Once connectd is doing this, we can't close as soon as we send,
and in fact we can't do 'fail write' either.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. Adds the missing DNS error massages so they can be handled by
connect_control.
2. Prepends a 'All addresses failed' to code 401 message, so we
always have at least some error message to the user.
Changelog-None
And turn "" includes into full-path (which makes it easier to put
config.h first, and finds some cases check-includes.sh missed
previously).
config.h sets _GNU_SOURCE which really needs to be done before any
'#includes': we mainly got away with it with glibc, but other platforms
like Alpine may have stricter requirements.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We would fail connectd when listening on the IPv6 version failed; instead we should
allow that.
Changelog-Experimental: experimental-websocket-port fixed to work with default addresses.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
valgrind locally complains about the allocations in autodata leaking:
```
==138200== 16 bytes in 1 blocks are still reachable in loss record 1 of 2
==138200== at 0x483B7F3: malloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==138200== by 0x10D41A: autodata_register_ (autodata.c:20)
==138200== by 0x10E7B8: register_autotype_type_to_string (type_to_string.h:79)
==138200== by 0x10F5CA: register_one_type_to_string0 (block.c:259)
==138200== by 0x19734C: __libc_csu_init (in /home/rusty/devel/cvs/lightning/common/test/run-route-specific)
==138200== by 0x4A3D03F: (below main) (libc-start.c:264)
==138200==
==138200== 176 bytes in 1 blocks are still reachable in loss record 2 of 2
==138200== at 0x483DFAF: realloc (in /usr/lib/x86_64-linux-gnu/valgrind/vgpreload_memcheck-amd64-linux.so)
==138200== by 0x10D472: autodata_register_ (autodata.c:26)
==138200== by 0x122D37: register_autotype_type_to_string (type_to_string.h:79)
==138200== by 0x122F1F: register_one_type_to_string0 (node_id.c:50)
==138200== by 0x19734C: __libc_csu_init (in /home/rusty/devel/cvs/lightning/common/test/run-route-specific)
==138200== by 0x4A3D03F: (below main) (libc-start.c:264)
==138200==
make: *** [Makefile:638: unittest/common/test/run-route-specific] Error 7
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
blob[] is really a string from the commandline; leave it as a char.
And parsing is much simpler than this code makes it seem!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
October was the date Torv2 is no longer supported by the Tor Project;
it will probably not work at all by next release, so we should remove
it now even though it's not quite the 6 months we prefer for
deprecation cycles.
I still see 110 nodes advertizing Torv2 (vs 10,292 Torv3); we still
parse and display it, we just don't advertize or connect to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
WebSocket is a bit weird:
1. It starts like an HTTP connection, but they send special headers.
2. We reply with special headers, one of which involves SHA1 of one of theirs.
3. We are then in WebSocket mode, where each frame starts with a 2-20 byte
header.
We relay data in a simplistic way: if either side sends something, we
read it and relay it synchronously. That avoids any gratuitous
buffering.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
If the port is set, we spawn it (lightning_websocketd) on any
connection to that port. That means websocketd is a per-peer daemon,
but it means every other daemon uses the connection normally (it's
just actually talking to websocketd instead of the client directly).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
By popular merge-hell demand.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Build: Python is now required to build, as generated files are no longer checked into the repository.
Before:
Ten builds, laptop -j5, no ccache:
```
real 0m36.686000-38.956000(38.608+/-0.65)s
user 2m32.864000-42.253000(40.7545+/-2.7)s
sys 0m16.618000-18.316000(17.8531+/-0.48)s
```
Ten builds, laptop -j5, ccache (warm):
```
real 0m8.212000-8.577000(8.39989+/-0.13)s
user 0m12.731000-13.212000(12.9751+/-0.17)s
sys 0m3.697000-3.902000(3.83722+/-0.064)s
```
After:
Ten builds, laptop -j5, no ccache: 8% faster
```
real 0m33.802000-35.773000(35.468+/-0.54)s
user 2m19.073000-27.754000(26.2542+/-2.3)s
sys 0m15.784000-17.173000(16.7165+/-0.37)s
```
Ten builds, laptop -j5, ccache (warm): 1% faster
```
real 0m8.200000-8.485000(8.30138+/-0.097)s
user 0m12.485000-13.100000(12.7344+/-0.19)s
sys 0m3.702000-3.889000(3.78787+/-0.056)s
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is best-practice (to ensure prototypes match up), but there were a
few places we didn't (at least, directly). Make it a requirement,
either of form "foo.h" or <dir/foo.h>.
The noise is the change to our print templates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We make it a first-class citizen internally, even though we won't use
it over the wire (at least, non-experimental builds). This scheme
follows the latest draft, in which features are flagged compulsory.
We also add several helper functions.
Since uses the *even* bits (as per latest spec), not the *odd* bits,
we have some other fixups.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We want to use this to handle the simple description for channel_type.
It also needs to handle variable-size types (just like subtypes).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This renames all occurences of use_proxy_always to always_use_proxy
to keep it inline with config values. This was a bit confusing.
Only significant change is that the payload in the plugins init
requests also contained the old name. No plugin currently seems to make
use of this variable yet. The old name 'use_proxy_always' is added when
deprecated APIs is enabled.
Changelog-Deprecated: Plugins: Renames plugin init 'use_proxy_always' to 'always_use_proxy'
This does two things:
- It moves non-tor addresses upfront so it prefers normal connection
which are less laggy and more reliable.
- It prevents connectd from trying the same wire_addr twice when the
addr_hint was given and gossip also added the same address.
Changelog-Changed: connectd: try non-TOR connections first
Changelog-Fixed: connectd: do not try address hint twice
In fact, we make it compulsory, which means if you don't understand it
you'll hang up on us!
Add some logging for that in future.
Changelog-Changed: Protocol: All new invoices require a payment_secret (i.e. modern TLV format onion)
Changelog-Changed: Protocol: We can no longer connect to peers which don't support `payment_secret`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows us to ensure a packet is read by the other end, but we
don't read anything else from them or write anything to them.
Using '+' is similar, but because it closes the connection, the peer
might notice before receiving the packet (such as if it does a write).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We were accidentally using the port that the tor service was
connecting to, not the /torport the user said to use.
Fixes: #4597
Reported-by: @openoms
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: Config: `addr` autotor and statictor /torport arguments now advertized correctly.
I did this by copying the updated bech32 code, and then re-patching in
our minor changes:
1. Headers modded (we need size_t)
2. Explicit length for bech32_encode/decode (not 90).
3. Exposing and bech32_ prefix for convert_bits, charset, charset_rev.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Currently we abuse openingd and dualopend to do this, but connectd already
has the ability to talk to peers, so it's more efficient.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This matters: if we connected, the address is probably usable for future connections.
But if they connected, the port is probably not (but the IP address may be).
Changelog-Added: JSON-RPC: `connect` returns "direction" ("in": they iniatated, or "out": we initiated)
Changelog-Added: plugins: `peer_connected` hook and `connect` notifications have "direction" field.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
No more sending "all-channel" errors; in particular, gossipd now only
sends warnings (which make us hang up), not errors, and peer_connected
rejections are warnings (and disconnect), not errors.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Plugins: `peer_connected` rejections now send a warning, not an error, to the peer.
We should actually be including this (as it may define _GNU_SOURCE
etc) before any system headers. But where we include <assert.h> we
often didn't, because check-includes would complain that the headers
included it too.
Weaken that check, and include config.h in C files before assert.h.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Simon Vrouwe
Michael Schmoock
W. J. van der Laan
niftynei
Christian Decker
Jan Sarenik