There were cases where address it's empty, and this cases are not right if the
field is considered optional.
This makes it required and add the field also when `--offline` is set.
Changelog-Changed: JSON-RPC: `getinfo` `address` array is always present (though may be empty)
We need to check if the key parameter is an empty array in
`listdatastore` as we do assume an array of at least length 1 in
`wallet.c:5306`.
Signed-off-by: Peter Neuroth <pet.v.ne@gmail.com>
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-onion-message" BOLTVERSION=guilt/offers
```
Mainly textual, though I neatened the extra fields check for TLVs with
blinding, and implemented the "no other fields" requirement for
non-final onion message hops.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
make check-source-bolt CHECK_BOLT_PREFIX="--prefix=BOLT-route-blinding" BOLTVERSION=guilt/offers
```
Other than textual changes, this does:
1. Ensures we put total_amount_msat in onion final hop (reported by @t-bast).
2. Require that they put total_amount_msat in onion final hop.
3. Return `invalid_onion_blinding` exactly as defined by the spec (i.e. less
aggressive when we're the final hop) (also reported by @t-bast, but I already
knew).
See: #5823
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `offers` breaking blinded payments change (total_amount_sat required, Eclair compat)
You can use rs->nextcase, but we don't always keep that around, so
keep a flag in onion_payload.
We'll use this in the "do we need to return a blinded error code"
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Also, we don't need to pass the total length to the field parsers,
just the length for this field (confusingly, this was called
"data_length").
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will give the user an option to set a custom port when using
discovered IPs for node_announcents. Without this, only the selected
networks default port can used.
Changelog-Added: Adds --announce-addr-discovered-port config option to set custom port for IP discovery.
This switch was not doing anything useful anymore.
We deprecate it anyways to notify the user about the new switch.
Changelog-Deprecated: The old --disable-ip-discovery config switch
This adds the option to explicitly enable ip-discovery, which maybe
helpful for example when a user wants TOR announced along with
discovered IPs to improve connectivity and have TOR just as a fallback.
Changelog-Added: Adds config switch 'announce-addr-discovered': on/off/auto
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
E Global errors:
E - Node /tmp/ltests-adkwu44c/test_logging_1/lightning-2/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "lightningd/peer_control.c:2203 (load_channels_from_wallet)",
E "lightningd/lightningd.c:1105 (main)"
E ],
E "label": "lightningd/peer_control.c:2203:struct htlc_in_map",
E "parents": [
E "lightningd/lightningd.c:107:struct lightningd"
E ],
E "value": "0x55d920a345e8"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `listpeerchannels` now contains information on direct channels with our peers.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We're soon going to call json_add_unsaved_channel and
json_add_uncommitted_channel from a new place, where we want the peer
state directly included.
Based on patch by @vincenzopalazzo.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids any confusion between primitive and string ids, and in
particular stops an issue with commando once it starts chaining ids,
that weird ids can be double-escaped and commando will not recognize
the response, leaving the client hanging. It's the client's fault for
using a weird id, but it's still rude (and triggered by our tests!).
It also makes substituting the id in passthrough simpler, FTW.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When a channel is not yet confirmed onchain and only has an alias,
`getroute` will return the alias under the "channel" key. However, if
you supply that to `sendpay`, it will not be able to find the channel
and will fail since it calls `find_channel_for_htlc_add` and that only
looks for channels by their scid and doesn't consider their alias.
This patch makes `find_channel_for_htlc_add` also consider channel
aliases when looking for channels.
Changelog-Fixed: JSON-RPC: `sendpay` now can send to a short-channel-id alias for the first hop.
We were stressing the servers if node cannot be found. Only do lookup
on manual connect commands.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Protocol: lightningd: Only use DNS server address lookup on manual `connect` commands, not normal reconnection attempts.
This broke BTCPayServer, so revert. I originally (accidentally!)
implemented this such that it broadcast both DNS and IP entries, but
Michael reported earlier that they still don't propagage well, so
simply suppress them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5795
Changelog-Changeed: Config: `announce-addr-dns` needs to be set to *true* to put DNS names into node announcements, otherwise they are suppressed.
Changelog-Deprecated: Config: `announce-addr-dns` (currently defaults to `false`). This will default to `true` once enough of the network has upgraded to understand DNS entries.
This reverts commit 43b037ab0b.
Nicholas Dorier says BTC Payserver still wants this for another year
or so.
Changelog-Added: JSON-RPC: reverts requirement for "jsonrpc" "2.0" inside requests (still deprecated though, just for a while longer!)
