This alters the billboard, but that's a human-readable thing so not
noted in CHANGELOG.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `listpeers` `status` now refers to "channel ready" rather than "funding locked" (BOLT language change for zeroconf channels)
Changelog-Added: JSON-RPC: `channel_opened` notification `channel_ready` flag.
Changelog-Deprecated: JSON-RPC: `channel_opened` notification `funding_locked` flag (use `channel_ready`: BOLTs namechange).
If there's only a single underscore, lowdown ignores it, but if there are multiple
(see min_final_cltv_expiry) it decides we're trying to highlight part of the word.
Reported-by: @wtogami
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. If the tool changes, you need to regenerate since the output may
change.
2. This didn't just filter that out, ignored all but the first
dependency, which made bisecting the bookkeeper plugin a nightmare:
it didn't regenerate the .po file, causing random crashes.
If we want this, try $(filter-out tools/fromschema.py) instead. But I
don't think we want that.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
You can't start a list without a paragraph separator.
```diff
--- /tmp/before 2022-07-20 22:02:23.485372596 +0930
+++ /tmp/after 2022-07-20 22:02:33.745528456 +0930
@@ -21,12 +21,16 @@
On startup of the daemon, no autoclean is set up.
RETURN VALUE
- On success, an object is returned, containing: - enabled (boolean):
- whether invoice autocleaning is active
+ On success, an object is returned, containing:
- If enabled is true: - expired_by (u64): how long an invoice must be ex‐
- pired (seconds) before we delete it - cycle_seconds (u64): how long an
- invoice must be expired (seconds) before we delete it
+ • enabled (boolean): whether invoice autocleaning is active
+
+ If enabled is true:
+
+ • expired_by (u64): how long an invoice must be expired (seconds) be‐
+ fore we delete it
+ • cycle_seconds (u64): how long an invoice must be expired (seconds)
+ before we delete it
AUTHOR
ZmnSCPxj <ZmnSCPxj@protonmail.com> is mainly responsible.
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are no definition lists in Markdown, and lists get mangled if
they follow immediately: they need a line between them.
So use bullets for options, and use an indent so the text gets in the
line below.
Here's a before-and-after example:
```diff
--- /tmp/after 2022-07-20 21:55:54.355487769 +0930
+++ /tmp/after2 2022-07-20 21:58:17.305642576 +0930
@@ -10,38 +10,71 @@
lightning-cli sends commands to the lightning daemon.
OPTIONS
- --lightning-dir=DIR Set the directory for the lightning daemon we're talking to; defaults to $HOME/.lightning.
+ • --lightning-dir=DIR
- --conf=PATH Sets configuration file (default: lightning-dir/config ).
+ Set the directory for the lightning daemon we're talking to; defaults to $HOME/.lightning.
- --network=network --mainnet --testnet --signet Sets network explicitly.
+ • --conf=PATH
- --rpc-file=FILE Named pipe to use to talk to lightning daemon: default is lightning-rpc in the lightning directory.
+ Sets configuration file (default: lightning-dir/config ).
- --keywords/-k Use format key=value for parameters in any order
+ • --network=network
- --order/-o Follow strictly the order of parameters for the command
+ • --mainnet
- --json/-J Return result in JSON format (default unless help command, or result contains a format-hint field).
+ • --testnet
- --raw/-R Return raw JSON directly as lightningd replies; this can be faster for large requests.
+ • --signet
- --human-readable/-H Return result in human-readable output.
+ Sets network explicitly.
- --flat/-F Return JSON result in flattened one-per-line output, e.g. { "help": [ { "command": "check" } ] } would become
+ • --rpc-file=FILE
+
+ Named pipe to use to talk to lightning daemon: default is lightning-rpc in the lightning directory.
+
+ • --keywords/-k
+
+ Use format key=value for parameters in any order
+
+ • --order/-o
+
+ Follow strictly the order of parameters for the command
+
+ • --json/-J
+
+ Return result in JSON format (default unless help command, or result contains a format-hint field).
+
+ • --raw/-R
+
+ Return raw JSON directly as lightningd replies; this can be faster for large requests.
