565342521",
"source": "lightningd(17652): 0821f80652fb840239df8dc99205792bba2e559a05469915804c08420230e23c7c chan #7854:",
"log": "Peer permanent failure in CHANNELD_NORMAL: lightning_channeld: sent ERROR bad reestablish dataloss msg"
}
}
```
1. `level` is `warn` or `error`:
`warn` means something seems bad happened and it's under control, but
we'd better check it;
`error` means something extremely bad is out of control, and it may lead
to crash;
2. `time` is the second since epoch;
3. `source`, in fact, is the `prefix` of the log_entry. It means where
the event happened, it may have the following forms:
`<node_id> chan #<db_id_of_channel>:`, `lightningd(<lightningd_pid>):`,
`plugin-<plugin_name>:`, `<daemon_name>(<daemon_pid>):`, `jsonrpc:`,
`jcon fd <error_fd_to_jsonrpc>:`, `plugin-manager`;
4. `log` is the context of the original log entry.
--Note:
1. The main code uses `UNUSUAL`/`BROKEN`, and plugin module uses `warn`
/`error`, considering the consistency with plugin, warning choose `warn`
/`error`. But users who use c-lightning with plugins may want to
`getlog` with specified level when receive warning. It's the duty for
plugin dev to turn `warn`/`error` into `UNUSUAL`/`BROKEN` and present it
to the users, or pass it directly to `getlog`;
2. About time, `json_log()` in `log` module uses the Relative Time, from
the time when `log_book` inited to the time when this event happend.
But I consider the `UNUSUAL`/`BROKEN` event is rare, and it is very
likely to happen after running for a long time, so for users, they will
pay more attention to Absolute Time.
-- Related Change
1. Remove the definitions of `log`, `log_book`, `log_entry` from `log.c`
to `log.h`, then they can be used in warning declaration and definition.
2. Remove `void json_add_time(struct json_stream *result, const char
*fieldname, struct timespec ts)` from `log.c` to `json.c`, and add
related declaration in `json.h`. Now the notification function in
`notification.c` can call it.
2. Add a pointer to `struct lightningd` in `struct log_book`. This may
affect the independence of the `log` module, but storing a pointer to
`ld` is more direct;
We reserve inputs when we're going to send a transaction, but we don't
unreserve them if we crash. This is most graphically demonstrated by
the txprepare case, which makes it easier to trigger.
Instead, we should query bitcoind to see whether the tx made it out or
not, as we would do manually with dev-rescan-outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently allocate utxos off cmd, but the next commit will persist a
wtx beyond the command which created it, breaking that assumption.
In general, a struct member should be owned by the struct itself, and
a tal context should be an explicit arg, not implicit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Keeping the uintmap ordering all the broadcastable messages is expensive:
130MB for the million-channels project. But now we delete obsolete entries
from the store, we can have the per-peer daemons simply read that sequentially
and stream the gossip itself.
This is the most primitive version, where all gossip is streamed;
successive patches will bring back proper handling of timestamp filtering
and initial_routing_sync.
We add a gossip_state field to track what's happening with our gossip
streaming: it's initialized in gossipd, and currently always set, but
once we handle timestamps the per-peer daemon may do it when the first
filter is sent.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we have more or less given up on the separation between response
callback and deserialization we can also just have the individual parts
returned.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Suggested-by: Rusty Russell <@rustyrussell>
It disables the error when attempting to do a state transition from
`RCVD_ADD_ACK_REVOCATION` to `RCVD_ADD_ACK_REVOCATION` which was done before
getting to this point.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Since we might soon be changing the payload it is a good idea to not just
expose the v0 payload, but also the raw payload for the plugin to
interpret. This might also include payloads that `lightningd` itself cannot
understand, but the plugin might.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Suggested-by: Corné Plooy <@bitonic-cjp>
This is a rather simple hook that allows a plugin to take control over
HTLCs that were accepted, but weren't resolved as part of an invoice
or forwarded to the next hop yet.
The goal is to allow plugins to terminate a route early, perform
intermediate checks before the payment is accepted (check inventory or
service delivery before accepting in order to avoid a refund for
example) or handle an onion differently if it has a different
realm (cross-chain atomic swaps).
