```
> raiseValueError(str(errors))
E ValueError:
E Node errors:
E Global errors:
E - Node /tmp/ltests-x5sfpiwp/test_openchannel_hook_chaining_1/lightning-2/ has memory leaks: [
E {
E "backtrace": [
E "ccan/ccan/tal/tal.c:442 (tal_alloc_)",
E "ccan/ccan/io/io.c:91 (io_new_conn_)",
E "lightningd/subd.c:773 (new_subd)",
E "lightningd/subd.c:827 (new_channel_subd_)",
E "lightningd/opening_control.c:870 (peer_start_openingd)",
E "lightningd/peer_control.c:1307 (peer_active)",
E "lightningd/connect_control.c:457 (connectd_msg)",
E "lightningd/subd.c:556 (sd_msg_read)",
E "lightningd/subd.c:357 (read_fds)",
E "ccan/ccan/io/io.c:59 (next_plan)",
E "ccan/ccan/io/io.c:407 (do_plan)",
E "ccan/ccan/io/io.c:417 (io_ready)",
E "ccan/ccan/io/poll.c:453 (io_loop)",
E "lightningd/io_loop_with_timers.c:22 (io_loop_with_timers)",
E "lightningd/lightningd.c:1181 (main)",
E "../csu/libc-start.c:308 (__libc_start_main)"
E ],
E "label": "ccan/ccan/io/io.c:91:struct io_conn",
E "parents": [
E "lightningd/lightningd.c:107:struct lightningd"
E ],
E "value": "0x2b5a898"
E }
E ]
```
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Get it to log direct to stdout, so we see what's happening *as it
happens* rather than as we read it. We could restore the thread we
were using before, but that added more problems than it solved.
This means that we need the hsm password prompts in the log though.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
1. We set an outgoing htlc's `failonion` when we get a commitment_signed.
2. We don't transfer it to the corresponding incoming HTLC until we send
commitment_signed and receive revoke_and_ack (meaning, outgoing htlc is
completely dead).
3. If between these steps we go onchain, onchaind (after 3 blocks) tells us
to fail the HTLC.
4. hout->failonion is set, but hout->hin has not been failed yet. We
do a sanity check and print a nasty message, and fail it with
WIRE_PERMANENT_CHANNEL_FAILURE instead of relaying the error.
So handle this case explicitly.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I've wanted this for a while: the ability to log to multiple places
at once.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: lightningd: `log-file` option specified multiple times opens multiple log files.
Changelog-Fixed: signmessage: improve the UX of the rpc command when zbase is not a valid one
Stacktrace generated with a bad `zbase`
```
lightningd: lightningd/signmessage.c:59: from_zbase32: Assertion `len == tal_bytelen(u8arr)' failed
lightningd: FATAL SIGNAL 6 (version v0.11.1)
0x55b9b1b4e617 send_backtrace
[...]
```
Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
This is being hit: it's possible if connectd and lightningd get desynchronized,
and we'll handle this later when peer is activated.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We should be using amount_msat always. Many tests were not. Plus,
deprecating it simplifies the code.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSONRPC: `sendpay` `route` elements `msatoshi` (use `amount_msat`)
This is consistent with our output changes, and increases consistency.
It also keeps future sanity checks happy, that we only use JSON msat
helpers with '_msat' fields.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Changed: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice`: `msatoshi` argument is now called `amount_msat` to match other fields.
Changelog-Deprecated: JSON-RPC: `invoice`, `sendonion`, `sendpay`, `pay`, `keysend`, `fetchinvoice`, `sendinvoice` `msatoshi` (use `amount_msat`)
The new msat fields are turned into Millisatoshi, so handle that correctly
too in tests too.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `coin_movement` notification: `balance`, `credit`, `debit` and `fees` (use `balance_msat`, `credit_msat`, `debit_msat` and `fees_msat`)
In general, we don't like to use `null` in JSON: simply omit the
field. I found this one because it broke our 'msat' parsing (made
stricter in followup) which doesn't allow `null`.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: `listconfigs` `plugins` `options` which are not set are omitted, not `null`.
We had json_add_amount_msat_only(), which was designed to be used to
print out msat fields, if we had sats.
However, we misused it, so split it into the three different cases:
1. json_add_amount_sat_msat: We are using it correctly, with a field called
xxx_msat.
2. json_add_amount_sats_deprecated: We were using it wrong, so deprecate
the old field and create a new one which does end in _msat.
3. json_add_sats: we were using it to hand sats as a JSON parameter to an
interface, where "XXXsat".
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: Plugins: `rbf_channel` and `openchannel2` hooks `their_funding` (use `their_funding_msat`)
Changelog-Deprecated: Plugins: `openchannel2` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `funding_satoshis` (use `funding_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `dust_limit_satoshis` (use `dust_limit_msat`)
Changelog-Deprecated: Plugins: `openchannel` hook `channel_reserve_satoshis` (use `channel_reserve_msat`)
Changelog-Deprecated: Plugins: `channel_opened` notification `amount` (use `funding_msat`)
Changelog-Deprecated: JSON-RPC: `listtransactions` `msat` (use `amount_msat`)
Changelog-Deprecated: Plugins: `htlc_accepted` `forward_amount` (use `forward_msat`)
Changelog-Added: Plugins: `htlc_accepted` now exposes the `short_channel_id` for the channel from which that HTLC is coming from and the low-level per-channel HTLC `id`, which are necessary for bridging two different Lightning Networks when MPP is involved.