+
+ • --human-readable/-H
+
+ Return result in human-readable output.
+
+ • --flat/-F
+
+ Return JSON result in flattened one-per-line output, e.g. { "help": [ { "command": "check" } ] } would become
help[0].command=check. This is useful for simple scripts which want to find a specific output field without parsing
JSON.
- --notifications/-N=LEVEL If LEVEL is 'none', then never print out notifications. Otherwise, print out notifications of
- LEVEL or above (one of io, debug, info (the default), unusual or broken: they are prefixed with # .
+ • --notifications/-N=LEVEL
+
+ If LEVEL is 'none', then never print out notifications. Otherwise, print out notifications of LEVEL or above (one of
+ io, debug, info (the default), unusual or broken: they are prefixed with # .
+
+ • --help/-h
+
+ Pretty-print summary of options to standard output and exit. The format can be changed using -F, -R, -J, -H etc.
+
+ • --version/-V
- --help/-h Pretty-print summary of options to standard output and exit. The format can be changed using -F, -R, -J, -H
- etc.
+ Print version number to standard output and exit.
- --version/-V Print version number to standard output and exit.
+ • allow-deprecated-apis=BOOL
- allow-deprecated-apis=BOOL Enable deprecated options. It defaults to true, but you should set it to false when testing to
- ensure that an upgrade won't break your configuration.
+ Enable deprecated options. It defaults to true, but you should set it to false when testing to ensure that an upgrade
+ won't break your configuration.
COMMANDS
lightning-cli simply uses the JSON RPC interface to talk to lightningd, and prints the results. Thus the commands avail‐
@@ -60,13 +93,13 @@
this is not encouraged.
EXAMPLES
- 1. List commands
+ 1. List commands:
- lightning-cli help
+ • lightning-cli help
- 2. Fund a 10k sat channel using uncomfirmed outputs
+ 2. Fund a 10k sat channel using uncomfirmed outputs:
- lightning-cli --keywords fundchannel id=028f...ae7d amount=10000sat minconf=0
+ • lightning-cli --keywords fundchannel id=028f...ae7d amount=10000sat minconf=0
BUGS
This manpage documents how it should work, not how it does work. The pretty printing of results isn't pretty.
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Here's the before-vs-after comparison (ignoring whitespace changes):
```diff
--- /tmp/before 2022-07-20 21:52:44.336641810 +0930
+++ /tmp/after 2022-07-20 21:55:54.355487769 +0930
@@ -1,7 +1,7 @@
-LIGHTNING-CLI(1) lightning-cli LIGHTNING-CLI(1)
+LIGHTNING-CLI(1) LIGHTNING-CLI(1)
NAME
- lightning-cli - Control lightning daemon
+ lightning-cli -- Control lightning daemon
SYNOPSIS
lightning-cli [OPTIONS] command
@@ -14,10 +14,7 @@
--conf=PATH Sets configuration file (default: lightning-dir/config ).
- --network=network
- --mainnet
- --testnet
- --signet Sets network explicitly.
+ --network=network --mainnet --testnet --signet Sets network explicitly.
--rpc-file=FILE Named pipe to use to talk to lightning daemon: default is lightning-rpc in the lightning directory.
@@ -43,8 +40,8 @@
--version/-V Print version number to standard output and exit.
- allow-deprecated-apis=BOOL Enable deprecated options. It defaults to true, but you should set it to false when testing
- to ensure that an upgrade won't break your configuration.
+ allow-deprecated-apis=BOOL Enable deprecated options. It defaults to true, but you should set it to false when testing to
+ ensure that an upgrade won't break your configuration.
COMMANDS
lightning-cli simply uses the JSON RPC interface to talk to lightningd, and prints the results. Thus the commands avail‐
@@ -67,7 +64,7 @@
lightning-cli help
- 1. Fund a 10k sat channel using uncomfirmed outputs
+ 2. Fund a 10k sat channel using uncomfirmed outputs
lightning-cli --keywords fundchannel id=028f...ae7d amount=10000sat minconf=0
@@ -84,4 +81,4 @@
Note: the modules in the ccan/ directory have their own licenses, but the rest of the code is covered by the BSD-style
MIT license.
