This is a nice reflection of channel stability: in particular, worse case
ping time is 45 seconds, so we should have had some traffic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, we were sending `announcement_signatures` before
`channel_reestablish`; we allow this because LND used to do it, but
it's not spec compliant.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This commit is a bit messy, but it tries to do the minimal switchover.
Some tests change, so those are included here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: hsmd: Added hsmd_forget_channel to enable explicit channel deletion. ([#6987])
Motivation: Previously, a signer prematurely forgetting a channel led
to failures in unresolved channel requests. This update introduces
hsmd_forget_channel, allowing nodes to explicitly notify signers when
a channel is irrevocably resolved and can be safely forgotten. This
ensures synchronized channel cleanup between nodes and signers.
This change maintains backward and forward compatibility. Nodes
explicitly check whether a signer has `WIRE_HSMD_FORGET_CHANNEL`
capability before sending the message. Nodes without
`WIRE_HSMD_FORGET_CHANNEL` capability won't send this message. Signers
capable of handling this message but not receiving it will continue to
use conservative pruning methods.
Fixes#6987
Not just when it's a private channel. This is useful for listpeerchannels in the next patch.
Most of this is renaming.
It also means that source can be NULL, so move it out of the struct and put it in the message,
where it logically belongs, and make it an optional field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
and stash in the database.
Rusty: I added the bad gossip message so we would see unknown updates in CI, and made sure we don't send our own generated updates to lightningd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adds tests for when the connection fails during
1) splice tx_signature
2) splice commitment_signed
Fleshed out the reestablish flow for these two cases and implemented the fixes to make these reestablish flows work.
Part of this work required changing commit process for splices: Now we send a single commit_part for the splice where previously we sent all commits, and accordingly, we no longer revoke in response.
Changelog-Fixed: Implemented splicing restart logic for tx_signature and commitment_signed. Splice commitments are reworked in a manner incompatible with the last version.
When we reconnect, if we get a note from the peer that they dont know
about a pending inflight, we need to be able to clean it up so we can
restart/re-negotiate a new RBF etc.
This adds a cleanup method to remove any inflights for a channel without
a last_tx (commitment tx)
Now we're not always using the same functions to watch during
dual-funding opening, we need to make sure we're watching the close
(in particular, df close before the opening is confirmed).
So, keep a pointer, and if it's not set in drop_to_chain, set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We usually hand times by copy, not by pointer (and if we did, they should
be const!). I noticed this particularly for the state changed code, but
it goes down to to json_add_timeiso, so I fixed that too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should use capability tests for states (can you add htlcs?) rather than vague
descriptions (are you closing?).
And as much as possible, use switch () statements to force us to think
about all the cases, especially when we add new states!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not just if htlc addition is too slow, make this the default. dual-open's txabort
is excluded, however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don’t send the funding spend to onchaind if we detect it in inflights (aka. a splice). While we already prevented onchaind_funding_spent from being called directly, the call to wallet_channeltxs_add meant onchaind_funding_spent would be called *anyway* on restart. This is now fixed.
Additionally there was a potential for a race problem depending on the firing order of the channel depth and and funding spent events.
Instead of requiring these events fire in a specific order, we make a special “memory only” inflight object to prevent the race regardless of firing order.
Changelog-Fixed: Splice: bugfix for restart related race condition interacting with adversarial close detection.
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
`struct log` becomes `struct logger`, and the member which points to the
`struct log_book` becomes `->log_book` not `->lr`.
Also, we don't need to keep the log_book in struct plugin, since it has
access to ld's log_book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
This is an internal type: it has no API guarantees (indeed, I'm about
to change it, which is how I discovered scb was using it).
Fortunately for every case we care about, it is actually a wireaddr
(in theory the peer can connect locally using a local socket, but this
is mostly for testing and is a very strange setup, and so simply don't
do scb for those).
In this case, the wire encoding is a single byte followed by the
wireaddr, so open-code that in scb_wire.csv for compatibility.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We always call channel_fail_transient() on all channels when a peer
connects, to clean up any previous connections. However, when
we startup, this channel doesn't have an owner yet, resulting in
a fairly weird INFO level message.
Reported-by: Michael Schmook @mschmook
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: `lightningd`: don't log gratuitous "Peer transient failure" message on first connection after restart.
It's not likely but possible that the node's settings will shift btw a
start and an RBF; we persist the setting to the database so we don't
lose it.
Right now holding onto it forever is kind of extra but maybe we'll
reuse the setting for splices? idk.
Should this be a channel type??
technically we don't need this info after the channel opens, but for any
subsequent RBF (and maybe splice?) we need to remember what the
open/accept peer signaled
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
After connecting 100,000 peers with one channel each (not all at
once!), we see various places where we exhibit O(N^2) behaviour.
Fix these by keeping a map of id->peer instead of a simple
linked-list.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
First, merge the _ahf_ and non-ahf interfaces.
Second, remove the always-NULL txs->cmd field.
Then, add optional id_prefix for bitcoind_sendrawx, so if it's
triggered by a command (e.g. "withdraw") it's shown correctly in logs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
Rusty Russell
Ken Sedgwick
Alex Myers
Dusty Daemon
niftynei
Greg Sanders