This is a nice reflection of channel stability: in particular, worse case
ping time is 45 seconds, so we should have had some traffic.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
In particular, we were sending `announcement_signatures` before
`channel_reestablish`; we allow this because LND used to do it, but
it's not spec compliant.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This commit is a bit messy, but it tries to do the minimal switchover.
Some tests change, so those are included here.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not just when it's a private channel. This is useful for listpeerchannels in the next patch.
Most of this is renaming.
It also means that source can be NULL, so move it out of the struct and put it in the message,
where it logically belongs, and make it an optional field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
and stash in the database.
Rusty: I added the bad gossip message so we would see unknown updates in CI, and made sure we don't send our own generated updates to lightningd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Adds tests for when the connection fails during
1) splice tx_signature
2) splice commitment_signed
Fleshed out the reestablish flow for these two cases and implemented the fixes to make these reestablish flows work.
Part of this work required changing commit process for splices: Now we send a single commit_part for the splice where previously we sent all commits, and accordingly, we no longer revoke in response.
Changelog-Fixed: Implemented splicing restart logic for tx_signature and commitment_signed. Splice commitments are reworked in a manner incompatible with the last version.
When we reconnect, if we get a note from the peer that they dont know
about a pending inflight, we need to be able to clean it up so we can
restart/re-negotiate a new RBF etc.
This adds a cleanup method to remove any inflights for a channel without
a last_tx (commitment tx)
From the spec:
Once peers are ready to exchange commitment signatures, they must remember
the details of the funding transaction to allow resuming the signatures
exchange if a disconnection happens.
Basically this means we add channels to the database before we've gotten
commitments for them; it's nice that there's now a state for commitments
recevied but we now save the channel prior to that.
This commit makes it possible to track the pre-commit-rcvd but not quite
open-init state.
peer_htlcs has become a bit of a dumping ground: move listforwards
etc to its own file.
Also move `struct channel_info` from peer_htlcs.h to channel.h where
it more logically belongs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now we're not always using the same functions to watch during
dual-funding opening, we need to make sure we're watching the close
(in particular, df close before the opening is confirmed).
So, keep a pointer, and if it's not set in drop_to_chain, set it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The latter is used when we're put in the db, the former is the uncommitted state.
Currently dbid == 0 is used in addition to the state, which is unwieldy.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Experimental: JSON-RPC: added new dual-funding state `DUALOPEND_OPEN_COMMITTED`
We should use capability tests for states (can you add htlcs?) rather than vague
descriptions (are you closing?).
And as much as possible, use switch () statements to force us to think
about all the cases, especially when we add new states!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Not just if htlc addition is too slow, make this the default. dual-open's txabort
is excluded, however.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Don’t send the funding spend to onchaind if we detect it in inflights (aka. a splice). While we already prevented onchaind_funding_spent from being called directly, the call to wallet_channeltxs_add meant onchaind_funding_spent would be called *anyway* on restart. This is now fixed.
Additionally there was a potential for a race problem depending on the firing order of the channel depth and and funding spent events.
Instead of requiring these events fire in a specific order, we make a special “memory only” inflight object to prevent the race regardless of firing order.
Changelog-Fixed: Splice: bugfix for restart related race condition interacting with adversarial close detection.
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Update gossip routiens and various other hecks on the channel state to consider AWAITING_SPLICE to be routable and treated similar to CHANNELD_NORMAL.
Small updates to psbt interface
Changelog-None
If they have invalid runes, we bail, but if they have runes which used
a different master secret (old commando.py allowed you to override
secret), we just complain and delete them.
Note that this requires more mocks in wallet/test/run-db.c...
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`struct log` becomes `struct logger`, and the member which points to the
`struct log_book` becomes `->log_book` not `->lr`.
Also, we don't need to keep the log_book in struct plugin, since it has
access to ld's log_book.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is the simple version which always tries to keep some sats if we
have an anchor channel. Turns out that we need something more
sophisticated for multifundchannel, so that's next.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `withdraw` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels (and `all` will be reduced appropriately).
Changelog-Changed: JSON-RPC: `fundpsbt` and `utxopsbt` will refuse to spend funds below `min-emergency-msat` if we have any anchor channels.
It's not likely but possible that the node's settings will shift btw a
start and an RBF; we persist the setting to the database so we don't
lose it.
Right now holding onto it forever is kind of extra but maybe we'll
reuse the setting for splices? idk.
Should this be a channel type??
technically we don't need this info after the channel opens, but for any
subsequent RBF (and maybe splice?) we need to remember what the
open/accept peer signaled
not amazing, since we'll probably call openchannel_update multiple
times per open, but this is the simplest way to confirm that we're
not sending unconfirmed outputs to peer.
We didn't actually populate them properly, and the real annotations
are on inputs and outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: JSON-RPC: `listtransactions` `channel` and `type` field removed at top level.
Otherwise what the hook sees is actually a lie, and if it sets it
we might override it.
The side effect is that we add an explicit "forward_to" field, and
allow hooks to override it. This lets a *hook* control channel
choice explicitly.
Changelod-Added: Plugins: `htlc_accepted_hook` return can specify what channel to forward htlc to.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were double counting channel lease fees because we were double firing
the channel open event sequence (so to speak). If we don't report
balances for unopened channels, we don't have this problem?
Changelog-Changed: Plugins: `balance_snapshot` notification does not send balances for channels that aren't locked-in/opened yet
This contains the zeroconf stuff, with funding_locked renamed to
channel_ready. I change that everywhere, and try to fix up the
comments.
Also the `alias` field is called `short_channel_id`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: `funding_locked` is now called `channel_ready` as per latest BOLTs.
Again, we should use the real channel_type, but we approximate.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: private channels will only route using short-channel-ids if channel opened with option_scid_alias-supporting peer.
The only places which should call try_reconnect now are the "connect"
command, and the disconnect path when it decides there's still an
active channel.
This introduces one subtlety: if we disconnect when there's no active
channel, but then the subd makes one, we have to catch that case!
This temporarily reverts "slow" reconnections to fast ones: see next
patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's directly a product of "does it have a current owner subdaemon"
and "does that subdaemon talk to peers", so create a helper function
which just evaluates that instead.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to agree up on the `minimum_depth` with the peer, thus when
they told us that the funding locked we'd be sure we either have a
scid or we'd trigger the state transition when we do. However if we
had a scid, and we got a funding_locked we'd trust them not to have
sent it early. Now we explicitly track the depth in the channel while
waiting for the funding to confirm.
Changelog-Fixed: channeld: Enforce our own `minimum_depth` beyond just confirming
We use this in a couple of places, when we want to refer to a channel
by its `short_channel_id`, I'm moving this into a separate function
primarily to have a way to mark places where we do that.
`alias_local` is generated locally and sent to the peer so it knows
what we're calling the channel, while `alias_remote` is received by
the peer so we know what to include in routehints when generating
invoices.
Rusty Russell
Alex Myers
Dusty Daemon
niftynei
adi2011
Christian Decker