Commit Graph

4550 Commits

Author SHA1 Message Date
Mark Beckwith 1fb203891d param: upgraded json_tok_short_channel_id
Made previous version a utility function.

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith 9b28ecf8fc param: upgraded json_tok_pubkey
Also add json_to_pubkey as utility function.

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith 6254d15efd param: upgraded json_tok_sha256
Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith 2a0c2601c0 param: upgraded json_tok_newaddr
Made it a local static since its a one-off.

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith 947752b9cc param: upgraded json_tok_percent
Made it a local static since its only used once.

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith 47555efc0d param: rebased master
Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith 8ebc95b7b0 param: upgraded json_tok_bool
Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith e5918f4e5a param: upgraded json_tok_double
Also renamed old version to json_to_double for use as a utility funciton.

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith bab8ff991a param: upgraded json_tok_u64
Also renamed old version to json_to_u64 for use as a utility funciton.

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
Mark Beckwith 294dc06de9 param: upgraded json_tok_number
Also renamed old version to json_to_number for use as a utility function.

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-20 01:02:25 +00:00
conanoc 80a875a9a5 Update HACKING.md
Added some info in debugging section.

[ Squashed: Guide to use configure. --RR ]
2018-08-18 23:37:43 +00:00
mikhaelsantos 43f31c52bf fix: issue:1848 - Docker Image is not building:
* Update public signing key location
2018-08-16 00:15:07 +00:00
Rusty Russell b379bec4e4 pytest: fix flakiness in test_channel_reenable.
In one case, the channel_update which we expected to activate the channel
from l2 was suppressed as redundant.  This is certainly valid, so just
check the results.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-16 00:14:08 +00:00
Fabian Raetz 700a0d702d replace use of non standard mv -n flag
The -n flag is a non-standard flag and should not be used in scripts.
See https://man.openbsd.org/FreeBSD-11.1/mv#COMPATIBILITY.
2018-08-15 06:50:29 +00:00
Rusty Russell 3454ca57a2 pytest: remove DEVELOPER guard for test_ping
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-15 06:48:55 +00:00
conanoc b1900b18ab Fix DEVELOPER guard for ping
ping_req() should be outside of DEVELOPER guard now.
2018-08-15 06:48:55 +00:00
Simon Vrouwe 795e0e1b21 do not start fee estimation loop with option: --dev-override-fee-rates 2018-08-14 06:52:57 +00:00
Simon Vrouwe d309a7d1b9 in ./lightningd --help, tell for which network the default values
are shown
2018-08-14 00:07:10 +00:00
Douglas Schilling Landgraf 0a5dc713f0 contrib: add init file for systemd
Similar to init/bitcoind.service, this patch
includes an initial lightningd.service.

[ Squashed "trivial, fix comment" -- RR ]
2018-08-13 23:55:12 +00:00
Mark Beckwith 8f17191099 param: upgraded json_tok_tok to advanced callback
This was a very simple change and allowed us to remove the special
`json_opt_tok` macro.

Moved the callback out of `common/json.c` to `lightningd/json.c` because the new
callbacks are dependent on `struct command` etc.
(I already started on `json_tok_number`)

My plan is to:
	1. upgrade json_tok_X one a time, maybe a PR for each one.
	2. When done, rename macros (i.e, remove "_tal").
	3. Remove all vestiges of the old callbacks
	4. Add new callbacks so that we no longer need json_tok_tok!
	   (e.g., json_tok_label, json_tok_str, json_tok_msat)

Signed-off-by: Mark Beckwith <wythe@intrig.com>
2018-08-13 23:46:35 +00:00
Christian Decker a97955845f pytest: dev-ping was renamed to ping 2018-08-10 16:15:12 +02:00
Rusty Russell 35d7449259 connectd: initialize peer->conn.
It's only used in one place, but that's enough.

Fixes: #1434
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 16:15:12 +02:00
Rusty Russell f8aed1b4b0 pytest: add reconnection stress test.
It sometimes triggers a crash like #1434 (though never under valgrind).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 16:15:12 +02:00
Rusty Russell fefb7faba7 pytest: try a simple reconnection test.
This passes, but that's OK.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 16:15:12 +02:00
Cryptcoin Junkey 16190805cc Use port 80 instead of 11371 for accessing the keyserver.
Some firewalls may block port 11371.
2018-08-10 15:45:15 +02:00
Rusty Russell 9d8b3a070b pytest: make test_htlc_send_timeout more reliable.
Waiting for three node_announcments isn't always enough, since l2 can
publish two of them (an independent bug).  Do the more Right Thing and
just wait for 30 seconds of no input...

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 65c882ca3a Minor cleanups.
1. connect convenience variable for improved readabilty.
2. a comment explaining that timer is on channel, not HTLC.
3. use modern python style in test_htlc_send_timeout

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 63e4ea17af channeld: don't commit until we've seen recent incoming msg, ping if required.
Now sending a ping makes sense: it should force the other end to send
a reply, unblocking the commitment process.

Note that rather than waiting for a reply, we're actually spinning on
a 100ms loop in this case.  But it's simple and it works.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 93e445daf5 channeld: send our own pings whenever we indicate we want to send a commitment.
This doesn't do much (though we might get an error before we send the
commitment_signed), but it's infrastructure for the next patch.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 223cd97c94 lightningd: kill channeld if we added an HTLC and it didn't commit in 30 seconds.
This effectively constrains how long we'll delay an outgoing HTLC.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell ebd229fb37 pytest: add test for HTLC timeout when a node is unreachable (xfail).
Currently, if we don't realize a TCP connection is down, we almost
certainly don't find out until *after* we're sent the
commitment_signed message, in which case we cannot fail the incoming
HTLC.