The read_json() call expects len_read to be the amount of *new*
data read. If we call this back without resetting, it will parse
this much random junk in the buffer.
Fixes: #5766
Changelog-Fixed: Plugin: `autoclean` could misperform or get killed due to lightningd's invalid handling of JSON batching.
If we both support large channels, we can actually send giant HTLCs.
This, in turn, fixes pay (which relies on this field!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Plugins: `pay` now knows it can use locally-connected wumbo channels for large payments.
Fixes: #5250Fixes: #5417
This is a mistake that I introduced while I implemented the lightningd custom error for hsmd.
In particular, when the command line parser check
if the file is encrypted make an additional check regarding the existence of the file.
This can be a not useful check, but due to the delicate nature of the hsm file, it is better to check if exist and if it doesn't exist an informative line inside the log is emitted that notifies the user that the file does not exist.
This log may return useful while debugging disaster
(that can happen) to understand that there is something strange (eg. the user moves the hsm file somewhere else).
Fixes https://github.com/ElementsProject/lightning/issues/5719
Changelog-Fixed: lightningd: do not abort while parsing hsm pwd
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This was found by tests/test_plugin.py::test_important_plugin and
was NOT a flake!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-None: only just committed
This is a minimal fix: we wait until all plugins reply from init before
continuing. Really large or busy nodes can have other things monopolize
lightningd, then the timer goes off and we blame the plugin (which has
responded, we just haven't read it yet!).
The real answer is to have some timeouts only advance when we're idle,
or have them low-priority so we only activate them when we're idle (this
doesn't apply to all timers: some are probably important!). But
this is a minimal fix for -rc3.
Fixes: https://github.com/ElementsProject/lightning/issues/5736
Changelog-Fixed: plugins: on large/slow nodes we could blame plugins for failing to answer init in time, when we were just slow.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And document support for it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `getmanfest` response can contain `nonnumericids` to indicate support for modern string-based JSON request ids.
Changelog-Deprecated: Plugins: numeric JSON request ids: modern ones will be strings (see doc/lightningd-rpc.7.md!)
We had a quadratic check when processing a block, and this just
reduces it to be linear. Combined with the previous fix of adding txs
multiple times, this should speed up block processing considerably.
We were using a quadratic lookup to locate the transactions we
broadcast, so let's use an `htable` instead, allowing for constant
lookups during block processing.
The list of outgoing transactions was growing with every
rebroadcast. Now we just check whether it is already in the list and
don't add it anymore
Changelog-Fixed: ld: Reduce identification of own transactions to not slow down over time, reducing block processing time
Suggested-by: Matt Whitlock <@whitslack>
On testnet I noticed if we can't reach bitcoind for some reason, we'll
keep RBFing our penalty tx ("it didn't go in, RBF harder!!"). Makes
no sense to grossly exceed the amount needed for next block, so simply
cap penalty at 2x "estimatesmartfee 2 CONSERVATIVE".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is how we put new invoice_requests into the db; this will be used
by a new "invoicerequest" command which replaces "offerout".
The API is now the same as the offers api.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We no longer use offers for "I want to send you money", but we'll use
invoice_requests directly. Create a new table for them, and
associated functions.
The "localofferid" for "pay" and "sendpay" is now "localinvreqid".
This is an experimental-only option, so document the change under
experimental only.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `pay` and `sendpay` `localofferid` is now `localinvreqid`.
I know this is an unforgivably large diff, but the spec has changed so
much that most of this amounts to a rewrite.
Some points:
* We no longer have "offer_id" fields, we generate that locally, as all
offer fields are mirrored into invoice_request and then invoice.
* Because of that mirroring, field names all have explicit offer/invreq/invoice
prefixes.
* The `refund_for` fields have been removed from spec: will re-add locally later.
* quantity_min was removed, max == 0 now mean "must specify a quantity".
* I have put recurrence fields back in locally.
This brings us to 655df03d8729c0918bdacac99eb13fdb0ee93345 ("BOLT 12:
add explicit invoice_node_id.")
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And check it in invoice.c, insead of a hack where we compare against invhash.
Restore checking, too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The "path" is just a message to ourselves. This meets the minimal
requirement for bolt12 invoices: that there be a blinded path (at
least so we can use the path_id inside in place of "payment_secret").
We expose the method to make this path_id to a common routine: offers
will need this for generating more sophisticated paths.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Instead of doing command_fail() in the else, do it immediately then
unindent the normal path.