This doesn't implement serializing the payload or deserializing it,
instead just passes the full context along. The details for
serializing and deserializing will be implemented in a future commit.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
A new string field is added to the command structure and is specified at the creation of each native command, and in the JSON created by 'json_add_help_command()'.
Before:
Plugin for invoice_payment returned non-result response
"subscriptions": [], "hooks": ["invoice_payment"]}}
�V
After:
Plugin for invoice_payment returned non-result response {"jsonrpc": "2.0", "id": 6, "error": "Error while processing invoice_payment: ValueError(\"invalid literal for int() with base 10: '5.0'\")"}
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Add remote_ann_node_sigs and remote_bitcoin_sigs fields in channel_init message;
2. Master add announcement signatures into channel_init message, and send this message to Channeld.
Channeld will initial the channel with this signatures when it reenables the channel.
Channeld sends announcement signatures to Master by this message.
When Channeld receive a new channel announcement msg, (After channel locking)it will sends announcement signatures to Master by this message.
Keep watching and updating scid until ANNOUNCE_MIN_DEPTH, even when channel is private.
When scid changes, we fail channeld so it will restart and initialize with updated
scid and add it to rtable. Reorgs can change funding tx's height/index after lockin,
which could happen with small minimum_depth=1.
This has two effects: most importantly, it avoids the problem where
lightningd creates a 800MB JSON blob in response to listchannels,
which causes OOM on the Raspberry Pi (our previous max allocation was
832MB). This is because lightning-cli can start draining the JSON
while we're filling the buffer, so we end up with a max allocation of
68MB.
But despite being less efficient (multiple queries to gossipd), it
actually speeds things up due to the parallelism:
MCP with -O3 -flto before vs after:
-listchannels_sec:8.980000-9.330000(9.206+/-0.14)
+listchannels_sec:7.500000-7.830000(7.656+/-0.11)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This happened with the 800M JSON for the MCP listchannels on the raspberry
pi, and tal calls abort() by default.
We switch to raw malloc here; we could override the error hook for
tal, but this is neater since we're doing low-level things anyway,
I tested it manually with this patch:
diff --git a/lightningd/json_stream.c b/lightningd/json_stream.c
index cec9f5771..206ba37c0 100644
--- a/lightningd/json_stream.c
+++ b/lightningd/json_stream.c
@@ -43,6 +43,14 @@ static void free_json_stream_membuf(struct json_stream *js)
free(membuf_cleanup(&js->outbuf));
}
+static void *membuf_realloc_hack(struct membuf *mb, void *rawelems,
+ size_t newsize)
+{
+ if (newsize > 1000000000)
+ return NULL;
+ return realloc(rawelems, newsize);
+}
+
struct json_stream *new_json_stream(const tal_t *ctx,
struct command *writer,
struct log *log)
@@ -53,7 +61,7 @@ struct json_stream *new_json_stream(const tal_t *ctx,
js->reader = NULL;
/* We don't use tal here, because we handle failure externally (tal
* helpfully aborts with a msg, which is usually right) */
- membuf_init(&js->outbuf, malloc(64), 64, membuf_realloc);
+ membuf_init(&js->outbuf, malloc(64), 64, membuf_realloc_hack);
tal_add_destructor(js, free_json_stream_membuf);
#if DEVELOPER
js->wrapping = tal_arr(js, jsmntype_t, 0);
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a test blockchain for MCP which has the correct channels,
so this is not needed.
Also fix a benchmark script bug where 'mv "$DIR"/log
"$DIR"/log.old.$$' would fail if you log didn't exist from a previous run.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was deeply surprising to me; there's a difference between a value not being
specified, and it being specified as "".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
New fields don't have to be spelled out twice.
The raw version are called _only, so we don't miss a call
accidentally. We can rename them when we finally deprecated old
fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of lightningd telling us when it's ready, we ask it.
This also provides an opportunity to have a plugin hook at this point.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The original idea is to "tal" channel on the "ctx"(In fact, we'd like to set ctx as "ld").
But we already tal channel on "ld" in new_channel(), so "ctx" is unused.
