"Patrick, I'm sorry I doubted you."
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: Config: `large-channels` is now the default, wumbology for all.
Currently it just defaults to the DEVELOPER compile option, but we'll
move over to this.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `--developer` enables developer options and changes default to be "disable deprecated APIs".
1. announce-addr-discovered-port takes a port option.
2. accept-htlc-tlv-types was deprecated in favor of multiple accept-htlc-tlv-type.
3. Document clnrest.py options.
4. Don't list --version twice in lightningd --help (initial_config_opts calls
opt_register_version() already).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Update the lightningd <-> channeld interface with lots of new commands to needed to facilitate spicing.
Implement the channeld splicing protocol leveraging the interactivetx protocol.
Implement lightningd’s channel_control to support channeld in its splicing efforts.
Changelog-Added: Added the features to enable splicing & resizing of active channels.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `setchannel` adds a new `ignorefeelimits` parameter to allow peer to set arbitrary commitment transaction fees on a per-channel basis.
For anchors, we need some sats sitting around in case we need to CPFP
a close.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `min-emergency-msat` setting for (currently experimental!) anchor channels, to keep funds in reserve for forced closes.
We disabled experimental support for opening non-zero-fee anchor
channels (though old nodes may still have such channels if they turned
that on!).
So we simply call this `experimental-anchors`, since this is the variant
which we expect to be used widely.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: protocol: added support for zero-fee-htlc anchors (`option_anchors_zero_fee_htlc_tx`), using `--experimental-anchors`.
Currently only implemented for min-capacity-sat.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: new command `setconfig` allows a limited number of configuration settings to be changed without restart.
Developers, rejoice (we already have --testnet, --signet and --mainnet!).
Changelog-Added: Config: `--regtest` option as alias for `--network=regtest`
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This obsoletes the use of --announce-addr-dns which I know Michael
didn't really like either.
Changelog-Deprecated: Config: `announce-addr-dns`; use `--bind-addr=dns:ADDR` for finer control.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This is a major cleanup to how we parse addresses.
1. parse_wireaddr now supports the "dns:" prefix to support dns records (type 5).
2. We are less reliant on separate_address_and_port() which gets confused by
that colon.
3. We explicitly test every possible address type we can get back from
parsing, and handle them appropriately.
We update the documentation to use the clearer HOSTNAME vs DNS prefixes now
we also have `dns:` as a prefix.
Changelog-Added: Config: `bind` can now take `dns:` prefix to advertize DNS records.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Build: all experimental features are now runtime-enabled; no more ./configure --enable-experimental-features
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
And no longer insist on opt_quiesce.
Changelog-EXPERIMENTAL: Config: `--experimental-upgrade-protocol` enables simple channel upgrades.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out the two bcli replacements I checked (`sauron` and
`trustedcoin`) don't even implement this, and the multiplier makes
more sense in lightningd, especially as we move to bcli just providing
raw feerate estimates.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Since it's not spec-final yet (hell, it's not even properly specified
yet!) we need to put it behind an experimental flag.
Unfortunately, we don't have support for doing this in a plugin; a
plugin must present features before parsing options. So we need to do
it in core.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This switch was not doing anything useful anymore.
We deprecate it anyways to notify the user about the new switch.
Changelog-Deprecated: The old --disable-ip-discovery config switch
The only time underscores aren't special in Markdown is when they appear
in preformatted text. We have gotten away with not escaping underscores
where an asterisk-enclosed span or the paragraph ends before the next
underscore appears, but this is fragile and bad practice. Conversely,
there are many places where we have not escaped underscores but needed
to.
Escape all underscores that do not appear in preformatted blocks or
preformatted spans and are not themselves delineating emphasized spans.
The changes in this commit are exactly the result of executing the
following Bash code:
```bash
e=':x;' # begin loop
e+='s/^' # anchor match at beginning of line
e+='(' # begin capturing subexpression
e+='(' # begin list of alternatives
e+='[^`_\\]|' # any mundane character, or
e+='`([^`\\]|\\.)*`|' # backtick-enclosed span, or
e+='\b_|_\b|' # underscore at boundary, or
e+='\\.' # backslash-escaped character
e+=')*' # any number of the preceding alternatives
e+=')' # end capturing subexpression
e+='\B_\B/\1\\_/;' # escape non-formatting underscore
e+='tx' # repeat loop if we escaped an underscore
escape_underscores=(
sed
# use extended regular expressions
-E
# skip over indented blocks (following an empty line)
-e '/^$/{:i;n;/^( {4,}|\t)/bi}'
# skip over preformatted blocks
-e '/^\s*```/,/^\s*```/{p;d}'
# skip over generated sections
-e '/GENERATE-FROM-SCHEMA-START/,/GENERATE-FROM-SCHEMA-END/{p;d}'
# escape underscores
-e "${e}"
)
"${escape_underscores[@]}" -i doc/*.[0-9].md
```
Changelog-None
This broke BTCPayServer, so revert. I originally (accidentally!)
implemented this such that it broadcast both DNS and IP entries, but
Michael reported earlier that they still don't propagage well, so
simply suppress them.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5795
Changelog-Changeed: Config: `announce-addr-dns` needs to be set to *true* to put DNS names into node announcements, otherwise they are suppressed.
Changelog-Deprecated: Config: `announce-addr-dns` (currently defaults to `false`). This will default to `true` once enough of the network has upgraded to understand DNS entries.
It's more natural: we will eventually support dynamic config variables,
so this will be quite nice.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Plugins: `autoclean` can now delete old forwards, payments, and invoices automatically.
