Adds schema definitions and manpages for bkpr- commands; also renames
the commands to all start with 'bkpr-', so they're easier to identify/
make runes about.
For income events, break out the amount paid in routing fees vs the
total amount of the *invoice* that is paid.
Also printout these fees, when available, on listaccountevents
Since it's a deprecation, we simply ignore one, rather than properly
checking they match etc.
Fixes: #5386
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We deprecated msatoshi, but getroute() still returns both (unless
--allow-deprecated-apis=False), so we need to accept both.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's one case where we can present more infomation, so do that, and
fix documentation.
Changelog-Added: JSON-RPC: `listforwards` now shows `out_channel` in more cases: even if it couldn't actually send to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5329
1. We set an outgoing htlc's `failonion` when we get a commitment_signed.
2. We don't transfer it to the corresponding incoming HTLC until we send
commitment_signed and receive revoke_and_ack (meaning, outgoing htlc is
completely dead).
3. If between these steps we go onchain, onchaind (after 3 blocks) tells us
to fail the HTLC.
4. hout->failonion is set, but hout->hin has not been failed yet. We
do a sanity check and print a nasty message, and fail it with
WIRE_PERMANENT_CHANNEL_FAILURE instead of relaying the error.
So handle this case explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We assumed that if the outgoing htlc has failed, we should have always
failed the incoming one. This is not true, as this testcase demonstrates:
```
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-onchaind-chan#2: Sending 1 missing htlc messages
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: onchain_failed_our_htlc
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: HTLC id 0 failonion = 0x55cb8bc045d8, failmsg = (nil), preimage = (nil)
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: HTLC id 0 already complete, but ->in not resolved! failonion = 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, failmsg = (null), preimage = (null)
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d-chan#2: MISSING incoming fail for 0: failing incoming now
lightningd-2: 2022-05-25T04:38:31.449Z **BROKEN** 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: MISSED incoming fail for 0: failing now
lightningd-2: 2022-05-25T04:38:31.449Z DEBUG 0266e4598d1d3c415f572a8488830b60f7e744ed9235eb0b1ba93283b315c03518-chan#1: HTLC in 0 RCVD_ADD_ACK_REVOCATION->SENT_REMOVE_HTLC
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can sneak the HTLC add in before we do the update_fee which fails:
```
# the channel should start warning -- too much dust
inv = l2.rpc.invoice(htlc_val_msat, str(num_dusty_htlcs + 1), str(num_dusty_htlcs + 1))
with pytest.raises(RpcError, match=r'WIRE_TEMPORARY_CHANNEL_FAILURE'):
> l1.rpc.sendpay(route, inv['payment_hash'], payment_secret=inv['payment_secret'])
E Failed: DID NOT RAISE <class 'pyln.client.lightning.RpcError'>
tests/test_pay.py:2654: Failed
```
From the logs:
```
lightningd-1: 2022-05-20T02:16:40.008Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: NEW:: HTLC LOCAL 14 = SENT_ADD_HTLC/RCVD_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.010Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: Adding HTLC 14 amount=10000000msat cltv=113 gave CHANNEL_ERR_ADD_OK
lightningd-1: 2022-05-20T02:16:40.012Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_UPDATE_ADD_HTLC
lightningd-1: 2022-05-20T02:16:40.015Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: REPLY WIRE_CHANNELD_OFFER_HTLC_REPLY with 0 fds
lightningd-1: 2022-05-20T02:16:40.026Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: peer_out WIRE_WARNING
lightningd-1: 2022-05-20T02:16:40.029Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-channeld-chan#1: billboard perm: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.035Z INFO 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-chan#1: Peer transient failure in CHANNELD_NORMAL: channeld WARNING: Too much dust to update fee (Desired feerate update 20000)
lightningd-1: 2022-05-20T02:16:40.039Z DEBUG 022d223620a359a47ff7f7ac447c85c46c923da53389221a0054c11c1e3ca31d59-lightningd: Will try reconnect in 60 seconds
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Over time, it has cost us more developer cycles than it has gained.