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were checking against a hard-coded list, now we return a valid address only
if the hrp matches the chainparams.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The chainparams are needed to know the prefixes, so instead of passing down
the testnet, we pass the entire params struct.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We were deciding whether an address is a testnet address or not in the parser,
and then checking whether it matches our expectation outside as well. This
just returns the address version instead, and still checks it against our
expectation, but without having the parser need to know about address types.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
* remove libbase58, use base58 from libwally
This removes libbase58 and uses libwally instead.
It allocates and then frees some memory, we may want to
add a function in wally that doesn't or override
wally_operations to use tal.
Signed-off-by: Lawrence Nahum lawrence@greenaddress.it
Without this, the connect command hangs in one of my branches. This logic
is from the old days when gossipd handled connections, and we wanted
to make sure it didn't hang up on this client due to the error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I misunderstood the API, this ended up nesting a result inside the JSON-RPC
result.
No concerns about backwards compatibility since this is so new.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems like overkill, at least for now. Handling the JSON
inline is clearer, for the existing examples at least.
We also remove the dummy hook, rather than fix it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For me this happened only under valgrind with
test_option_upfront_shutdown_script (in a pending branch):
==5063== by 0x51FC076: raise (raise.c:48)
==5063== by 0x51DD534: abort (abort.c:79)
==5063== by 0x1292D2: fatal (log.c:647)
==5063== by 0x116570: channel_set_state (channel.c:340)
==5063== by 0x116E04: lockin_complete (channel_control.c:73)
==5063== by 0x116F15: peer_got_funding_locked (channel_control.c:108)
==5063== by 0x117354: channel_msg (channel_control.c:208)
No CHANGELOG: this was introduced in a recent refactor.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The old value of 1000 sat was too small to cover the dust reserves.
This lead to the situation when trying to open a channel with minimal
amount, the channels got refused because they were not able cover the
commitment fees.
For this reason the minimal capacity should be increased to i.e. 10k
satoshi, as the technical minimum that also accounts for fees and
reserves is somewhere around 6k sat.
Refactored the weighted-reservoir-sampling algo to make it more straightforward.
It now uses the excess as fraction of capacity as weight. This favors channels that
are more _relatively_ unbalanced to be used for incoming payment.
Now passes test_invoice_routeboost_private() when using max fundamount=16777215.
make it a bit easier to track mutual channel closures by
adding broadcast txid to the listpeers billboard.
since lightningd manages the 'identity' of the closing tx we need
to send it back to closingd so it can update the billboard
appropriately.
This also allows plugins to do "hold invoices" a-la LND, useful for
just-in-time inventory handling.
We're careful to handle the invoice getting paid behind our backs, and
the incoming HTLC going away.
Once @cdecker's sphinx rework is in, we can also hand the raw payload
to the invoice_payment_hook, for special effects.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make it async, so start by moving the core code into
invoice.c and having that directly call fail/success functions for the
htlc.
We add an extra check in fulfill_htlc() that the HTLC state is correct:
that can't happen now, but may once we're async.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
For online services, shorter may be fine, but for casual use I'm usually
in a different timezone than the payer, so needs to be at least 1 day.