When starting a plugin, if the plugin path cannot be found in
absolute context, assume it is a relative path to the default
plugins dir. As a result, the following now works when my_plugin.py
is installed in the default plugins dir:
lightning-cli plugin start my_plugin.py
Also update the plugin documentation to reflect that the use of a
relative path is now available.
Changelog-Added: plugin start RPC subcommand now assumes relative path to default plugins dir if the path is not found in absolute context. i.e. lightning-cli plugin start my_plugin.py
[ Squashed two commits into one -- RR ]
Per BIP-0171, the signature map is of pubkey to "The signature as would
be pushed to the stack from a scriptSig or witness".
Fixes 5298
Changelog-Fixed: PSBT: Fix signature encoding to comply with BIP-0171.
Signed-off-by: Jon Griffiths <jon_p_griffiths@yahoo.com>
We call out to connectd to activate the peer, and while we do that,
channel->owner is NULL. A better pattern would be to set up the unsaved
channel once connectd has given us the peer, but this works for now.
Fixes: #5204
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This seems to prevent broad propagation, due to LND not allowing it. See
https://github.com/lightningnetwork/lnd/issues/6432
We still announce it if you disable deprecated-apis, so tests still work,
and hopefully we can enable it in future.
Fixes: #5196
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: Protocol: disabled websocket announcement due to LND propagation issues
Mostly comments and docs: some places are actually paths, which
I have avoided changing. We may migrate them slowly, particularly
when they're user-visible.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This adds config and commandline options for htlc_min_msat, htlc_max_msat and
announce_discovered_ip. The default is 0msat for htlc_min_msat, unlimited for
htlc_max_msat and enabled for announce_discovered_ip.
The announce_discovered_ip gets the disable commandline switch --disable-ip-discovery
Changelog-added: Config options for htlc_min_msat, htlc_max_msat and announce_discovered_ip.
Makes types harder, and I've never personally used them.
Changelog-Deprecated: JSON-RPC: `invoice` `expiry` no longer allowed to be a string with suffix, use an integer number of seconds.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We do this (send warnings) in almost all cases anyway, so mainly this
is a textual update, but there are some changes:
1. Send ERROR not WARNING if they send a malformed commitment secret.
2. Send WARNING not ERROR if they get the shutdown_scriptpubkey wrong (vs upfront)
3. Send WARNING not ERROR if they send a bad shutdown_scriptpubkey (e.g. p2pkh in future)
4. Rename some vars 'err' to 'warn' to make it clear we send a warning.
This means test_option_upfront_shutdown_script can be made reliable, too,
and it now warns and doesn't automatically close channel.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't have an effect now (except in experimental mode), but it
will when we support anchors. So we deprecate the use of those in the
close command too.
For experimental mode we have to avoid using p2pkh; adapt that test.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Deprecated: JSON-RPC: `shutdown` no longer allows p2pkh or p2sh addresses.
Regenerate from current BOLTS via `make extract-bolt-csv`
1. The remote_addr field was added manually into peer_wire.csv: this
needs to be a patch otherwise it vanishes on regen.
2. We never brought into the channel_disabled fields, because it was
too much hassle (we never actually generate this!). Do it now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Gossipd didn't actually suppress all gossip, resulting in a flake!
Doing it in connectd now makes much more sense.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Suggested-by: @t-bast
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Added: JSON-RPC: `listforwards` has new entry `style`, currently "legacy" or "tlv".
Partial revert of 43a833e405
"lightningd: remove support for legacy onion format."; we restore the
ability to decode legacy onions for forwarding, but not to generate them.
(We don't accept them properly since making payment_secret compulsory
anyway, so no real change there!)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-Removed: Protocol: ... but we still forward legacy HTLC onions for now.
These trip when anything weird happens; turns out that we tell
onchaind about old htlcs (e.g. for penalties), so in that case we can
actually have it tell us about missing HTLCs which we no longer have
in memory.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This doesn't actually fix anything, but may shed more clues if it
happens again.
The broken() logs are overzealous, see next patch.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We get some memleak reports because ld owns the subd, but once
the peer/channel is freed, there's no reference for the brief time
until the subd exits.
This happens for both opening and closingd. For openingd, the
peer owns it, for others (including dualopend) the channel owns it.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I removed these prematurely: we *haven't* had a release since
introducing them!
This consists of reverting d15d629b8b
"plugins/fetchinvoice: remove obsolete string-based API." and
plugins/fetchinvoice: remove obsolete string-based
API. "onion_messages: remove obs2 support."
Some minor changes due to updated fromwire_tlv API since they
were removed, but not much.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-EXPERIMENTAL: REVERT: Removed backwards compat with onion messages from v0.10.1.
Rusty Russell
Vincenzo Palazzo
pn
fiatjaf
Michael Schmoock
Brian Barto
Jon Griffiths
Michael Dance