This will allow the dynamic starting code to use them too.
Also lets us move dev_debug_subprocess under #if DEVELOPER.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We use the new function `plugins_free` to define the correct deallocation
order on shutdown, since under normal operation the allocation tree is
organized to allow plugins to terminate and automatically free all dependent
resources. During shutdown the deallocation order is under-defined since
siblings may get freed in any order, but we implicitly rely on them staying
around.
common/onion is going to need to use this for the case where it finds a blinding
seed inside the TLV. But how it does ecdh is daemon-specific.
We already had this problem for devtools/gossipwith, which supplied a
special hsm_do_ecdh(). This just makes it more general.
So we create a generic ecdh() interface, with a specific implementation
which subdaemons and lightningd can use.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Turns out that unnecessary: all callers can access the feature_set,
so make it much more like a normal primitive.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now that we have json_stream in common/, we can move all the related
helpers from lightningd/json to common/json. This way everyone can
benefit of them (including libplugin, the plugins themselves,
potentially lightning-cli), not lightningd alone!
Note that the Makefile of the common/test/ had to be modified, because
the new helpers make use of common/wireaddr... Which turns out to
\#include <lightingd/lightningd.h> ! So we couldnt just include the .c
and add mocks if we redefined some structs (hello run-param).
Changelog-Added: lightningd: Added --subdaemon command to allow alternate subdaemons.
[ Wow, that was mammoth; 44 comments over 12 commits. Feels almost unfair to squash it into one commit, so I wanted to note @ksedgwic's perseverence here! --RR ]
This is needed to fully implement handling of blockheight disagreements
between us and payee.
If payee believes the blockheight is higher than ours, then `pay`
should wait for our node to achieve that blockheight.
Changelog-Add: Implement `waitblockheight` to wait for a specific blockheight.
This is a transient field, so rework things so we don't leave it in
struct htlc_out. Instead, load htlc_in first and connect htlc_out to
them as we go.
This also changes one place where we use it instead of the am_origin
flag.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This simplifies our tests, too, since we don't need a magic option to
enable io logging in subdaemons.
Note that test_bad_onion still takes too long, due to a separate minor
bug, so that's marked and left dev-only for now.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This allows finegrained logging control of particular subdaemons or
subsystems.
To do this, we defer setting the logging levels for each log object
until after early argument parsing (since e.g. "bitcoind" log object
is created early).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Options: log-level can now specify different levels for different subsystems.
1. Printed form is always "[<nodeid>-]<prefix>: <string>"
2. "jcon fd %i" becomes "jsonrpc #%i".
3. "jsonrpc" log is only used once, and is removed.
4. "database" log prefix is use for db accesses.
5. "lightningd(%i)" becomes simply "lightningd" without the pid.
6. The "lightningd_" prefix is stripped from subd log prefixes, and pid removed.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Changelog-changed: Logging: formatting made uniform: [NODEID-]SUBSYSTEM: MESSAGE
Changelog-removed: `lightning_` prefixes removed from subdaemon names, including in listpeers `owner` field.
We had a separate logbook for each peer, and copy log entries above
the printable log level into the master logbook. This didn't always
work well, since we didn't dump it on crash for example.
Keep a single global logbook instead, and remove this infrastructure.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
A log can have a default node_id, which can be overridden on a per-entry
basis. This changes the format of logging, so some tests need rework.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I thought LND had a bug, but turns out it doesn't like out-of-order
short_channel_ids: in fact, the spec says they have to be in order!
This means we use uintmap instead of a htable for unknown_scids and
stale_scids so they're nicely ordered.
But our nodes-missing-announcements probe is harder since they can
also contain duplicates: we switch that to iterate through channels
rather than nodes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This will let gossipd be more intelligent about gossiping before we're
synced, and also it might know how far behind we are.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
We now have a much stronger consistency check from the combination of
transaction wrapping, tal memory leak detection. Tramsaction wrapping ensures
that each statement is executed before the transaction is committed. The
commit is also driven by the `io_loop`, which means that it is no longer
possible for us to have statements outside of transactions and transactions
are guaranteed to commit at the round's end.
By adding the tal-awareness we can also get a much better indication as to
whether we have un-freed statements flying around, which we can test at the
end of the round as well.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
We will soon generalize the DB, so directly reaching into the `struct db`
instance to talk to the sqlite3 connection is bad anyway. This increases
flexibility and allows us to tailor the actual implementation to the
underlying DB.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
Dumb programs which have a --daemon option call fork() early. This is
terrible UX since startup errors get lost: the program exits with
"success" immediately then you discover via the logs that it didn't
start at all.
However, forking late introduced a heap of problems with changing
pids. Instead, fork early but keep stderr and the parent around: if
we fail early on, the parent fails with us. We release our parent
with an explicit action just before the main loop.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
I noticed that --network=regtest didn't override 'network=bitcoin' in
the config file.