It has hidden intermittant bugs, and allowed cruft to accumulate:
when we eventually tried to figure out what was going wrong, the
actual change which caused it was now stale and forgotten.
This was a particular bane during the connectd rewrite, and I
worked through some issues which had occurred before, but were not
more likely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This changes many fields: in non-deprecated mode, they're now raw integers.
This was always the intention, but the transition was never completed.
Suggested-By: @ShahanaFarooqui
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: "_msat" fields can be raw numbers, not "123msat" strings (please handle both!)
Changelog-Deprecated: JSON-RPC: "_msat" fields as "123msat" strings (will be only numbers)
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
We were setting it on the root, but that doesn't get handed to
sendpay. Our schema doesn't *require* bolt11, either, so this was
missed (there could be a *bolt12* instead).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: JSON-RPC: `listpays` always includes `bolt11` or `bolt12` field.
This is what LND does, and it's better for upper layers than trying to
twist our maxfeepercent / exemptfee heuristics to suit.
(I don't remember who complained about this, sorry!)
I'm doing this now because I want to add YA parameter next!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has new parameter `maxfee` for setting absolute fee (instead of using `maxfeepercent` and/or `exemptfee`)
I think the new pay command has proven itself in the last 18 months!
Also various pay tests took "compat" then didn't use it, so clean them
up.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSON-RPC: `legacypay` (`pay` replaced it in 0.9.0).
Trips on our RPC checking introduced at the same time: msat should be
an integer or an "xxxmsat"/sat/btc string.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Partial revert of 43a833e405
"lightningd: remove support for legacy onion format."; we restore the
ability to decode legacy onions for forwarding, but not to generate them.
(We don't accept them properly since making payment_secret compulsory
anyway, so no real change there!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: ... but we still forward legacy HTLC onions for now.
Using a canned sendonion call from an old version (v0.10.2), where I
forced it to use legacy onion for l2.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the part which works: we have another old PR (or simply
uncomment the FIXME section) for the routehint case.
Closes: #4781
See-also: #4808
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
We still use the channel hint here (as it's the only option), we just
warn about lack of capacity.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We need to add some, since our internal representations of
htlc_maximum_msat round up, and we need to disable mpp which succeeds
in getting a payment through by splitting.
We also allow dev_routes to suppress invoice routehints altogether.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This restores the behaviour prior to `lightningd: use our cached
channel_update for errors instead of asking gossipd.`, where gossipd
would refuse to give us channel_updates for unannounced channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the HTLCs are completely negotiated, we can get a channel break when
we mine a pile of blocks. This is mainly seen with Postgres, due to the db
speed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If we fund a channel between two nodes, then mine all the blocks to
announce it, any other nodes may see the announcement before the
blocks, causing CI to complain about "bad gossip":
```
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Ignoring future channel_announcment for 113x1x1 (current block 112)
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 113x1x1/0
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Bad gossip order: WIRE_CHANNEL_UPDATE before announcement 113x1x1/1
lightningd-4: 2022-01-25T22:33:25.468Z DEBUG 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e-gossipd: Bad gossip order: WIRE_NODE_ANNOUNCEMENT before announcement 032cf15d1ad9c4a08d26eab1918f732d8ef8fdc6abb9640bf3db174372c491304e
```
Add a new helper for this case, and use it where there are more than 2 nodes.
Cleans up test_routing_gossip and a few other places which did this manually.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We also no longer strip the type off: everyone handles both forms, and
Eclair doesn't strip (and it's easier!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We seem to hit a race between manual reconnect (with address hint) and an automatic
reconnection attempt which fails:
```
> l4.rpc.connect(l3.info['id'], 'localhost', l3.port)
...
E pyln.client.lightning.RpcError: RPC call failed: method: connect, payload: {'id': '035d2b1192dfba134e10e540875d366ebc8bc353d5aa766b80c090b39c3a5d885d', 'host': 'localhost', 'port': 41285}, error: {'code': 401, 'message': 'All addresses failed: 127.0.0.1:36678: Connection establishment: Connection refused. '}
```
See how it didn't even try the given address?