No code changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We had a scheme where lightningd itself would put a per-node secret in
the blinded path, then we'd tell the caller when it was used. Then it
simply checks the alias to determine if the correct path was used.
But this doesn't work when we start to offer multiple blinded paths.
So go for a far simpler scheme, where the secret is generated (and
stored) by the caller, and hand it back to them.
We keep the split "with secret" or "without secret" API, since I'm
sure callers who don't care about the secret won't check that it
doesn't exist! And without that, someone can use a blinded path for a
different message and get a response which may reveal the node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We actually want lightningd to create these, since it wants to put the
path_id secret in the last element. So best API is actually a generic
one, rather than separate APIs to create first and last ones.
And really, the more explicit initialization makes the users clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This current spec is not strict enough: we might complain that the
next peer is not connected, for example, which leaks information.
So return WIRE_INVALID_ONION_BLINDING even if we're the first hop
on the path, to be safe.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This makes us match eed2ab0c30ad7f93e3b2641ca9d7ade32f3d121d
("Use `invalid_onion_blinding` everywhere").
1. Numerous typographical changes.
2. Make sure we *always* return WIRE_INVALID_ONION_BLINDING if
we're in a blinded path.
3. Handle p->total_msat correctly (MPP payments).
4. Reorganize blinding handling just like spec order.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listfunds` now lists coinbase outputs as 'immature' until they're spendable
Changelog-Changed: JSON-RPC: UTXOs aren't spendable while immature
Since the "struct command" is different from plugins and lightningd, we
need an accessor for this to work (the plugin one is a dummy for now!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Mainly, field name changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: Support for forwarding blinded payments (as per latest draft)
Don't shoehorn it into onion_nonfinal_hop() and onion_final_hop(), but
provide an explicit routine "blinded_onion_hops" and an onion helper
"onion_blinded_hop()" for it to call.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's 2b7ad577d7a790b302bd1aa044b22c809c76e49d, which reverts the
point32 changes.
It also restores send_invoice in `invoice`, which we had removed
from spec and put into the recurrence patch.
I originally had implemented compatibility, but other changes
which followed this are far too widespread.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: offers: complete rework of spec from other teams (yay!) breaks previous compatibility (boo!)
This is the one place where we hand point32 over the wire internally, so
remove it.
This is also our first hsm version change!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
With the rise of external HSMs like VLS, this is no longer an
internal-only API. Fortunately, it doesn't change very fast so
maintenance should not be a huge burden.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were leaving out the `channel_max_msat` for `openchannel2` when
channels are 'wumbo' (the conversion to msat in the json helper
overflowed, which resulted in the field not being printed)
Changelog-Changed: Plugins: `openchannel2` now always includes the `channel_max_msat`
We don't actually process onion messages here any more (they moved to
connectd), but the flag and object files were still linked.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
"sphinx_add_hop" takes a literal hop to include,
"sphinx_add_modern_hop" prepends the length. Now we always prepend a
length, make it clear that the literal version is a shortcut:
* sphinx_add_hop -> sphinx_add_hop_has_length
* sphinx_add_modern_hop -> sphinx_add_hop
In addition, we check that length is actually correct! This means
`createonion` can no longer create legacy or otherwise-invalid onions:
fix tests and update man page to remove legacy usage.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `createonion` no longer allows non-TLV-style payloads.
We still have an "enum forward_style" for the database, where old-style
forwards can still exist.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: we no longer forward HTLCs with legacy onions.
We have to allow them (as otherwise `fees_collected_msat` in getinfo breaks),
but it means that actually, in_htlc_id might be missing in listforwards
(also, out_htlc_id might be missing, which we didn't catch before).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5628
Otherwise what the hook sees is actually a lie, and if it sets it
we might override it.
The side effect is that we add an explicit "forward_to" field, and
allow hooks to override it. This lets a *hook* control channel
choice explicitly.
Changelod-Added: Plugins: `htlc_accepted_hook` return can specify what channel to forward htlc to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's a bit more optimal, and tells gossipd exactly what height the
spend occurred at (with multiple blocks, it's not always the current
height!). It will need that next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: We now set the `dont_forward` bit on private channel_update's message_flags (as per latest BOLTs).
This is actually what the autoclean plugin wants, especially since
you can't otherwise delete a payment which has failed then succeeded.
But insist on neither or both being specified, at least for now.