The old `experimental-accept-extra-tlv-types` is now `accept-htlc-tlv-types`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: Config: `accept-htlc-tlv-types` lets us accept unknown even HTLC TLV fields we would normally reject on parsing (was EXPERIMENTAL-only `experimental-accept-extra-tlv-types`).
This is a good sanity check that users understand that if they upgrade
to master mid-cycle they can't go back!
Suggested-by: @wtogami
Changelog-Added: Config: `--database-upgrade=true` required if a non-release version wants to (irrevocably!) upgrade the db.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
There are no definition lists in Markdown, and lists get mangled if
they follow immediately: they need a line between them.
So use bullets for options, and use an indent so the text gets in the
line below.
Here's a before-and-after example:
```diff
--- /tmp/after 2022-07-20 21:55:54.355487769 +0930
+++ /tmp/after2 2022-07-20 21:58:17.305642576 +0930
@@ -10,38 +10,71 @@
lightning-cli sends commands to the lightning daemon.
OPTIONS
- --lightning-dir=DIR Set the directory for the lightning daemon we're talking to; defaults to $HOME/.lightning.
+ • --lightning-dir=DIR
- --conf=PATH Sets configuration file (default: lightning-dir/config ).
+ Set the directory for the lightning daemon we're talking to; defaults to $HOME/.lightning.
- --network=network --mainnet --testnet --signet Sets network explicitly.
+ • --conf=PATH
- --rpc-file=FILE Named pipe to use to talk to lightning daemon: default is lightning-rpc in the lightning directory.
+ Sets configuration file (default: lightning-dir/config ).
- --keywords/-k Use format key=value for parameters in any order
+ • --network=network
- --order/-o Follow strictly the order of parameters for the command
+ • --mainnet
- --json/-J Return result in JSON format (default unless help command, or result contains a format-hint field).
+ • --testnet
- --raw/-R Return raw JSON directly as lightningd replies; this can be faster for large requests.
+ • --signet
- --human-readable/-H Return result in human-readable output.
+ Sets network explicitly.
- --flat/-F Return JSON result in flattened one-per-line output, e.g. { "help": [ { "command": "check" } ] } would become
+ • --rpc-file=FILE
+
+ Named pipe to use to talk to lightning daemon: default is lightning-rpc in the lightning directory.
+
+ • --keywords/-k
+
+ Use format key=value for parameters in any order
+
+ • --order/-o
+
+ Follow strictly the order of parameters for the command
+
+ • --json/-J
+
+ Return result in JSON format (default unless help command, or result contains a format-hint field).
+
+ • --raw/-R
+
+ Return raw JSON directly as lightningd replies; this can be faster for large requests.
+
+ • --human-readable/-H
+
+ Return result in human-readable output.
+
+ • --flat/-F
+
+ Return JSON result in flattened one-per-line output, e.g. { "help": [ { "command": "check" } ] } would become
help[0].command=check. This is useful for simple scripts which want to find a specific output field without parsing
JSON.
- --notifications/-N=LEVEL If LEVEL is 'none', then never print out notifications. Otherwise, print out notifications of
- LEVEL or above (one of io, debug, info (the default), unusual or broken: they are prefixed with # .
+ • --notifications/-N=LEVEL
+
+ If LEVEL is 'none', then never print out notifications. Otherwise, print out notifications of LEVEL or above (one of
+ io, debug, info (the default), unusual or broken: they are prefixed with # .
+
+ • --help/-h
+
+ Pretty-print summary of options to standard output and exit. The format can be changed using -F, -R, -J, -H etc.
+
+ • --version/-V
- --help/-h Pretty-print summary of options to standard output and exit. The format can be changed using -F, -R, -J, -H
- etc.
+ Print version number to standard output and exit.
- --version/-V Print version number to standard output and exit.
+ • allow-deprecated-apis=BOOL
- allow-deprecated-apis=BOOL Enable deprecated options. It defaults to true, but you should set it to false when testing to
- ensure that an upgrade won't break your configuration.
+ Enable deprecated options. It defaults to true, but you should set it to false when testing to ensure that an upgrade
+ won't break your configuration.
COMMANDS
lightning-cli simply uses the JSON RPC interface to talk to lightningd, and prints the results. Thus the commands avail‐
@@ -60,13 +93,13 @@
this is not encouraged.
EXAMPLES
- 1. List commands
+ 1. List commands:
- lightning-cli help
+ • lightning-cli help
- 2. Fund a 10k sat channel using uncomfirmed outputs
+ 2. Fund a 10k sat channel using uncomfirmed outputs:
- lightning-cli --keywords fundchannel id=028f...ae7d amount=10000sat minconf=0
+ • lightning-cli --keywords fundchannel id=028f...ae7d amount=10000sat minconf=0
BUGS
This manpage documents how it should work, not how it does work. The pretty printing of results isn't pretty.
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
`lightningd` has an option --wallet that lets you supply a database dsn
string to connect to a sqlite3/postgres database that's hosted/stored
elsewhere.
This adds the `--bookkeeper-db` option which does the same, except for
the bookkeeping data for a node!
Note that the default is to go in the `lightning-dir` in a database
called `accounts.sqlite3`
It actually only sets the prefix for the lightningd core log messages;
the other logs have their own prefix.
Make it a real, process-wide prefix which actually goes in front of the timestamp.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Fixed: options: `log-prefix` now correctly prefixes *all* log messages.
That's useful for "tell me everything about this node" debugging.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Fixes: #5348
Changelog-Added: lightningd: `log-level=debug:<partial-nodeid>` supported to get debug-level logs for everything about a peer.
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
Alex Myers
Chris Guida
ShahanaFarooqui
Dusty Daemon
adi2011
Michael Schmoock
Simon Vrouwe
Matt Whitlock
niftynei
Vincenzo Palazzo