Certainly 1 hr is short if they have to open a channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We'd like to display the receive and resolution times in the forwardings
table. In order to remember the receive time we need to store it in the DB
along with the other information.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The timestamps are UNIX-Timestamps with 3 decimal places, even though we have
the timestamp with nanosecond granularity. This is deliberate choice not to
over overload the users :-)
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Travis caught an error where this happened: when closingd reconnects it
was sending the reestablish message without the option_dataloss_protect
fields. That causes the peer to fail the channel!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make json_start_member allocate extra space, which caller can directly
print into, and also make caller call js_written_some() itself.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:35071-36817(35617.2+/-7e+02)
vsz_kb:2637488
store_rewrite_sec:35.790000-37.500000(36.6375+/-0.63)
listnodes_sec:0.690000-0.780000(0.72+/-0.035)
listchannels_sec:34.600000-36.340000(35.36+/-0.77)
routing_sec:30.310000-30.730000(30.445+/-0.17)
peer_write_all_sec:50.830000-52.750000(51.82+/-0.89)
MCP notable changes from previous patch (>1 stddev):
-listnodes_sec:0.720000-0.950000(0.86+/-0.077)
+listnodes_sec:0.690000-0.780000(0.72+/-0.035)
-listchannels_sec:40.300000-41.080000(40.668+/-0.29)
+listchannels_sec:34.600000-36.340000(35.36+/-0.77)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't result in a speedup for our benchmark, since we use the
cli tool which does the formatting.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:33422-36830(35196.2+/-1.2e+03)
vsz_kb:2637488
store_rewrite_sec:36.030000-37.630000(36.794+/-0.52)
listnodes_sec:0.720000-0.950000(0.86+/-0.077)
listchannels_sec:40.300000-41.080000(40.668+/-0.29)
routing_sec:30.440000-31.030000(30.69+/-0.2)
peer_write_all_sec:50.060000-52.800000(51.416+/-0.91)
MCP notable changes from 2 patches ago (>1 stddev):
-listchannels_sec:48.560000-55.680000(52.642+/-2.7)
+listchannels_sec:40.300000-41.080000(40.668+/-0.29)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is one of the more significant fields we print, but there's no
need to allocate a temp buffer or escape the resulting string.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:34048-36002(35070.4+/-8.5e+02)
vsz_kb:2637488
store_rewrite_sec:35.110000-38.120000(36.604+/-1.2)
listnodes_sec:0.830000-1.020000(0.95+/-0.065)
listchannels_sec:48.560000-55.680000(52.642+/-2.7)
routing_sec:29.800000-33.170000(30.536+/-1.3)
peer_write_all_sec:49.260000-52.490000(50.316+/-1.1)
MCP notable changes from previous patch (>1 stddev):
-listchannels_sec:55.390000-58.110000(56.998+/-0.99)
+listchannels_sec:48.560000-55.680000(52.642+/-2.7)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can save significant space by combining both sides: so much that we
can reduce the WIRE_LEN_LIMIT to something sane again.
MCP results from 5 runs, min-max(mean +/- stddev):
store_load_msec:34467-36764(35517.8+/-7.7e+02)
vsz_kb:2637488
store_rewrite_sec:35.310000-36.580000(35.816+/-0.44)
listnodes_sec:1.140000-2.780000(1.596+/-0.6)
listchannels_sec:55.390000-58.110000(56.998+/-0.99)
routing_sec:30.330000-30.920000(30.642+/-0.19)
peer_write_all_sec:50.640000-53.360000(51.822+/-0.91)
MCP notable changes from previous patch (>1 stddev):
-store_rewrite_sec:34.720000-35.130000(34.94+/-0.14)
+store_rewrite_sec:35.310000-36.580000(35.816+/-0.44)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried to just do gossipd, but it was uncontainable, so this ended up being
a complete sweep.
We didn't get much space saving in gossipd, even though we should save
24 bytes per node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Node ids are pubkeys, but we only use them as pubkeys for routing and checking
gossip messages. So we're packing and unpacking them constantly, and wasting
some space and time.
This introduces a new type, explicitly the SEC1 compressed encoding
(33 bytes). We ensure its validity when we load from the db, or get it
from JSON. We still use 'struct pubkey' for peer messages, which checks
validity.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
39475-39572(39518+/-36),2880732,41.150000-41.390000(41.298+/-0.085),2.260000-2.550000(2.336+/-0.11),44.390000-65.150000(58.648+/-7.5),32.740000-33.020000(32.89+/-0.093),44.130000-45.090000(44.566+/-0.32)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- add config value min_capacity_sat that will replaces the magic value
min_effective_htlc_capacity = AMOUNT_MSAT(1000000)
- add config switch min_capacity_sat
Adding a giant IO message simply causes it to be pruned immediately,
so truncate it if it's more than 1/64 the max size.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This causes natural batching, rather than on every little addition of
JSON formatting.
Before, to listchannels 100,000 channels took 82.48 seconds, after
6.82 seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us benchmark without a valid blockchain.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Header from folded patch 'fixup!_gossipd__dev_option_to_allow_unknown_channels.patch':
fixup! gossipd: dev option to allow unknown channels.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I started by trying to change the current infrastructure, but this is
really the only completely sync hook which makes sense; it needs to avoid
doing the db_transation, as well as waiting, and using a callback is just
overkill.
