This limit applies to both node_announcements (which we now send 1 per
day), and channel_updates; I've had reports of LND nodes going down
daily for database compation, so they end up ratelimited.
Changelog-Protocol: We now allow two channel_updates or node_announcements per day, up from 1.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even if nothing has changed. Note that this is different from simply
re-xmitting the old one, in that it has a different timestamp, so others
will re-xmit it too.
This is a side-effect of reports that node_announcement propagation
through the network is poor:
https://github.com/ElementsProject/lightning/issues/5037
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Protocol: We now refresh our ndoe_announcement every 24 hours, due to propagation issues.
node_announcement has to follow at least one channel_announcement.
When channels close, if this isn't the case, we remove the old
node_announcement and put it at the end of the gossip_store.
But we lose the "send even if they don't want it" bit in the case it's
our own node_announceent, so keep it.
This only happens if you don't change your node configuration at all
since you opened your first channel, but still worth fixing.
We expose the force_node_announce_rexmit() for later use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This restores the behaviour prior to `lightningd: use our cached
channel_update for errors instead of asking gossipd.`, where gossipd
would refuse to give us channel_updates for unannounced channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`hc` is never NULL, since it's `hc = &chan->half[direction];`;
we really meant "is it initialized", and valgrind under CI finally
caught it:
```
==69243== Conditional jump or move depends on uninitialised value(s)
==69243== at 0x11C595: handle_local_channel_update (gossip_generation.c:758)
==69243== by 0x115254: recv_req (gossipd.c:986)
==69243== by 0x128F8D: handle_read (daemon_conn.c:31)
==69243== by 0x16BEE1: next_plan (io.c:59)
==69243== by 0x16CAE9: do_plan (io.c:407)
==69243== by 0x16CB2B: io_ready (io.c:417)
==69243== by 0x16EE1E: io_loop (poll.c:453)
==69243== by 0x1154DA: main (gossipd.c:1089)
==69243==
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Gossipd now simply gets told by channeld when peers arrive or leave.
(it only needs to know for the seeker).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We also no longer strip the type off: everyone handles both forms, and
Eclair doesn't strip (and it's easier!).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Even if we're deferring putting them in the store and broadcasting them,
we tell lightningd so it will use it in any error messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want it to keep the latest, so it can make its own error msgs without
asking us. This installs (but does not use!) the message handler.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
An "err" is only returned if the channel_update is malformed: more common
is that it's fine, but we don't know the scid.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's weird to have connectd ask gossipd, when lightningd can just do it
and hand all the addresses together.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now let gossipd do it.
This also means there's nothing left in 'struct per_peer_state' to
send across the wire (the fds are sent separately), so that gets
removed from wire messages too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
local_chan was mainly around so we could "soft" disable channels (and
really disable them once we used the channel_update in an error
message).
Instead we introduce the idea of a "deferred_update": it's either
deferred indefinitely (a peer goes offline, if we need to send it in
an error we'll apply it immediatly), or simply delayed to avoid
spamming everyone.
The resulting rewrite is much clearer, IMHO.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Increasingly we want to know is it local, and get the direction: it's
more efficient to do both at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's very similar to the previous, but there are a few changes:
1. The enctlv fields are numbered differently.
2. The message itself is a different number.
The onionmsg_path type is the same, however, so we keep that constant
at least.
The result is a lot of cut & paste, but we will delete the old one
next release.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is from 6e99c5feaf60cb797507d181fe583224309318e9
We renamed the enctlv field to encrypted_recipient_data in the spec, and the
new onion_message is message 513. We don't handle it until the next patch.
Two renames:
1. blinding_seed -> blinding_point.
2. enctlv -> encrypted_recipient_data.
We don't do a compat cycle for our JSON APIs for these experimental
features only used by our own plugins, we just rename.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Temporarily disable sendpay_blinding test which uses obsolete onionmsg;
there's still some debate on the PR about how blinded HTLCs will work.
Changelog-EXPERIMENTAL: onionmessage: removed support for v0.10.1 onion messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We can have an update pending because it's too fast, but
refresh_local_channel is supposed to make sure we're up-to-date, so
force immediate application in that case.
Otherwise, we call update_local_channel at the bottom which frees the
pending update. This can mean that we miss a change in fees, for example.
Changelog-Fixed: errors: Errors returning a `channel_update` no longer return an outdated one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
To minimize the diffs, we #if 0 the code. We'll reenable it once
channeld is ready.
We also temporarily disable the ping tests.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds a new hook: onion_message_ourpath for when we know a message
came in via a blinded path we created. The onion_message_blinded hook
is now called for all other messages, since all messages are now
blinded.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
By popular merge-hell demand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Build: Python is now required to build, as generated files are no longer checked into the repository.