This test demonstrates that.  Note the 30 second sleep: we should really
run Travis tests in parallel!

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 86a46cb1d4 channeld: push TCP output on commitment and revocation messages.
These are the really time-critical ones.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell db22d2366e crypto_sync: sync_crypto_write_no_delay to flush TCP after critical packets.
Avoid that 200ms loss.  We don't want to disable nagle generally,
since it's great for gossip and other traffic; we just want to push at
critical times.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 71575b2115 ping: no longer a dev_ command.
Fixes: #1407
Suggested-by: conanoc@gmail.com
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell be7a27a765 connect: randomize backoff a little.
Since we now fixed the bug where nodes receiving a connection would
try to reconnect to the source IP/port of that connection, we now expose
an issue mentioned by other implementers: we can continually cross over
reconnections unless we add some fuzz.  One second should be sufficient.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 4f1186c4b1 connectd: iterate through all known addresses for a peer, not just one.
If we have an address hint, we start with that, but we'll use
node_announcement information if required.

Note: we (ab)use the address hint when restoring from the database
or reconnecting, even if the connection was *incoming*.  That meant
that the recipient of a connection would *never* manage to connect out.

We still don't take multiple addresses from the DNS seeds: I assume we
should, since there could be IPv4 and IPv6.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 74568a1c50 lightningd: peer_start_channeld always returns true; make it void.
It is always true, and we always ignore it.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:46:45 +02:00
Rusty Russell 7c856470e2 wallet: add buildtime and runtime assertions on db enums.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:44:28 +02:00
Rusty Russell 1dde233a48 wallet: put explicit hook in for fatal error testing.
We're currently overriding fatal() with something that actually
returns, which contrasts with its declaration as NORETURN.

This breaks in the next patch which wants a real fatal() in wallet.h.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-10 12:44:28 +02:00
Rene Pickhardt 8b902729b9 added a test case so that the enum wallet_payment_status which is critical for the communitcation with the data store will not accidentely being changed by some developer
[ Folded "cleaned up the test code" -- RR ]
[ Fixed prototype -- RR ]
2018-08-10 12:44:28 +02:00
Mark Beckwith bd5bf1f168 Enhanced param parsing
[ Squashed into single commit --RR ]

This adds two new macros, `p_req_tal()` and `p_opt_tal()`. These support
callbacks that take a `struct command *` context.  Example:

	static bool json_tok_label_x(struct command *cmd,
                                      const char *name,
				      const char *buffer,
				      const jsmntok_t *tok,
				      struct json_escaped **label)

The above is taken from the run-param unit test (near the bottom of the diff).
The return value is true on success, or false (and it calls command_fail itself).

We can pretty much remove all remaining usage of `json_tok_tok` in the codebase
with this type of callback.
2018-08-10 02:15:30 +00:00
Christian Decker d124f22421 travis: Actually build with clang if we want to 2018-08-10 01:31:24 +00:00
Rusty Russell 51c65ebc42 CHANGELOG: add openingd change.
So much code for so little noticable difference, but mention that
`state` (an accidental legacy from before we moved the field into
`channels` long ago) no longer exists.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00
Rusty Russell b4e6a0fcad peer_failed: write error message to peer directly.
We currently hand the error back to the master, who then stores it for
future connections and hands it back to another openingd to send and exit.

Just send directly; it's more reliable and simpler.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00
Rusty Russell d8d4b19f3a connectd: remove separate address hint message.
Include it as an optional field in the connect_to_peer message (it was
added before we had optional fields).

The only issue is that reconnects want it too, so again connectd hands
it back to master in connectctl_connect_failed.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00
Rusty Russell 8939a5001b connectd: rely on the master to tell us to reconnect.
connectd tells master about every disconnection, and master knows
whether it's important to reconnect.  Just get the master to invoke a new
connect command if it considers the peer important!

The only twist is timeouts: we don't want to immediately reconnect if
we've failed to connect.  To solve this, connectd passes a 'delaytime'
to the master when a connection fails, and the master passes it back
when it asks for a connection.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00
Rusty Russell 30f08cc2b0 connectd: always tell master when connection fails/succeeded.
We used to separate implicit connection requests (ie. timed retries
for important peers) and explicit ones, and send a
WIRE_CONNECTCTL_CONNECT_TO_PEER_RESULT for the latter.

In the success case, that's now redundant, since we hand the connected
peer to the master using WIRE_CONNECT_PEER_CONNECTED; we just need a
message for the failure case.  And we might as well tell the master
every failure, so we don't have to distinguish internally.

This also solves a race we had before: connectd would send
WIRE_CONNECTCTL_CONNECT_TO_PEER_RESULT which completes the incoming
JSON connect command, then send WIRE_CONNECT_PEER_CONNECTED.  So
there's a window where the JSON command can return, but the peer isn't
known to lightningd yet.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00
Rusty Russell 684d60dbda lightningd: don't call connectd if we already know about peer.
The semantic here are that we 'succeed' if we're already connected.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00
Rusty Russell 8b5c80f42a opening_control.c: make sure we always clean up in error cases.
Especially by closing the file descriptors we were handed!

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00
Rusty Russell 035362e151 openingd: don't exit when we receive an error.
In particular, all opening_read_peer_msg() callers need to know there
was an error (presumably, negotiating) so they can stop, but we should
not exit.

This lets us reenable the final disabled test.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2018-08-09 19:44:27 +02:00