We had a bit of a hand-woven mess in there, trying to inject the extra
arguments in the correct places. We now instead treat positional and keyword
calls separately and can go back to using the builtin argument binding again.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The old codes if % 1000 statement logic was simply inverted
and produced the opposite output of the intention behin it.
Before Fix:
- Millisatoshi('42sat').to_btc_str() => 0.00000042000btc
- Millisatoshi('42001msat').to_btc_str() => 0.00000042btc
After Fix:
- Millisatoshi('42sat').to_btc_str() => 0.00000042btc
- Millisatoshi('42001msat').to_btc_str() => 0.00000042001btc
Currently, when a multiplication operator is invoked that
does not result in an even integer result but a floating result,
the pylightning code will raise an exception:
Millisatoshi must be string with msat/sat/btc suffix or int
This is because the internal float result will be used as
contructor argument like this: return Millisatoshi(10000.5)
This happens especially on fee calculations where small uneven amounts
are calculated.
Millisatoshi's inner representation expected to be an int, otherwise unwanted exceptions could occur
The following example raises: TypeError: __int__ returned non-int (type decimal.Decimal)
from lightning import Millisatoshi
one_sat = Millisatoshi("1sat")
two_sats = one_sat * 2
make it easier to fire up a local test environment to try out
c-lightning.
requires bitcoind to be installed. to use, you have to run it
via `source contrib/startup_regtest.sh`, so that the aliases
are set correctly.
* Improved plugin install in docker
- All files generated by 'make install' are copied
- Fixes issues with incomplete installation.
- Example: New executables created by build but are missing in docker.
With the preceeding UTF-8 fix, I'd like to detect UTF-8 support. But
AFAICT Python doesn't have a standard way of doing version exposure.
So I added __version__, but now we need to make sure it matches. I
used the hackiest possible method.
[ Christian Decker fixed version to be sane, so previous comment no longer
applies! --RR ]
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We need to read in as a byte string, then decode into utf8 once we
have a marker. Otherwise we seem to mangle it horribly, and we
might have a bad utf8 string anyway.
2. We need to suppress the JSON \u escapes on output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rather than using LightningJSONDecoder's implicit "field name and
value ends in msat, try converting to Millisatoshi", we do it to
parameters using type annotations.
If you had a parameter which was an array or dict itself, we don't
delve into that, but that's probably OK.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I originally converted input JSON naively into Millisatoshi, and the
result was a strange failure in Millisatoshi.__eq__.
It seems this is because inspect._empty.__eq__(Millisatoshi) raises
NotImplemented, and so it tries Millisatoshi.__eq__(inspect._empty)
which doesn't like it.
'is' is the correct test here, AFAICT, and doesn't suffer from these
problems.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Some JSON functions want a *class*, not just a hook, so provide one.
To make it clear that we want an encoding *class* and a decoding *object*,
rename the UnixDomainSocketRpc encode parameter to encode_cls.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we can't marshall an object into JSON, the exception causes a deadlock
and we don't get any results.
Instead of deadlocking, our failure now is:
lightning.lightning.RpcError: RPC call failed: method: echo, payload: {'msat': 17msat}, error: Error while processing echo: TypeError("Object of type 'Millisatoshi' is not JSON serializable",)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I tried annotating the plugin-millisatoshis.py plugin, and it failed like so:
plugin-millisatoshis.py Killing plugin: "getmanifest" result is not an object: {"jsonrpc": "2.0", "id": 1, "error": "Error while processing getmanifest: ValueError(\'Function has keyword-only parameters or annotations, use getfullargspec() API which can support them\',)"}'
So, let's do that!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the same deprecation, but one level up. For the moment, we
still support invoices with a `h` field (where description will be
necessary) but that will be removed once this option is removed.
Note that I just changed pylightning without backwards compatibility,
since the field was unlikely to be used, but we could do something
more complex here?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Without this the RPC will fail to continue buffering if the response does not
fit in the first read, and if we don't switch over to the non-compat
mode. This was introduced by our mitigation of the UTF-8 misalignment, but I
missed this path.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
These weren't checked by CI yet, and they are really short so I just added
them to the check-python target.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This indicates that the method or hook will accepts a request
parameter, and will use that to return the result or raise an
exception instead of returning the return value. This allows the hook
or method to stash the incomplete request or pass it around, without
blocking the JSON-RPC interface.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This isn't a problem for now since we don't support multithreading,
and only allow synchronous calls, but eventually this'll become
important.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We well need this in the next commit to be able to return from an
asynchronous call. We also guard stdout access with a reentrant lock
since we are no longer guaranteed that all communication happens on
the same thread.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Sending around unnamed tuples is bound to cause some issues sooner or
later, so we just create a quick class that holds all the information
about a plugin method.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Little point having users handle the postfixes manually, this
translates them, and also allows Millisatoshi to be used wherever an
'int' would be previously.
There are also helpers to create the formatting in a way c-lightning's
JSONRPC will accept.
All standard arithmetic operations with integers work.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We read a JSON message from the buffer, after converting it from raw bytes to
UTF-8, and returning the remainder of the byte array back to the
caller. However the return value of `raw_decode` refers to symbols in the
UTF-8 decoded string, not the raw bytes underlying byte-array, which means
that if we have multi-byte encoded UTF-8 symbols in the byte-array we end up
with a misaligned offset and will return part of the message as
remainder. This would then end up being interpreted as the result of the next
call.