One change from the obsolete version handling, gossipd will no longer send
forwarding onion msgs to lightningd, but will forward it directly.
That was the effect before, anyway.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We never tested that we can correctly unwrap on the next step after
unblinding: it failed because we mangled the onion in place! Fix that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best-practice (to ensure prototypes match up), but there were a
few places we didn't (at least, directly). Make it a requirement,
either of form "foo.h" or <dir/foo.h>.
The noise is the change to our print templates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to use this to handle the simple description for channel_type.
It also needs to handle variable-size types (just like subtypes).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If there's a rate-card for liquidity, we don't know about it until
after startup (the plugin *should* call us at init to tell us what their
current rates are)
This mainly helps our CI under valgrind, which starts a fresh instance
and immediately calls the invoice command. This can cause the topology
plugin to try to access the gossmap file before it's created.
We can also move the gossmap reading in topology to init time.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This involves removing some fields from the now-misnamed routing.h
datastructures, and various internal messages.
One non-obvious change is to our "keepalive" logic which refreshes
channels every 13 days: instead of using the 'enabled' flag on the
last channel broadcast to decide whether to refresh it, we use the
local connected status directly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is better than using the previous "keep statting the file" approach,
since we can also tell you how long the replacement is, to avoid a
gratitous load.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're not defined to be, though we've not seen this on Linux (testing
showed that it is page-level atomic, which means it can still happen across
page boundaries though!). This was pointed out by whitslack in
https://github.com/ElementsProject/lightning/issues/4288
In practice, this just means not complaining when it happens, and also
not trying to get tricky to use it on MacOS (we can safely seek & write,
since we're single-threaded).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Removed bogus UNUSUAL log about gossip_store 'short test'.
If gossip_store is an incorrect version, we will recreate it: with an incorrect
version! This means we never get persistent gossip, *and* the pay plugin will
fail to map the gossip_store. Everyone will be sad.
Debugged-by: Matt Whitlock
Fixes: #4376Fixes: #4288
Typing-by: Rusty Russell <rusty@rustcorp.com.au>
You can now activate dual-funded channels using the
`--experimental-dual-fund` flag
Changelog-Changed: Config: `--experimental-dual-fund` runtime flag will enable dual-funded protocol on this node
We move over to the new "warning" paradigm, instead of using
an "rbf_fail" message.
Every failure is either a warning or an error; on warnings we
hang up and reconnect later, effectively resetting the state.
We assume if they set this to 0 (which nobody did previously), they're
using it as a modern flag and use it to indicate when they're
finished. Otherwise, we count how many blocks they've sent and use
that to determine whether they've finished.
See: https://github.com/lightningnetwork/lightning-rfc/pull/826
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: we use `sync_complete` for gossip range query replies, with detection for older spec nodes.
No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
This takes from the draft spec at https://github.com/lightningnetwork/lightning-rfc/pull/834
Note that if this draft does not get included, the peer will simply
ignore the warning message (we always close the connection afterwards
anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: we now report the new (draft) warning message.
We should actually be including this (as it may define _GNU_SOURCE
etc) before any system headers. But where we include <assert.h> we
often didn't, because check-includes would complain that the headers
included it too.
Weaken that check, and include config.h in C files before assert.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We fix up the test by using pay, instead of sendpay (and making pay log
the expected message).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: sendpay no longer extracts updates from errors, the caller should do it from the `raw_message`.
This overcomes the internal spam filter on updates, which can be useful
if we're actually trying to send through such a node.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Protocol: always accept channel_updates from errors, even they'd otherwise be rejected as spam.
Fixes: #4300
Don't include exp directly, use an ifdef in common/bolt12
(like we do for peer and onion wiregen files).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Note that this also changes so the feature is not represented in channels,
reflecting the recent drafts.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: `experimental-onion-messages` enables send, receive and relay of onion messages.
The previous onion_message code required a confirmed, not-shutting-down
channel, not just a connection. That's overkill; plus before widespread
adoption we will want to connect directly as a last resort.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is vital for calculating merkle trees; I previously used
towire+fromwire to get this!
Requires generation change so we can magic the ARRAY_SIZE var (the C
pre-processor can't uppercase things).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Avoids much cut & paste. Some tests don't need any of it, but most
want at least some of this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We tried to send an absurdly-long message, because our limit
was really large, as we were subtracting the tlv length, not
the tlv overhead.
In addition, we were treating the array as a tal object, which
it isn't if the offset is non-zero.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We used to create the entire reply, the if it was too big, split in
half and retry.
Now that the main network is larger, this always happens with a full
request, which is inefficient.
Instead, produce a reply assuming no compression, then compress as a
bonus. This is simpler and more efficient, at cost of sending more
packets.