Changelog-Added: JSON-RPC: `delpay` takes optional `groupid` and `partid` parameters to specify exactly what payment to delete.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Previous commit was a hack which *always* batched where possible, this
is a more sophisticated opt-in varaint, with a timeout sanity check.
Final performance for cleaning up 1M pays/forwards/invoices:
```
$ time l1-cli autoclean-once succeededpays 1
{
"autoclean": {
"succeededpays": {
"cleaned": 1000000,
"uncleaned": 26895
}
}
}
real 6m9.828s
user 0m0.003s
sys 0m0.001s
$ time l2-cli autoclean-once succeededforwards 1
{
"autoclean": {
"succeededforwards": {
"cleaned": 1000000,
"uncleaned": 40
}
}
}
real 3m20.789s
user 0m0.004s
sys 0m0.001s
$ time l3-cli autoclean-once paidinvoices 1
{
"autoclean": {
"paidinvoices": {
"cleaned": 1000000,
"uncleaned": 0
}
}
}
real 6m47.941s
user 0m0.001s
sys 0m0.000s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `batching` command to allow database transactions to cross multiple back-to-back JSON commands.
This shows the benefits of batching when being slammed by autoclean:
Before:
```
plugin-autoclean: last 1000 deletes took 6699022 nsec each
plugin-autoclean: last 1000 deletes took 6734025 nsec each
plugin-autoclean: last 1000 deletes took 6681189 nsec each
plugin-autoclean: last 1000 deletes took 6597148 nsec each
plugin-autoclean: last 1000 deletes took 6637085 nsec each
plugin-autoclean: last 1000 deletes took 6801425 nsec each
plugin-autoclean: last 1000 deletes took 6788572 nsec each
plugin-autoclean: last 1000 deletes took 6603641 nsec each
plugin-autoclean: last 1000 deletes took 6642947 nsec each
plugin-autoclean: last 1000 deletes took 6590495 nsec each
plugin-autoclean: last 1000 deletes took 6695076 nsec each
plugin-autoclean: last 1000 deletes took 6477981 nsec each
```
After:
```
plugin-autoclean: last 1000 deletes took 342764 nsec each
plugin-autoclean: last 1000 deletes took 375031 nsec each
plugin-autoclean: last 1000 deletes took 357564 nsec each
plugin-autoclean: last 1000 deletes took 381581 nsec each
plugin-autoclean: last 1000 deletes took 337989 nsec each
plugin-autoclean: last 1000 deletes took 329391 nsec each
plugin-autoclean: last 1000 deletes took 328322 nsec each
plugin-autoclean: last 1000 deletes took 372810 nsec each
plugin-autoclean: last 1000 deletes took 351228 nsec each
plugin-autoclean: last 1000 deletes took 413885 nsec each
plugin-autoclean: last 1000 deletes took 348317 nsec each
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Using `listfowards` for this wrong; expose this directly if people
care (and unlike listforwards, which could be deleted, we have to
remember these while the channel is still open!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listhtlcs` new command to list all known HTLCS.
And document that we never know payment_hash.
Changelog-Added: JSON-RPC: `listforwards` now shows `in_htlc_id` and `out_htlc_id`
Changelog-Changed: JSON-RPC: `listforwards` now never shows `payment_hash`; use `listhtlcs`.
The old `experimental-accept-extra-tlv-types` is now `accept-htlc-tlv-types`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `accept-htlc-tlv-types` lets us accept unknown even HTLC TLV fields we would normally reject on parsing (was EXPERIMENTAL-only `experimental-accept-extra-tlv-types`).
Technically this is a non-conformance with the spec, hence the `dev`
flag to opt-in, however I'm being told that it is also implemented in
other implementations. I'll follow this up with a proposal to the spec
to remove the checks we now bypass.
Changelog-Added: JSON-RPC: `fundchannel`, `multifundchannel` and `fundchannel_start` now accept a `reserve` parameter to indicate the absolute reserve to impose on the peer.
Add memleak_ignore_children() so callers can do exclusions themselves.
Having two exclusions was always such a hack!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows GDB to print values, but also allows us to use them in
'case' statements. This wasn't allowed before because they're not
constant terms.
This also made it clear there's a clash between two error codes,
so move one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: Error code from bcli plugin changed from 400 to 500.
First, merge the _ahf_ and non-ahf interfaces.
Second, remove the always-NULL txs->cmd field.