- LIGHTNING-CLI(1)
+Core Lightning v0.11.0.1-350-gac2e137 LIGHTNING-CLI(1)
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5437
The new parameter name (this version) is amount_msat: msatoshi is
deprecated. The doc/schemas/invoice.request.json has this correct
(but we don't generate teh *usage* line from that yet!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We *should* remember the channel type, since this is only required
if they set the channel_type to include option_scid_alias.
However, since we support channel upgrade, channel_type really needs
a new table. I have a patch for that, from my abandoned original
"fastopen" branch for aliases, but it's too big a chance for rc2 IMHO.
Meanwhile, we allow exposeprivatechannels's scids to be either real or
the aliases.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: invoice routehints will use fake short-channel-ids for private channels if channel opened with option_scid_alias-supporting peer.
Track rebalances, and report income events for them.
Previously `listincome` would report:
- invoice event, debit, outgoing channel
- invoice_fee event, debit, outgoing channel
- invoice event, credit, inbound channel
Now reports:
- rebalance_fee, debit, outgoing channel
(same value as invoice_fee above)
Note: only applies on channel events; if a rebalance falls to chain
we'll use the older style of accounting.
Changelog-None
First, how we record "our_funds" and then apply pushes vs lease_fees
(for liquidity ad buys/sales) was exactly opposite.
For pushes we were reporting the total funded into the channel, with the
push representing how much we'd later moved to the peer.
For lease_fees we were rerporting the total in the channel, with the
push representing how much was already moved to the peer.
We fix this (from a view perspective) by re-adding lease fees to what's
reported in the channel funding totals. Since this is now new behavior
(for leased channel values), we added new fields so we can take the old
field names thru a deprecation cycle.
We also make it possible to differentiate btw a push and a lease_fee
(before they were all the same), by adding to new fields to `listpeers`:
`fee_paid_msat` and `fee_rcvd_msat`.
This allows us to avoid math in the bookkeeper, instead we just pick
the numbers out directly and record them.
Fixes#5472
Changelog-Added: JSON-RPC: `listpeers` now has a few new fields for `funding` (`remote_funds_msat`, `local_funds_msat`, `fee_paid_msat`, `fee_rcvd_msat`).
Changelog-Deprecated: JSON-RPC: `listpeers`.`funded` fields `local_msat` and `remote_msat` are now deprecated.
`lightningd` has an option --wallet that lets you supply a database dsn
string to connect to a sqlite3/postgres database that's hosted/stored
elsewhere.
This adds the `--bookkeeper-db` option which does the same, except for
the bookkeeping data for a node!
Note that the default is to go in the `lightning-dir` in a database
called `accounts.sqlite3`
Adds schema definitions and manpages for bkpr- commands; also renames
the commands to all start with 'bkpr-', so they're easier to identify/
make runes about.
If rune contains invalid UTF-8, offers (which implements decode) would
produce JSON with invalid UTF-8, which causes lightningd to complain
and kill it, and then die because it's an important plugin.
So don't decode invalid UTF-8!
Reported-by: @jb55
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This gives a nice way to ensure your secret is the correct one.
Also, we don't need to suppress VALGRIND for this test, now the output
races are fixed.
Changelog-Added: `hsmtool`: new command `checkhsm` to check BIP39 passphrase against hsm_secret.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Most unexpected ones are still 1, but there are a few recognizable error codes
worth documenting.
Rename the HSM ones to put ERRCODE_ at the front, since we have non-HSM ones
too now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Returning an warning message when the pub key is not specified and there is no node in the graph.
We try to help people that use core lightning as a signer and nothings else.
Changelog-Deprecated: rpc: checkmessage return an error when the pubkey is not specified and it is unknown in the network graph.
First, connectd tells us the peer has connected, and we call the connected hook,
and if it says it's fine, we are actually connected and we fire off notifications.
Of course, we could be disconnected while in the connected hook, and that would
mean we tell people about a connection which is no longer current.