So with some regret, I open coded it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Rename channel_funding_locked to channel_funding_depth in
channeld/channel_wire.csv.
2. Add minimum_depth in struct channel in common/initial_channel.h and
change corresponding init function: new_initial_channel().
3. Add confirmation_needed in struct peer in channeld/channeld.c.
4. Rename channel_tell_funding_locked to channel_tell_depth.
5. Call channel_tell_depth even if depth < minimum, and still call
lockin_complete in channel_tell_depth, iff depth > minimum_depth.
6. channeld ignore the channel_funding_depth unless its >
minimum_depth(except to update billboard, and set
peer->confirmation_needed = minimum_depth - depth).
- This will make a channel loop when 'id' argument was "all".
- The response will now contain an array of objects (peer_id, scid, ...)
- It will skip channels in invalid states.
- Moves iffy channel/peer param stuff to param_channel_or_all
We set the version BIP32_VER_TEST_PRIVATE for testnet/regtest
BIP32 privkey generation with libwally-core, and set
BIP32_VER_MAIN_PRIVATE for mainnet.
For litecoin, we also set it like bitcoin else.
1. amount operations should force you to check validity, rather than
needing a separate call, so make amount_msat_to_u32 return bool,
and WARN_UNUSED_RESULT it.
2. Create a special parsing function for this; not only does this mean
we now only need that one amount call, but also 'check' will correctly
fail with invalid amounts (it only does the parsing step).
3. If we create a primitive which we immediately take(), we allocate it
off NULL to make it clear we expect its lifetime to end here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- Intrduce DB update `channel` values: `feerate_base` and `feerate_ppm`
- Make fist use of now context realted DB migration
- Add `struct channel` members of the same name
- Use struct values instead of config when commiting new channels
New name is less confusing, and most people should be transitioning to
listpays rather than this anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This field was used by `pay` to hold the bolt11 description if the bolt11
string used `h` to hash the description (which nobody ever did). If the
`h` field wasn't present, it could contain anything, as it wasn't checked.
It's really useful to have a label for payments (eg. '1 Cuban'), but adding
yet-another option would be painful, so we simply rename 'description'
to 'label' except inside the db.
This means we need to do some tricky parameter parsing to handle array
and keyword JSON arguments, but only until we remove the old name.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this, there's no proof of payment, since it is the signed invoice
that make the receipt valid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
onchaind is in the correct position to tell us about them, so have it pass
them up as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
In order to avoid having to ask the HSM for public keys to
their_unilateral/to_us outputs we just store the `scriptPubkey` with the UTXO,
which can then be converted to the P2WPKH address.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We want to disallow using unconfirmed outputs by default, so making the
default 1 confirmation seems a good idea. This also matches `bitcoind`s
minimum confirmation requirement.
Arming however breaks some of our tests, so I used `minconf=0` for the
breaking tests and added a new test specifically for the `minconf` parameter
for `fundchannel`.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This allows us to specify that an output must have been confirmed before the
given maximum height. This allows us to specify a minimum number of
confirmations for an output to be selected.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This will make the logger write 4 newlines to re-attached logfiles.
The newlines wont appear on logfiles that are just created.
Additionally the server prints 50 '-' dashes before printing his
startup message, which also help increase readability on logfile.
This was inspired by the way Bitcoin Core handles logfiles.
An uncommitted channel should not keep the peer in the db, since the
uncommitted channel isn't in the db itself.
Fixes: #2367
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to do it in various places, but we shouldn't do it lightly:
the primitives are there to help us get overflow handling correct.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As a side-effect of using amount_msat in gossipd/routing.c, we explicitly
handle overflows and don't need to pre-prune ridiculous-fee channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're about to add 'amount_msat' to getroute, but it's common to feed
'getroute' back into 'sendpay', so sendpay should allow it.