Then, add optional id_prefix for bitcoind_sendrawx, so if it's
triggered by a command (e.g. "withdraw") it's shown correctly in logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Usually the calls are spontanous, so it's just "cln:<method>#NNN", but
json_invoice() calls listincoming, and json_checkmessage calls
listnodes, so those become "cli:invoice-<pid>/cln:listincoming#NNN".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is cleaner because, the `remote_addr` and `discovered_ip` are
related but two different things.
Within connectd and lightningd we use the peers `remote_addr` feature
to validate (and guess a port) to be used for IP discovery.
Also when a peer reports us a `remote_addr`, this is given to the plugin API
via the `peer_connected` hook. The network port here is not modified for
godd reason! This can be used i.e. to detect if we are behind a NAT.
But once lightningd figures enough peers report the same `remote_addr`,
it sets the port to the selected network and tells gossipd to use that for
`node_announcement` updates.
Hence, within gossipd, there is no (should not be) `remote_addr`.
Changelog-None
This is a good sanity check that users understand that if they upgrade
to master mid-cycle they can't go back!
Suggested-by: @wtogami
Changelog-Added: Config: `--database-upgrade=true` required if a non-release version wants to (irrevocably!) upgrade the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can (and probably should!) allocate this off tmpctx rather than
off the response.
Also, json_add_invoice doesn't actually match the normal pattern,
so fix that.
```
E ValueError:
E Node errors:
E Global errors:
E - Node /tmp/ltests-_vbj8az8/test_pay_fail_unconfirmed_channel_1/lightning-2/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "wallet/invoices.c:81 (wallet_stmt2invoice_details)",
E "wallet/invoices.c:697 (invoices_get_details)",
E "wallet/wallet.c:2946 (wallet_invoice_details)",
E "lightningd/invoice.c:1296 (json_add_invoices)",
E "lightningd/invoice.c:1370 (json_listinvoices)",
E "lightningd/jsonrpc.c:625 (command_exec)",
E "lightningd/jsonrpc.c:753 (rpc_command_hook_final)",
E "lightningd/plugin_hook.c:280 (plugin_hook_call_)",
E "lightningd/jsonrpc.c:841 (plugin_hook_call_rpc_command)",
E "lightningd/jsonrpc.c:938 (parse_request)",
E "lightningd/jsonrpc.c:1035 (read_json)",
E "ccan/ccan/io/io.c:59 (next_plan)",
E "ccan/ccan/io/io.c:407 (do_plan)",
E "ccan/ccan/io/io.c:417 (io_ready)",
E "ccan/ccan/io/poll.c:453 (io_loop)",
E "lightningd/io_loop_with_timers.c:22 (io_loop_with_timers)",
E "lightningd/lightningd.c:1194 (main)",
E "../csu/libc-start.c:308 (__libc_start_main)"
E ],
E "label": "wallet/invoices.c:81:struct invoice_details",
E "parents": [
E "common/json_stream.c:41:struct json_stream",
E "ccan/ccan/io/io.c:91:struct io_conn **NOTLEAK**",
E "lightningd/lightningd.c:107:struct lightningd"
E ],
E "value": "0x55a57a77de08"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were double counting channel lease fees because we were double firing
the channel open event sequence (so to speak). If we don't report
balances for unopened channels, we don't have this problem?
Changelog-Changed: Plugins: `balance_snapshot` notification does not send balances for channels that aren't locked-in/opened yet
Be more graceful in shutting down: this should fix the issue where
bookkeeper gets upset that its commands are rejected during shutdown,
and generally make things more graceful.
1. Stop any new RPC connections.
2. Stop any per-peer daemons (channeld, etc).
3. Shut down plugins.
4. Stop all existing RPC connections.
5. Stop global daemons.
6. Free up peer, chanen HTLC datastructures.
7. Close database.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: RPC operations are now still available during shutdown.
This includes the recommendation that we use 10 minute grace period,
so add quotes to where we use that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
We can do this now the function is cleaned up.
Always better to do the work inside param() since then `check`
gets the benefit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Old order of the `status` parameter in the `listforwards` rpc command (deprecated in v0.10.2)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSONRPC: RPC framework now requires the `"jsonrpc"` property inside the request (deprecated in v0.10.2)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Somehow we missed this deprecation, found by grep.
Changelog-Removed: JSON API: Removed double wrapping of `rpc_command` payload in `rpc_command` JSON field (deprecated v0.8.2)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Peter Neuroth
Ken Sedgwick
Michael Schmoock
Vincenzo Palazzo
Carl Dong
Christian Decker
niftynei
Greg Sanders
fiatjaf