Make this clear with a tristate: if we're not marked disconnected by
the time the hooks finish, we're good. It also gives us a cleaner
"connect" command return when we connected but disconnected before
processing.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a bit weird since it lives in the offers plugin, but it works
well. This should make runes much more approachable for people!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I'm assuming that nobody wants a rate slower than 1 per minute; we can
introduce 'drate' if we want a per-day kind of limit.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This was introduced to allow creating a shared secret, but it's better to use
makesecret which creates unique secrets. getsharedsecret being a generic ECDH
function allows the caller to initiate conversations as if it was us; this
is generally OK, since we don't allow untrusted API access, but the commando
plugin had to blacklist this for read-only runes explicitly.
Since @ZmnSCPxj never ended up using this after introducing it, simply
remove it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: JSONRPC: `getsharedsecret` API: use `makesecret`
There's one case where we can present more infomation, so do that, and
fix documentation.
Changelog-Added: JSON-RPC: `listforwards` now shows `out_channel` in more cases: even if it couldn't actually send to it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5329
It actually only sets the prefix for the lightningd core log messages;
the other logs have their own prefix.
Make it a real, process-wide prefix which actually goes in front of the timestamp.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: options: `log-prefix` now correctly prefixes *all* log messages.
That's useful for "tell me everything about this node" debugging.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5348
Changelog-Added: lightningd: `log-level=debug:<partial-nodeid>` supported to get debug-level logs for everything about a peer.
This will eventually enable us to specify 0 for zeroconf channels.
Changelog-Added: JSON-RPC: Added `mindepth` argument to specify the number of confirmations we require for `fundchannel` and `multifundchannel`
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
The message was
[warn] CookieAuthFileGroupReadable is set, but will have no effect: you must specify an explicit CookieAuthFile to have it group-readable.
Changelog-None
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
This prepares for when they start being u64, not strings with msat appended.
This has a strange side effect on our schema: despite the name,
decodepay's `fee_base_msat` is actually a u64, which we now convert to
msat on decode.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The name in the spec is `msat`, but I don't want to make an API exception.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `fetchinvoice` `changes` `amount_msat`
Changelog-Deprecated: JSON-RPC: `fetchinvoice` `changes` `msat` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Changelog-Added: Plugins: `htlc_accepted` now exposes the `short_channel_id` for the channel from which that HTLC is coming from and the low-level per-channel HTLC `id`, which are necessary for bridging two different Lightning Networks when MPP is involved.
When starting a plugin, if the plugin path cannot be found in
absolute context, assume it is a relative path to the default
plugins dir. As a result, the following now works when my_plugin.py
is installed in the default plugins dir:
lightning-cli plugin start my_plugin.py
Also update the plugin documentation to reflect that the use of a
relative path is now available.
Changelog-Added: plugin start RPC subcommand now assumes relative path to default plugins dir if the path is not found in absolute context. i.e. lightning-cli plugin start my_plugin.py
[ Squashed two commits into one -- RR ]
Switching to poetry, and deprecating python 3.6, made things a bit
more tricky. Sadly we'll not be able to build jammy, as its support is
missing in the tag tarball, but it'll be there for the next release.
When building reproducible build for Bionic:
```
Traceback (most recent call last):
File "/usr/local/bin/mrkd", line 8, in <module>
sys.exit(main())
File "/usr/local/lib/python3.6/dist-packages/mrkd/__init__.py", line 261, in main
result = mistune.markdown(fp.read(), inline=inline, renderer=renderer)
File "/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 1856: ordinal not in range(128)
doc/Makefile:120: recipe for target 'doc/lightning-getinfo.7' failed
make: *** [doc/lightning-getinfo.7] Error 1
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The relative path makes for a difficult experience when people are reading on `https://lightning.readthedocs.io/`. Directly linking saves the reader a few clicks hunting down the correct location :)
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
changed `make` to `poetry run make`.
Also moved the spot where `poetry install` is run as it wouldn't make sense to run it before the project is cloned.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has `description` parameter, will be required if bolt11 only has a hash.
Changelog-Deprecated: JSON-RPC: `pay` for a bolt11 which uses a `description_hash`, without setting `description`.
This is what LND does, and it's better for upper layers than trying to
twist our maxfeepercent / exemptfee heuristics to suit.