This could not be exploited currently since we use a socket only for a single
JSON-RPC call and will close the connection afterwards, but since we want to
eventually recycle connections for multiple calls, this could have been very
dangerous.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Reported-by: Corné Plooy <@bitonic-cjp>
The next patch wants to decorate the methods with a compulsory
'usage' option, which doesn't make sense for init. So I wanted
to change the init to its own decoration.
Made-to-work-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was failing the docker hub builds, since the git-config retains
an absolute path to the worktree location when cloning. Copying it
over from the host system means that this path now points to a
non-existent location, which then interfered with the submodule
initialization.
This fixes it by not using the copy directly, but rather it creates a
clean clone from the copied location, including a submodule init.
Signed-off-by: Christian Decker <@cdecker>
Logging an empty line (without newline character) would raise an
Exception due to out of bounds check.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Valgrind seems to be slowing the pay-plugin down enough for the 10
seconds timeout to get triggered on a semi-regular basis.
Reported-by: Rusty Russell <@rustyrussell>
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Instead of creating a new map I opted to re-use the Plugin.methods
map, since the semantics are really similar and we don't allow
duplicates. The only difference is in how they are announced to
lightningd, so we use an enum to differentiate rpcmethods from hooks,
since only the former will get added to the JSON-RPC dispatch table in
lightningd.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
After this code change people can use `plugin.rpc` from anywhere in
their plugin code this is much nicer than going this way:
```
@plugin.method("init")
def init(options, configuration, plugin):
global rpc
basedir = plugin.lightning_dir
rpc_filename = plugin.rpc_filename
path = os.path.join(basedir, rpc_filename)
rpc = LightningRpc(path)
```
or similarly that way:
```
@plugin.method("init")
def init(options, configuration, plugin):
global rpc
basedir = configuration['lightning-dir']
rpc_filename = configuration['rpc-file']
path = os.path.join(basedir, rpc_filename)
rpc = LightningRpc(path)
```
Also the imports have been sorted alphabetically
Co-authored-by: Rene Pickhardt <rene@rene-pickhardt.de>
Co-authored-by: Christian Decker <decker.christian@gmail.com>
If the `request` or `plugin` parameter that are injected by the
framework where before or inbetween positional arguments we'd be
injecting them incorrectly, i.e., we'd be providing them both as
`args` (and mismapping another argument) as well as `kwargs`.
This is a better way to map arguments, which takes advantage of the
fact that JSON-RPC calls are either all positional or named arguments.
I also included a test for various scenarios, that hopefull cover the
most common cases.
Reported-by: Rene Pickhardt <@renepickhardt>
Signed-off-by: Christian Decker <decker.christian@gmail.com>
The example code had the `plugin` argument as the last argument. this disallows arguments that have a standard value. As far as I understand the dispatching code the order of arguments does not matter since it is the name `plugin` that is relevant. Therefor I changed the order so that newbe's don't have to read the entire code and can easily add optional arguments
Just like we added the RPC methods, the notification handlers can also
be registered using a function decorator, and we auto-subscribe when
asked for a manifest.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This was causing `listchannels` to be incredibly slow. The response is
several megabyte in size, and we were only buffering 1Kb on each
iteration.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
It's flask inspired with the Plugin instance and decorators to add
methods to the plugin description.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Fixes some lint errors with unused variables:
contrib/plugins/fail/failtimeout.py:48:5:
F841 local variable 'e' is assigned to but never used
contrib/plugins/helloworld.py:86:5:
F841 local variable 'e' is assigned to but never used
Signed-off-by: William Casarin <jb55@jb55.com>
This tells the plugin both the `lightning-dir` as well as the
`rpc-filename` to use to talk to `lightningd`. Prior to this they'd
had to guess.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We inadvertently broke the compatibility between the python library
and the binary when switching to \n\n-delimiters. This reintroduces
the old inefficient parsing, and dynamically upgrades to the faster
version if it detects the \n\n-delimiter.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Both of these plugins will fail in interesting ways, and we should
still handle them correctly.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This doesn't make a performance difference, but even better, it
simplifies the code.
We hacked test_multirpc to send 200x as many commands, and timed the
pytest over 20 runs:
Before:
=================== 1 passed, 136 deselected in 8.550000-9.400000(9.0045+/-0.2) seconds ===================
After:
=================== 1 passed, 136 deselected in 8.540000-9.370000(8.97286+/-0.16) seconds ===================
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to keep the remaining buffer, and we need to try to parse it
before we read the next. I first tried keeping it in the object, but
its lifetime is that of the *socket*, which we actually reopen for
every command.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We also make `--help` a non-early arg so it allows for the plugins to
register their options before printing the help message. The options
themselves are stored in a separate struct inbetween them being
registered and them being forwarded to the plugin. Currently only
supports string options.
Signed-off-by: Christian Decker <@cdecker>
And there's a difference between no description and "" as a description:
for no description, listpayments doesn't show the field at all. So fix
that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
darosior
Sjors Provoost
Christian Decker
Michael Schmoock
Hampus Sjöberg
Gálli Zoltán
lisa neigut
Douglas Schilling Landgraf
nicolas.dorier
Billy Garrison
wailo
Rusty Russell
Conor Scott
arowser
Rene Pickhardt
William Casarin