Normally we parse the config file first, then the commandline (so the cmdline
wins). But for early options, we do cmdline first so we can find the config
file. That was fine when the only early option was the location of the
config file, but now it includes plugins and the network setting.
So do a boutique cmdline parse *just* to find the config file, then parse
the config file early options, then the cmdline early options.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
The spec says to close the channel if they send us an error, but we
need to be more lenient to preserve channels with other
implementations.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
- Related Changes for `warning` notification
Add a `bool` type parameter in `log_()` and `lov()`, this `bool` flag
indicates if we should call `warning` notifier.
1) The process of copying `log_book` of every peer to the `log_book` of
`ld` is usually included in `log_()` and `lov()`, and it may lead to
repeated `warning` notification. So a `bool`, which explicitly indicates
if the `warning` notification is disabled during this call, is necessary
.
2) The `LOG_INFO` and `LOG_DEBUG` level don't need to call
warning, so set that `bool` paramater as `FALSE` for these log level and
only set it as `TRUE` for `LOG_UNUAUSL`/`LOG_BROKEN`. As for `LOG_IO`,
it use `log_io()` to log, so we needn't think about notifier for it.
We reserve inputs when we're going to send a transaction, but we don't
unreserve them if we crash. This is most graphically demonstrated by
the txprepare case, which makes it easier to trigger.
Instead, we should query bitcoind to see whether the tx made it out or
not, as we would do manually with dev-rescan-outputs.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Encapsulating the peer state was a win for lightningd; not surprisingly,
it's even more of a win for the other daemons, especially as we want
to add a little gossip information.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
These are always handed to subdaemons as a set, so group them. This makes
it easier to add an fd (in the next patch).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Pubkeys are not not actually DER encoding, but Pieter Wuille corrected
me: it's SEC 1 documented encoding.
Results from 5 runs, min-max(mean +/- stddev):
store_load_msec,vsz_kb,store_rewrite_sec,listnodes_sec,listchannels_sec,routing_sec,peer_write_all_sec
38922-39297(39180.6+/-1.3e+02),2880728,41.040000-41.160000(41.106+/-0.05),2.270000-2.530000(2.338+/-0.097),44.570000-53.980000(49.696+/-3),32.840000-33.080000(32.95+/-0.095),43.060000-44.950000(43.696+/-0.72)
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
They're generally used pass-by-copy (unusual for C structs, but
convenient they're basically u64) and all possibly problematic
operations return WARN_UNUSED_RESULT bool to make you handle the
over/underflow cases.
The new #include in json.h means we bolt11.c sees the amount.h definition
of MSAT_PER_BTC, so delete its local version.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Next patch will call commands to get usage inside jsonrpc_new(): to do
this it will need access to ld->jsonrpc, so we can't use the current
pattern.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
json_escaped.[ch], param.[ch] and jsonrpc_errors.h move from lightningd/
to common/. Tests moved too.
We add a new 'common/json_tok.[ch]' for the common parameter parsing
routines which a plugin might want, taking them out of
lightningd/json.c (which now only contains the lightningd-specific
ones).
The rest is mainly fixing up includes.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This currently just invokes GDB, but we could generalize it (though
pdb doesn't allow attaching to a running process, other python
debuggers seem to).
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
This tells the plugin both the `lightning-dir` as well as the
`rpc-filename` to use to talk to `lightningd`. Prior to this they'd
had to guess.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is needed in order to be able to add methods while initializing
the plugins, but before actually moving to the config dir and starting
to listen.
Signed-off-by: Christian Decker <decker.christian@gmail.com>
This is the final step to get the plugins working. After parsing the
early options (including `--plugin`), then starting and asking the
plugins for options, and finally reading in the options we just
registered, we just need to assemble the options and send them over.
Signed-off-by: Christian Decker <@cdecker>
Also includes some sanity checks for the results returned by the
plugin, such as ensuring that the ID is as expected and that we have
either an error or a real result.
The idea is that `plugin` is an early arg that is parsed (from command
line or the config file). We can then start the plugins and have them
tell us about the options they'd like to add to the mix, before we
actually parse them.
Signed-off-by: Christian Decker <@cdecker>
Code changes:
1. Expose daemon_poll() so lightningd can call it directly, which avoids us
having store a global and document it.
2. Remove the (undocumented, unused, forgotten) --rpc-file="" option to disable
JSON RPC.
3. Move the ickiness of finding the executable path into subd.c, so it doesn't
distract from lightningd.c overview.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Rusty Russell
lisa neigut
Christian Decker
darosior
Ken Sedgwick
Vasil Dimov
ZmnSCPxj
trueptolemy