(I don't remember who complained about this, sorry!)
I'm doing this now because I want to add YA parameter next!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `pay` has new parameter `maxfee` for setting absolute fee (instead of using `maxfeepercent` and/or `exemptfee`)
Types are fixed, in particular:
* rename "OutputDesc" to more consistent "outputdesc".
* rename "utxo" to more consistent "outpoint".
* it's "boolean" not "bool".
* "number" means int or float, usually it should be u32.
Specific commands:
* close `id` can be by channel id, scid.
* close `feerange` is a feerate type.
* datastore/deldatastore/listdatastore `key` can be singleton.
* delexpiredinvoice: `maxexpirytime` is not required, is a u64.
* invoice/delinvoice/listinvoice `label` can be an integer
* fundpsbt: many fields are u32 not number (JSON for int or float).
* invoice: `msatoshi` can be "any".
* invoice: `expiry` has a type (now must be numeric).
* invoice: `exposeprivatechannels` can be bool or array of scids.
* invoice: `deschashonly` added
* keysend: there's no "float" type, use "number" or "u32" etc.
* keysend: `routehints` is a valid arg, as is `extratlvs` (EXPERIMENTAL_FEATURES)
* listdatastore: `key` is not required.
* newaddr: `addresstype` can be "all"
* pay: `exemptfee` is "msat", new fields `locaofferid` and `exclude`
* sendonion: was mis-formatted, missed `localofferid` and `groupid` fields.
* sendpay: add `localofferid` and `groupid` params.
* signpsbt: add `signonly` param.
* txprepare "outptus" typo.
* waitsendpay: add `groupid` and fix `partid` type.
* withdraw: `destination` is a bitcoin address, not a pubkey.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Makes types harder, and I've never personally used them.
Changelog-Deprecated: JSON-RPC: `invoice` `expiry` no longer allowed to be a string with suffix, use an integer number of seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Make it always a number; this makes the JSON request specification
simpler. We allowed a number since v0.10.1.
(reserve=True is the default anyway, so usually it can be omitted:
reserve=False becomes reserve=0).
Changelog-Deprecated: JSON-RPC: `fundpsbt`/`utxopsbt` `reserve` must be a number, not bool (for `true` use 72/don't specify, for `false` use 0). Numbers have been allowed since v0.10.1.
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Means that field is now optional in JSON output.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `delinvoice` has a new parameter `desconly` to remove description.
LNURL wants this so they can include images etc in descriptions.
Replaces: #4892
Changelog-Added: JSON-RPC: `invoice` has a new parameter `deschashonly` to put hash of description in bolt11.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We keep the parameter around for future use (e.g. PTLC support?), but clboss
master still sets 'style' to "legacy". Accept, but ignore it.
Reported-by: grubman on #c-lightning (IRC)
Changelog-Deprecated: JSON-RPC: `sendpay` `route` argument `style` "legacy" (don't use it at all, we ignore it now and always use "tlv" anyway).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested by @m-schmook, I realized that if we append it later I'll
never get it right: I expect parameters min and max, not max and min!
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Protocol: you can now alter the `htlc_minimum_msat` and `htlc_maximum_msat` your node advertizes.
Based on setchannelfee, but expanded to allow setting max htlc amount (and others
in future?).
The main differences:
1. It doesn't change values which are not specified (that would be hard to
add fields to!)
2. It says exactly what all values are in any potentially changed channels.
Changelog-Added: JSON-RPC: new `setchannel` command generalizes `setchannelfee`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is htlc_maximum_msat in BOLT 7 speak, but this name matches our existing
fields and is clearer in this context.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Dustin Dettmer
Igor Bubelov
Orb
greggzigler
adi2011
niftynei
Vincenzo Palazzo
Seth For Privacy
William Casarin
CC
Christian Decker
grubles
zero fee routing
Michael Schmoock
Simon Vrouwe
grubles
Jan Sarenik
Justin Litchfield
fiatjaf
AutonomousOrganization
Brian Barto
Gregory Sanders
Kristaps Kaupe
Stephen Webel
Clay Shoaf
kiwiidb
Sjors Provoost
Aaron Dewes