The only thing that needs ld->wallet after this is destroy_invoices_waiter (off jsonrpc)
Could not find any other destructors (destroy_*) that need wallet or db access after this.
Any db access would now segfault.
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
because:
- shutdown_subdaemons can trigger db write, comments in that function say so at least
- resurrecting the main event loop with subdaemons still running is counter productive
in shutting down activity (such as htlc's, hook_calls etc.)
- custom behavior injected by plugins via hooks should be consistent, see test
in previous commmit
IDEA:
in shutdown_plugins, when starting new io_loop:
- A plugin that is still running can return a jsonrpc_request response, this triggers
response_cb, which cannot be handled because subdaemons are gone -> so any response_cb should be blocked/aborted
- jsonrpc is still there, so users (such as plugins) can make new jsonrpc_request's which
cannot be handled because subdaemons are gone -> so new rpc_request should also be blocked
- But we do want to send/receive notifications and log messages (handled in jsonrpc as jsonrpc_notification)
as these do not trigger subdaemon calls or db_write's
Log messages and notifications do not have "id" field, where jsonrpc_request *do* have an "id" field
PLAN (hypothesis):
- hack into plugin_read_json_one OR plugin_response_handle to filter-out json with
an "id" field, this should
block/abandon any jsonrpc_request responses (and new jsonrpc_requests for plugins?)
Q. Can internal (so not via plugin) jsonrpc_requests called in the main io_loop return/revive in
the shutdown io_loop?
A. No. All code under lightningd/ returning command_still_pending depends on either a subdaemon, timer or
plugin. In shutdown loop the subdaemons are dead, timer struct cleared and plugins will be taken
care of (in next commits).
fixup: we can only io_break the main io_loop once
This loads up 20MB of plugins temporarily; we seem to be getting OOM
killed under CI and I wonder if this is contributing.
Doesn't significantly reduce runtime here, but I have lots of memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
This adds a `u32 checksum` field to the plugin struct that is used
to identify if a plugin is outdated and needs to be restarted on `rescan`.
Note: Only affects non-important plugins.
Changelog-Added: Plugin: Restart plugin on `rescan` when binary was changed.
Makes it possible to write a decent JSON schema, but means we need to carry
additional data, so we create a `struct plugin_command`.
We remove the unused struct dynamic_plugin, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We don't need to check for NULL before tal_count(NULL).
2. Use of json_for_each_arr iterator is probably better.
3. Weird indent fixed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since plugins will start sending them soon, and they are likely to get
it wrong sometimes, be a bit more lenient, warn them in the logs
instead and then make sure it doesn't accidentally work anyway.
A plugin might subscribe to a notification topic that is only
registered by another plugin later, so push the check to that
consistency check phase where we do hook ordering as well.
We will eventually start emitting and dispatching custom notifications
from plugins just like we dispatch internal notifications. In order to
get reasonable error messages we need to make sure that the topics
plugins are asking for were correctly registered. When doing this we
don't really care about whether the plugin that registered the
notification is still alive or not (it might have died, but
subscribers should stay up and running), so we keep a list of all
topics attached to the `struct plugins` which gathers global plugin
information.
This avoids spamming the logs. We also remove the duplicate debug
logs on self-disable (plugin_kill logs it for us).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We currently log every kill at INFO level, even if it's during shutdown.
Change those to debug, but lift those where we got a malformed response.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If a plugin died due to connection close, we'd always say
"Plugin exited before completing handshake.", which was often
wrong.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
By returning 'disable: <reason>' inside getmanifest or init result.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: plugins can now disable themselves by returning `disable`, even if marked important.
"multi" means that specifying a parameter twice will append, not override.
Multi args are always given as a JSON array, even if only one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: new "multi" field allows an option to be specified multiple times.
This was fixed in 0.8.2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: plugins: options to init are no longer given as strings if they are bool or int types (deprecated in 0.8.2).
This effectively reverts ac93b780d5.
Christian points out that plugins need time before we deprecate
the old options (probably 6 months) as they need to work with
both old and new.
Changelog-Deprecated: **UNDO** plugins: hooks should now be specified using objects, not raw names.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We previously registered hooks up in who-replies-to-getmanifest-first
order, but then if any had dependencies it would scatter that order.
This allows users to manually set dependencies developers have
forgotten by specifying the plugins manually in their configuration or
cmdline. This was an excellent consideration by @mschmook.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now both python and c libraries are updated, we can officially
deprecate the old form.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: plugins: hooks should now be specified using objects, not raw names.
The next patch will use these to order the hooks.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: plugins: hooks can now specify that they must be called 'before' or 'after' other plugins.
And make caller of json_stream_forward_change_id use it, since
we're going to reuse that.
Also call json_out_finished here, so next object doesn't have a ","
prepended.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that check-whitespace and check-bolt already do this, so we
can eliminate redundant lines in common/Makefile and bitcoin/Makefile.
We also include the plugin headers in ALL_C_HEADERS so they get
checked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I got a corrupt file, which looked like multiple concurrent attempts
to build it. So instead, build it in one command, but also use
VERBOSE so we print correctly with V=1 (and --quiet).
Also move into plugins/ where it logically belongs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We promised this in 0.8.1!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Plugin: Relative plugin paths are not relative to startup (deprecated v0.7.2.1)
Simon Vrouwe
Rusty Russell
Michael Schmoock
Christian Decker
ZmnSCPxj jxPCSnmZ
Vincenzo Palazzo