I also renamed an internal dev var to make it clearer.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It's not (yet?) compulsory to have the timestamps, but handing them around
together makes sense (a missing timestamp has the same effect as a zero
timestamp).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec (since d4bafcb67dcf1e4de4d16224ea4de6b543ae73bf in March
2020) requires that reply_channel_range be in order (and all
implementations did this anyway).
But when I tried this, I found that LND doesn't (always) obey this,
since don't divide on block boundaries. So we have to loosen the
constraints here a little.
We got rid of the old LND compat handling though, since everyone should
now be upgraded (there are CVEs out for older LNDs).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Support for receiving full gossip from ancient LND nodes.
Instead of a boutique message, use a "real" channel_announcement for
private channels (with fake sigs and pubkeys). This makes it far
easier for gossmap to handle local channels.
Backwards compatible update, since we update old stores.
We also fix devtools/dump-gossipstore to know about the tombstone markers.
Since we increment our channel_announce count for local channels now,
the stats in the tests changed too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There's a few structs/wire calls that only exist under experimental features.
These were in a common file that was shared/used a bunch of places but
this causes problems. Here we move one of the problematic methods back
into `openingd`, as it's only used locally and then isolate the
references to the `witness_stack` in a new `common/psbt_internal` file.
This lets us remove the iff EXP_FEATURES inclusion switches in most of
the Makefiles.
1. Rename memleak_enter_allocations to memleak_find_allocations.
2. Unify scanning for pointers into memleak_remove_region / memleak_remove_pointer.
3. Document the functions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
dual funding needs the max-witness-len and utxo fields set for every
input. we should add them when we create a 'fundpsbt', so that every
psbt that c-lightning generates is dual-funding ready
There's a lot of it, and it means we can't `make check-source` on
these files.
Also bring bolt quotes up-to-date.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This avoids overwriting the ones in git, and generally makes things neater.
We have convenience headers wire/peer_wire.h and wire/onion_wire.h to
avoid most #ifdefs: simply include those.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We're going to make experimental versions of these completely separate files.
Also remove the dependency on the Makefile itself: it simply causes
unnecessary churn. We can always force-rebuild when we change a rule.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We create ALL_PROGRAMS, ALL_TEST_PROGRAMS, ALL_C_SOURCES and
ALL_C_HEADERS. Then the toplevel Makefile knows which are
autogenerated (by wildcard), so it can have all the rules to clean
them or check the source as necessary.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We are logging way too much from gossipd, causing noisy logs. This PR reduces
logs for incoming messages to those that actually caused a change in our
internal state (duplicate and old messages are just dropped silently now).
Changelog-Changed: gossipd: The `gossipd` is now a lot quieter, and will log only when a message changed our network topology.
Note that other directories were explicitly depending on the generated
file, instead of relying on their (already existing) dependency on
$(LIGHTNINGD_HSM_CLIENT_OBJS), so we remove that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
See https://github.com/lightningnetwork/lightning-rfc/pull/767
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Protocol: channels now pruned after two weeks unless both peers refresh it (see lightning-rfc#767)
It's not all that rare to do these operations, and requiring annotations
for it is a little painful.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There were no channel updates in my log; because sendonion doesn't know the
actual node_ids or channel_ids, we can't tell gossipd what node/channel it was
so it can no longer remove them on PERM errors.
However, we can tell it the error message so it can apply the update.
Fixes: #3877
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The main change here is that the previously-optional open/accept
fields and reestablish fields are now compulsory (everyone was
including them anyway). In fact, the open/accept is a TLV
because it was actually the same format.
For more details, see lightning-rfc/f068dd0d8dfa5ae75feedd99f269e23be4777381
Changelog-Removed: protocol: support for optioned form of reestablish messages now compulsory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since we now over-write the wally malloc/free functions, we need to do
so for tests as well. Here we pull up all of the common setup/teardown
logic into a separate place, and update the tests that use libwally to
use the new common_setup core
Changelog-None
This saves us keeping it in memory (so far, no channels have features), but
lets us optimize that case so we don't need to hit the disk for most of the
channels in listchannels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When we have only a single member in a TLV (e.g. an optional u64),
wrapping it in a struct is awkward. This changes it to directly
access those fields.
This is not only more elegant (60 fewer lines), it would also be
more cache friendly. That's right: cache hot singles!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will be used when we want to specify these in a route. But for now, they
only alter gossipd, which always sets them to NULL.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Use `LC_ALL=C sort` instead of `sort` so that mocks get sorted in
the same way on all developers' environments.
Re-record the result of `make update-mocks`.
Changelog-None
It's almost always "their_features" and "our_features" respectively, so
make those names clear.
