Greatly simplify the changeset API. Instead of 'diff' we simply generate
the changes.
Also pulls up the 'next message' method, as at some point the
interactive tx protocol will be used for other things as well
(splices/closes etc)
Suggested-By: @rustyrussell
dual funding needs the max-witness-len and utxo fields set for every
input. we should add them when we create a 'fundpsbt', so that every
psbt that c-lightning generates is dual-funding ready
v2 of channel establishment, in the accpeter case, now sends 2 messages
to our peer after saving the information to disk (our commitment
signatures and our funding transaction signatures)
v2 channel open uses a different method to derive the channel_id, so now
we save it to the database so that we dont have to remember how to
derive it for each.
includes a migration for existing channels
fundpsbt / utxopsbt create a (typically) output-less PSBT,
however for elements we require the fees to be encapsulated in an
output.
this patch updates fundpsbt / utxopsbt to add a fee output for elements
transactions. includes test updates.
Fixes#3998
We defer the notification to gossipd till the end of the spends. By itself not
a huge change, but it allows us to later migrate to doing updates blindly and
using the DB as our ground truth. It also allows us to simplify the
`wallet_outpoint_spend` semantics to not return two values in the next commit.
We're going to want this for bolt13 formation as well.
As a result of reworking the logic into "candidate selection" then
"route hint selection", we need to change the way round-robin works.
We use a simple incrementing index now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This removes the reservation cleanup at startup, too, now they're all
using 'reserved_til'.
This changes test_withdraw, since it asserted that outputs were marked
spent as soon as we broadcast a transaction: now they're reserved until
it's mined. Similarly, test_addfunds_from_block assumed we'd see funds
as soon as we broadcast the tx.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` now randomizes input and output order, not BIP69.
Marking spent means if the transaction doesn't confirm for some
reason, the user will need to force a rescan to find the funds. Now
we have timed reservations, reserving for (an additional) 12 hours
should be sufficient.
We also take this opportunity (now we have our own callback path)
to record the tx in the wallet only on success.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some minor phrasing differences cause test changes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: txprepare reservations stay across restarts: use fundpsbt/reservepsbt/unreservepsbt
Changelog-Removed: txprepare `destination` `satoshi` argument form removed (deprecated v0.7.3)
If all is set, diff may not be:
==1230518== Use of uninitialised value of size 8
==1230518== at 0x4C5781B: _itoa_word (_itoa.c:179)
==1230518== by 0x4C736F4: __vfprintf_internal (vfprintf-internal.c:1687)
==1230518== by 0x4C88119: __vsnprintf_internal (vsnprintf.c:114)
==1230518== by 0x1D44B6: do_vfmt (str.c:66)
==1230518== by 0x1D45A0: tal_vfmt_ (str.c:92)
==1230518== by 0x1D4401: tal_fmt_ (str.c:44)
==1230518== by 0x15D30F: fmt_amount_sat (amount.c:60)
==1230518== by 0x15D338: fmt_amount_sat_ (amount.c:62)
==1230518== by 0x178C45: type_to_string_ (type_to_string.c:35)
==1230518== by 0x1B8F75: json_fundpsbt (reservation.c:394)
==1230518== by 0x12D0EC: command_exec (jsonrpc.c:602)
==1230518== by 0x12D598: rpc_command_hook_callback (jsonrpc.c:712)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Generating these requires python tooling which may not be present, so only
clean them in maintainer mode. Also remove `wallet/statements.po` which is no
longer used or generated at all.
And rename them so they're not cleared by `make clean`. We leave the
old rules in place so old files get cleaned still.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: build: On some operating systems the postgresql library would not get picked up. `./configure` now uses `pg_config` to locate the headers.
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This means some files get renamed, and I took the opportunity to clarify
our naming (the *d* is important!)
1. channeld/channel_wire.csv -> channeld/channeld_wire.csv
2. channeld/gen_channel_wire.h -> channeld/channeld_wiregen.h
3. enum channel_wire_type -> enum channeld_wire
4. WIRE_CHANNEL_FUNDING_DEPTH -> WIRE_CHANNELD_FUNDING_DEPTH.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Otherwise valgrind gets upset when we *run* the statements: better
to get a backtrace when we bind, so we can tell which field it is!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We've never hit this, we do check them on insert, and it's slowing
down some operations unnecessarily.
$ time lightning-cli -R --network=regtest --lightning-dir /tmp/ltests-k8jhvtty/test_pay_stress_1/lightning-1/ listpays > /dev/null
Before:
real 0m1.781s
user 0m0.127s
sys 0m0.013s
After:
real 0m1.545s
user 0m0.124s
sys 0m0.024s
Also, the raw listsendpays drops from 0.983s to 0.676s.
(With -O3 -flto, listsendpays is 0.416s, listpays 0.971s).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is an extra safety check for dual funding, where we only want to sign
the inputs we provided!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `signpsbt` takes an optional `signonly` array to limit what inputs to sign.
Required for dual funding where the opener sets it.
Changelog-Added: JSON-RPC: `fundpsbt` takes a new `locktime` parameter
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This more closely mirrors fundpsbt (which will only select unreserved ones)
but you can turn it off if you want to e.g. rbf in future.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: New low-level command `utxopsbt` to create PSBT from existing utxos.
It's *possible* to do this using various RPC calls, but it's
unfriendly:
1. Call getinfo to get the current block height.
2. Call listfunds to map the UTXOs.
3. Create the PSBT and hope you get all the fields correct.
Instead, this presents an interface just like `fundpsbt`, with identical
returns.
I think it's different enough to justify a new command (though it
shares much internally, of course).
In particular, it's now quite simple to create a command which uses
specified utxos, and then adds more to meet any shortfall.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to remember this in the db (it's a P2WSH for option_anchor_outputs),
and we need to set nSequence to 1 to spend it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
Christian Decker
Rusty Russell
Matt Whitlock
ZmnSCPxj jxPCSnmZ