If both are specified, make sure they're the same!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using param_tok is generally deprecated, as it doesn't give any sanity checking
for the JSON 'check' command. So make param_wtx usable directly, and
also make it have a struct amount_sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These create two fields, one old one which is purely numeric,
and a modern on with a suffix, eg "msatoshi" and "amount_msat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The current param_sat accepts "any": rename and move that to invoice.c
where it's called. We rename it to param_msat_or_any and invoice.c
is our first (trivial) amount_msat user.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Final step for the `peer_connected` hook, we parse the result and act
accordingly. Currently we just close the underlying connection, but we
may want to clean up peers that did not end up with a channel.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The format is very similar to the one for `listpeers` except we only
list a single channel, and we list the actual netaddr that connected
instead of all known from gossip.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This used to be inline, but we want to pass channels to hooks as well,
so we just extract this into its own function.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This hook is used to let a plugin decide whether we should continue
with the connection normally, or whether we should be dropping the
connection. Possible use-cases include policy enforcement (dropping
connections based on previous interactions), draining a node by
allowing only peers with an active channel to reconnect, or
temporarily preventing a channel from making progress.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
I got a spurious failure because the final node gave a CLTV error and
so it decided to use a different channel. It should probably handle
this corner case better, but meanwhile make the test robust.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This patch will properly set fee_per_satoshi to _unsigned_ integer,
as support for negative fees was removed from overall design.
This change does not break any tests, so I assume its
better this way.
We need to still accept it when parsing the database, but this flag
should allow upgrade testing for devs building on top
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We store it in a strmap. This means we call the jsonrpc handler earlier,
so all callers need to call param() before they do anything else; only
json_listaddrs and json_help needed fixing.
Plugins still use '[usage]' for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Next patch will call commands to get usage inside jsonrpc_new(): to do
this it will need access to ld->jsonrpc, so we can't use the current
pattern.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This fixes a bug with a plugin duplicating an existing name
where we'd crash, too.
This doesn't work for builtins, which aren't tal objects, so
create a separate path for them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used a u16, and a 1000 multiplier, which meant we wrapped at
riskfactor 66. We also never undid the multiplier, so we ended up
applying 1000x the riskfactor they specified.
This changes us to pass the riskfactor with a 1M multiplier. The next
patch changes the definition of riskfactor to be more useful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- result fundchannel command now depends on successful or failed broadcast of the funding tx
- failure returns error code FUNDING_BROADCAST_FAIL
- don't fail the channel when broadcast failed, but keep in CHANNELD_AWAITING_LOCKIN
- after fixing the initial broadcast failure, the user could manually rebroadcast the tx and
keep the channel
openingd/opening_funder_finished:
- broadcast_tx callback function now handles both success and failure
jsonrpc: added error code FUNDING_BROADCAST_FAIL
manpage: added error code returned by fundchannel command
This makes the user more aware of broadcast failure, so it hopefully doesn't
try to broadcast new tx's that depend on its change_outputs. Some users have reported (see
issue #2171) a whole sequence of fundings failing, because each funding was using the change
output of the previous one, which would not confirm.
The use of `json_tok_full_len` and `json_tok_full` in addition to
single quotes will result in double quoting, which is really weird. I
opted to single quoting using `'` instead which does not need to be
escaped.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
List the final one instead; if there's an error from the node it
may actually make sense to blame that channel (ie. previous node
did something wrong).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer need a 'sendpay_result' structure, we can pass
appropriate parameter directly now they're simple calls.
Every waitsendpay command ends in tell_waiters_failed or
tell_waiters_success, which call sendpay_success or sendpay_fail on
all matching waiters. These all return 'struct command_result *'.
In cases where the result is immediately known, we call
sendpay_success/sendpay_fail directly for the command.
This also adds a helpful 'failcodename' field to the JSON output.
[ This was four separate cleanup patches, but that contained much
redundancy and was even worse to review ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With only one caller, we don't need a callback pointer any more; we can simply
call the function.
This required some code shuffling, and I changed the callback function
arguments to be in a more natural order, now they're not used as
callbacks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we don't have a second caller for these routines, we can move
them back into pay.c and make the functions static.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Saibato
Rusty Russell
Christian Decker
trueptolemy
lisa neigut
trueptolemy
darosior
Simon Vrouwe
Rene Pickhardt
tasoshi
Karl-Johan Alm
ZmnSCPxj
GreenAddress
Michael Schmoock
andrewtoth
Jeff Vandrew Jr
Richard Bondi
Conor Scott