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
channeld can't do it any more: it's using local sockets. Connectd
can do it, and simply does it by type.
Amazingly, on my machine the timing change *always* caused
test_channel_receivable() to fail, due to a latent race.
Includes feedback from @cdecker.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CI seems to be OOM killing us; 5 may be too many under valgrind.
VALGRIND=1 pytest tests/test_pay.py::test_fetchinvoice
Before:
1 passed in 199.33s (0:03:19)
After:
1 passed in 177.91s (0:02:57)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fails liquid-regtest otherwise; liquid tends to hit the dust limit
earlier than non-liquid tx, and MPP exacerbates this by divvying up
payments into dusty bits then attempting to shove them through the same
channel, hitting the dust max. The MPP then fails as not all the parts
were able to arrive at their destination.
Let's make this a softer launch by just warning on the channel til the
feerates go back down.
You can also 'fix' this by upping your dust limit with
the `max-dust-htlc-exposure-msat` config.
Fixes#4482Fixes#4481
Changelog-Added: pay: Payment attempts are now grouped by the pay command that initiated them
Changelog-Fixed: pay: `listpays` returns payments orderd by their creation date
Changelog-Fixed: pay: `listpays` no longer groups attempts from multiple attempts to pay an invoice
Main changes are:
1. Uses point32 instead of pubkey32.
2. Uses issuer instead of vendor.
3. Uses byte instead of u8.
4. blinded_path num_hops is now a byte, not u16 (we don't use that yet!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: bolt12: `vendor` is deprecated: the field is now called `issuer`.
This was measured as a 95th percentile in our rough testing, thanks to
all the volunteers who monitored my channels.
Fixes: #4761
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannelfee` gives a grace period (`enforcedelay`) before rejecting old-fee payments: default 10 minutes.
Changelog-Added: Support to listpays the status parameter to filter the payments by status.
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
We never tested that we can correctly unwrap on the next step after
unblinding: it failed because we mangled the onion in place! Fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The function is already provided in
contrib/pyln-testing/pyln/testing/utils.py (which is also
imported in this module), so there is no need to define it
a second time.
It subsumes `decodepay`, and it's nicer if people can just assume it's
available at all times.
Changelog-Added: JSON-RPC: `decode` now available without `experimental-offers`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, Shesek tried an empty offer description, and the
resulting signature didn't match since it was omitted entirely from
the bolt12 string!
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
As requested by @shesek: it's weird to fail if they ask for the exact
same thing (which is quite possible, since offers don't expire by
default).
And add a new "created" field so they can tell if they have an old
one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't automatically *reject* an invoice which asks for a different
msat than we specified (caller may!), but we don't bother noting it
unless it is different.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You could have quantity_min of 0, which makes no sense; spec has been
updated, so quote and enforce that.
Reported-by: @shesek
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is in preparation for removing support (next release?).
Changelog-Changed: Protocol: We now assume nodes support TLV onions (non-legacy) unless we have a node_announcement which says they don't.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We don't do it for sendinvoice (yet?).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: `fetchinvoice` can take a payer note, and `listinvoice` will show the payer_notes received.
As per latest spec revision.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: BOLT12 offers can now be unsigned, for really short QR codes.
100+ is for experimentation, modern spec practice is to assign feature bits
sequentially as PRs get added, to avoid later renumbering.
Still respect the old bit for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And even if we can't find *ourselves* because we have no channels
(we won't be able to pay, sure, but we can request an invoice!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And add the local_offer_id to the schemas too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSONRPC: `listoffers` now shows `local_offer_id` when listing all offers.
As you can see, I did a lot of debugging before realizing that the
actual problem is in the pay plugin :(
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
niftynei
Rusty Russell
Michael Schmoock
Simon Vrouwe
Andrew Toth
Christian Decker
Vincenzo Palazzo
Sebastian Falbesoner