Suggested-by: @cdecker
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is to prepare for dynamic features, including making plugins first
class citizens at setting them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
```
clang10 -DBINTOPKGLIBEXECDIR="\"../libexec/c-lightning\"" -Wall -Wundef -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wold-style-definition -Werror -std=gnu11 -g -fstack-protector -I ccan -I external/libwally-core/include/ -I external/libwally-core/src/secp256k1/include/ -I external/jsmn/ -I external/libbacktrace/ -I external/libbacktrace-build -I . -I/usr/local/include -DCCAN_TAKE_DEBUG=1 -DCCAN_TAL_DEBUG=1 -DCCAN_JSON_OUT_DEBUG=1 -DSHACHAIN_BITS=48 -DJSMN_PARENT_LINKS -DBUILD_ELEMENTS=1 -DBINTOPKGLIBEXECDIR="\"../libexec/c-lightning\"" -c -o gossipd/routing.o gossipd/routing.c
gossipd/routing.c:651:10: error: implicit conversion from 'unsigned long' to 'double' changes value
from 18446744073709551615 to 18446744073709551616 [-Werror,-Wimplicit-int-float-conversion]
if (r > UINT64_MAX)
~ ^~~~~~~~~~
```
It is ok to change the values because they are approximate anyway. Thus,
explicitly typecast to `double` to silence the warning without changing
behavior.
Changelog-None
Even without optimization, it's faster to walk all the channels than
ping another daemon and wait for the response.
Changelog-Changed: Forwarding messages is now much faster (less inter-daemon traffic)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The idea is that gossipd can give us the cupdate we need for an error, and
we wire things up so that we ask for it (async) just before we send the
error to the subdaemon.
I tried many other things, but they were all too high-risk.
1. We need to ask gossipd every time, since it produces these lazily
(in particular, it doesn't actually generate an offline update unless
the channel is used).
2. We can't do async calls in random places, since we'll end up with
an HTLC in limbo. What if another path tries to fail it at the same time?
3. This allows us to use a temporary_node_failure error, and upgrade it
when gossipd replies. This doesn't change any existing assumptions.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a common thing to do, so create a macro.
Unfortunately, it still needs the type arg, because the paramter may
be const, and the return cannot be, and C doesn't have a general
"(-const)" cast.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
common should not include specific per-daemon files. Turns out this
caused a lot of indirect includes to be exposed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Before this patch we used to send `double`s over the wire by just
copying them. This is not portable because the internal represenation
of a `double` is implementation specific.
Instead of this, multiply any floating-point numbers that come from
the outside (e.g. JSONs) by 1 million and round them to integers when
handling them.
* Introduce a new param_millionths() that expects a floating-point
number and returns it multipled by 1000000 as an integer.
* Replace param_double() and param_percent() with param_millionths()
* Previously the riskfactor would be allowed to be negative, which must
have been unintentional. This patch changes that to require a
non-negative number.
Changelog-None
I hadn't realized that lightningd asks gossipd every time we forward
a payment. But I'm going to abuse it here to get the latest channel_update,
otherwise (as lightningd takes over error message generation) lightningd
needs to do an async request at various painful points.
So have gossipd tell us the lastest update (stripped so compatible with
the strange in-onion-error format).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
This makes it clear we're dealing with a message which is a wrapped error
reply (needing unwrap_onionreply), not an already-wrapped one.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This lets us do more flexible filtering in the next patch. But it also
keeps some weird logic out of gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We've been sending them errors for invalid replies; instead, this works
around it.
Changelog-Added: Workaround LND's reply_channel_range issues instead of sending error.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is ignored in subdaemons which are per-peer, but very useful for
multi-peer daemons like connectd and gossipd.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
It really, really doesn't matter. But we were dramatically reducing
our view of the network:
In my gossip_store (mainnet):
channel_announcement: 30349
channel_update: 55119
node_announcment: 1783
Changelog-Fixed: No longer discard most node_announcements (fixes#3194)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The flat feature PR changes the rules so these are OK to propagate.
That makes sense: the unsupported features means there's something
unsupported about the *node* or *channel*, not the msg itself
(for that we'd use a different message type).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This prevents a gratuitous lookup of we get a late channel_announce,
but even better, it suppresses the "bad gossip" messages in case of
a late channel_update, which have plagued Travis (especially since we
got aggressive in pushing our own updates).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a better fix than doing it manually, which turned out
to do it in the wrong order (node_announcement followed by
channel_announcement) anyway.
Should fix many "Bad gossip" messages.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I was wondering why TAGS was missing some functions, and finally
tracked it down: PRINTF_FMT() confuses etags if it's at the start
of a function, and it ignores the rest of the file.
So we put PRINTF_FMT at the end, but that doesn't work for
*definitions*, only *declarations*. So we remove it from definitions
and add gratuitous declarations in the few static places.1
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Michael Schmoock
Rusty Russell
niftynei
Simon Vrouwe
Christian Decker
Antoine Poinsot
Matt Whitlock
Vasil Dimov
arowser